SIMARTECH
CHANDIGARH
One Stop Source
for
Total Turnkey Electrical Solutions from Design to Commissioning
Manufacturers of Panels & Other Electrical Distribution Equipments
-------------TURNKEY ELECTRIC CONTRACTORS-------------
INTRODUCTION
Company is into second generation management of ‘Total
Turnkey
Electrical
Solutions
from
Design
to
Commissioning’. Activities were started in 1969. In April
2003 under aegis of Charanjit Singh, a second generation
technical qualified & experienced person, re-organized whole
business structure. Accordingly activities were divided into
following three companies:
SIMARTECH CONTROLS
(Excise Free Manufacturing Units)
SIMARTECH PROJECTS & SERVICES LTD
(Project Management / Contracts / Installations, etc)
CHANDIGARH ELECTRO CONTROLS
(Testing Lab & Servicing Unit)
Commonly known as ‘SIMARTECH’, is a specialized established group
company owned & managed by technical experienced widely traveled
persons.
Corporate Office:
Industrial Area II, Chandigarh
Other Offices:
1. Gurgaon / Delhi
2. Mumbai
We got three manufacturing units in India –
Unit I – Industrial Area II, Chandigarh
Unit II - Industrial Area, Baddi, HP
Unit III - Davni, Baddi, HP
We are:
ISO 9001 : 2008 Certified
Certified ‘A’ Class Electrical Contractor
ABB Ltd approved Business Intregator
RANGE OF SERVICES
PROJECT MANAGEMENT / CONTRACTORSHIP SERVICES

Design / estimation of electrical installation for all types of projects

Installation, testing and commissioning of switchyard / substation conventional
/ gas insulated upto 132 KV

Installation, testing and commissioning of DG sets

Internal plant cabling and earthling for power & lighting

Dehydration / Filtration of transformer oil

Annual Contracts

Grid Synchronizing

Electrification of Industrial Projects

Lighting Control Systems
-----------TURNKEY ELECTRIC CONTRACTORS-----------
RANGE OF PRODUCTS / WORKS
We are one of leading quality manufacturers of MV 11KV & LV 415/433V Panels as per
Indian & International standards / guidelines. Our product range is-
(a)

11KV VCB / SF6 & 33 KV, VCB / SF6 Panels

C & R Panels

Power Control Centre ( PCCs ) – Electrical & Mechanical Interlocking

Motor Control Centre ( MCCs) – VFD’s , Soft Starters, Star Delta, DOL

Auto PF Control Panels

Marshalling Box

Metering Panels

Energy Data Communication Systems – RS 485, R232 Communications

Scada Systems – Switchgear Operation & Data Monitoring

DG Set Panels / AMF / Synchronizing Panels – Micro process based AMF Controllers

Machine Control Panels

Bus Bar Ducts Aluminium / Copper

Distribution Board ( DBs )

Switch Boards as per requirement
(b)
 Racks / Cabinets
 Junction Boxes
 Perforated / Ladder type Cable Trays coated / galvanized
 Raceway / Trunking
(c)
 Sheet Metal Fabrication for Electrical, Electronics & Telecommunication
Besides,
a
complete
assortment
of
products
SIMARTECH also offers several supporting services.
and
panels,
TESTS FROM CPRI
Company has following type test approval from CPRI, Bhopal
 STC for 40 KA as per cl. 6.6(a) of IEC 62271-100, 2008 &
IEC 62271-200, 2003
 STC for 26.3 KA as per cal. 6.6(a) of IEC 62271-200,2003
 Temp. Rise Test as per IEC 62271-100, 2008
 Dry Power Frequency Voltage Withstand Test
MAIN / SALIENT FEATURES OF PRODUCTS
(a) Common features for all Panels:

Panel body manufactured as per IS 2147 dust and vermin proof.

Degree of protection IP 52 or as per requirement of client.

Testing as per IS i.e. HV test upto 2.5KV/35KV, Insulation test, Load
Test and Operational Test, Milli Volt Drop Test, Primary Current
Injection upto 4000A Secondary Current Injection Test, CT/PT polarity
and Ratio Test, Relay Tripping with time test.

Pre treatment of sheet metal in process as IS 6005.

Having options for Single front accessible or duplex type.
Contd …….









Gasket of EVA a foam material having very long life and perfect
sealing.
Indal AL bus bars as per the company’s chart.
Heat shrinking sleeves for bus bars with colour coding.
Wiring with duly numbering and in specific system wire size not less
than 1.5 MMSQ with copper conductor only.
Outgoing terminal with clip-on terminal blocks/bus bar type
connections as per rating of outgoing feeders.
Identification feeder name plates duly engraved on each feeder
showing the incoming and outgoing.
Bus Bar supports of SMC (Sheet Moulding Compound) or DMC
(Dough Moulding Compound) having high
Dielectric Strength, High Mechanical Strength, Non Flammable
properties, High Comparative Tracking Index,
very low water absorption and ability to withstand high
temperatures.
Special features of Load Break Switch:










