SGH-A800

IMEI Writing Program
We need to write IMEI to the phone.
When
OGM is broken of some reasons and so on
2

Equipments for IMEI Program
PC
JIG Converter
RS232 cable
9 pin RS232 cable (connect PC with JIG)
25 pin RS232 cable (connect Mobile with JIG)
3

Equipments Setting (BOOT ON)
(voltage = 3.6 ~ 4.0 V)
25pin RS232 cable
BOOT : ON
POWER : ON
9pin RS232 cable
(com1 or com2 port)
4

IMEI Program Execution
1.Select Country only.
Rest of them is for factory.
5
2.Click the Write IMEI button
The EXIT button is for quitting IMEI PGM

IMEI Program ( Settings )
Confirm the MMI DATA
Confirm the WAP DATA
1.Click OK button
Cancel button go back
6

IMEI Program (Cont.)
7
Read Window
1.Click the RD IMEISetting button
Click the EXIT button if we want to quit

IMEI Program (Cont.)
From the Read Window We can easily know S/W and H/W version, IMEI, etc
8
1.If We want to change IMEI, then
Click the NEW button and input IMEI
Click the EXIT button if we want to quit

IMEI Program (Cont.)
9
2.Input Password which is from www.anysvcmobile.com
1.Click the WrtIMEI button

http://www.anysvcmobile.com
1.Select IMEI Security
2.Specify generated number
From the IMEI Program
10

http://www.anysvcmobile.com
11
Check the key

IMEI Program (Cont.)
12
1.Input Password

IMEI Program (Cont.)
Warning:Check that “6.Config UART” is “Data” in the phone *#8999*8378#
1.Confirm PASS
2.Confirm the IMEI number
3.Confirm NetLock & Settings
We can see the Current Status
Click the EXIT button if we want to quit
13

Version and NetLock
S/W Ver :
We can check S/W Version with a phone ( *#9999# )
H/W Ver :
We can check H/W Version with a phone
(*#8999*8378# and then select “ 1.Version
” )
NetLock :
1. 00000000 - level of Lock
2. 00000 - NCK ( MCC(3) + MNC(2) )
3. 00000000 - NCK
4. 00000000 - SCK
5. 00000000 - SPCK
6. 98552630 - MCK
14

Settings
1. Phone : Samsung SGH-A800 GSM Dualband( Greeting Message ) /
00 (Language) / fren(TextLanguage(2)+VoiceLanguage(2)) /
00000109(T9Language) / 00000109(InputMode) /
01(BackLight) / 01(ServiceLight) / 00(ActiveFlip) / 00(SideKey)
2. Tone : 0030(RingTone) / 0030(RingTone2) / 01(RingType) / 04(RingLevel) /
04(SpkLevel) / 04(KeyLevel) / 04(OgmLevel) / 01(MsgAlertType) /
0026(MsgTone) / 01(MsgAlertRepetition) / 04(KeyTone) / 01(ErrTone) /
01(CallConnTone) / 0000(AlarmTone) / 00(MinuteMinder) / 00(QuietMode) /
04(HFKRingLevel) / 04(HFKSpkLevel) / 04(HFKKeyLevel) / 04(HFKOgmLevel)
3. Extra : 00(AutoAntenna) / 00(AutoFlip) / 00(SetAnsp) / 01(AnykeyAnswer) /
00(AutoRedial) / 00(AutoAnswer) / 00(SetCallerID) / 01(ActLine) / 00(ScrMode)
/ 00(ExtScrMode) / 00(Bmp) / 00(IdleModeNo) / 01(ImageNo) /
00(ClockImageNo) / 06(LcdContrast) / 06(ExtLcdContrast)
15