Switches tested in CPRI as per IS-9920 (=IEC265)
Complies with IEC, VDE & IS
Special tubular arc-chutes
Simple driving mechanism: Motorised with facility of operation from remote
(switching ON & OFF) and manually operated facility of switching off from
remote.
Versatile: can be used for switching Transformer feeders, overhead lines,
capacitor banks, cable feeders and for ring mains.
Easy inspection: Current interruption with visible arcs.
High operating reliability: Permits load connections even under short circuit
condition, without danger to the operating personnel.
High speed(snap action) make and break ensures a fast switching action and
the very special design of arc chutes have excellent extinguishing properties
for both high and low currents.
High dynamic and thermal strength.
Easy Maintenance.
Special features of HT VCB Panel:

Metal clad construction - all compartments are segregated
from each other with metal sheets. Standalone panel can be
added one by one to make complete switch board.

Panel’s GA is similar to ABB's Unisafe panel - can be coupled with
existing ‘unisafe panel’ of directly without any adopter panel.

IP4X degree of protection.

Independent exhaust vents for all HT Compartments.

Independent bus bar for each panel (copper or aluminium)
with future extension provision.
MANUFACTURING FACILITIES
PRODUCTION
•
1500W CNC Laser Cutting Machine.
•
CNC Turret Punch Press upto 6mm thickness 30 station with auto Index
•
CNC Brake Press 3.0 metres
•
Shearing Machine 8mm x 3.0 metres
•
Deep Drawing Press 200 Ton
•
Deep Drawing Hydraulic Press 150 Ton
•
Power Presses from 10 Ton to 100 Ton capacity
•
CVS Horizontal Bandshaw
MACHINE SHOP
Lathe Machine
Milling Machine
Drilling Machines
Welding Sets ( TIG, MIG, SPOT )
Grinder Machines ( Portable, Surface )
Gas Cutting Set
FINISHING
Facilities available for:
- Powder Coating
- Anodizing
- Electro Plating
- Hot Dip Galvanized
- Phosphating
TESTING
Testing facility as per Indian & International Standards requirement.
CPRI Type tests, 50kA 415V Panel, IP55 Panel, Temperature Rise Test, 26.3kA
and 40kA on 11kV Panel.
Primary Current Injection Test Kit – Rating 0-4000A
Secondary Injection Relay Test Kit – Rating 0-100A
High Voltage Test Kit - Upto 100KV
Time Testing Kit – Range 0-999ms
Electronic Insulation Tester - 15 Tohm (5KV) & 35Tohm (10KV)
Automatic Relay Test Set - Computer Operated
Contd …..
Earth Resistivity Measuring Kit (Electronic)
Under & Over Voltage Test Kit
Contact Resistance Test Kit - 0.1 micro-ohm Sensitivity
Oil BDV Test Kit - Upto 60KV
DC Winding Resistance Test Kit - Upto 800 m ohm
Phase Sequence Meter
Single phase voltage variac - 0-300V
Three phase voltage variac – 0-500V
Three Phase Transformer Turns Ratio Test Kit
Tongtesters
Multimeters
Gauges / Micrometers / Vernier Caliper / Marking Tables
Project
Engineer
ORGANISATION CHART
Director Operation
G.M.
Projects
Safety
Officer
G.M.
Marketing
Project
Purchase
Electrical
Engineers
G.M.
Production
Manager
Administratio
n & Accounts
Store
Incharge
Accounts
Officer
G.M. Maintenan
after
Sales Services
Quality
Engineer
Electrical
Engineer
Production
Incharge
Supervisor
LIST OF CUSTOMERS
CONTACT DETAILS
Head Office:
749 Industrial Area, Phase II, Chandigarh – 160002
Ph: 2655540 / 6575749 Fax: 2653138
Mob: 92161-19009 / 98720-98408
Email:
NCR Delhi Office:
Malibu Towne, Sohna Road, Gurgaon – 122018
Ph: 0124-4251313
Mumbai Office:
E-401 ‘Olympia’ Royal Complex, Sector X
Mira Road ( East ), Thane – 401 107
Ph: 022-28123163
Works:
Unit 1. Plot No. 9-G Apparel Park-cum-Industrial Area
Katha, Baddi – 173205 (HP)
Ph: 01795-275051
Unit 2. Plot No. 98 HPSIDC Industrial Estate
Davni, Baddi – 173205 (HP)
Ph: 01795 - 275053
Manufacturing facility at Baddi ( HP )
Assembly hall for manufacturing of panels
Projects Executed
12MW Co-Gen Plant of Wahid Sandhar Sugars Limited at Phagwara Punjab,
All Panels installed at 12 Meter height. (Site Erection time view)
Panels for Karan Polypack - Nalagarh
For Dantal Hydraulics Manesar Gurgaun (Haryana)
11kV Panels
33kV Switchyard for Asian Cements – Nalagarh ( HP )
Cable Tray, Cabling & Light installation at a project
Project Asian Cements – Nalagarh Total Load 8 MW
Total scope was 33kV Sub Station 6.6kV Motors, 415V Electrification, including instrumentation and
control cabling, complete including supply of 33kV, 6.6kV & 415V Panels