Aerospace Industry
Impeller Inspection
May, 2011
Aerospace Industry
• Customer References
Aerospace Industry
• Impeller
Aerospace Industry
• Section Deviation
Aerospace Industry
• Whole Deviation - Thickness
Aerospace Industry
• Revolving Silhouette Deviation
Aerospace Industry
• Report
Rapidform Products
One and Only Software to Create
Parametric CAD model from 3D scan data
Next generation total RE Solution
Turn raw scan data into water-tight clean meshes, NURBS patches, or fully
editable Solid/Surface models.
Rebuild original design intent, not only shape
State-of-the-art tools to find out design intent implied in geometry with a click
of button such as revolving profile, drafting angle, pipe center lines, varying
fillet radius, drill parameters, and dozens more.
Many times faster than existing solutions
Unique automated tools such as Mesh Buildup Wizard, Lofting Wizard (auto
lofting), CAD-Correct, etc. can save thousands % of redesign time compared to
any other processes.
Maintain confidence with real time accuracy checker
With Accuracy Analyzer™ , you can check the deviation between scan data and
redesigned bodies in real time whenever you adjust feature parameters as
adding or editing features in 2D sketch, 3D sketch, and solid/surface modeling
Familiar interface for CAD users
History based solid and surface modeling is fully supported with commonly
adopted GUI layouts which can reduce learning curve.
Transfer the design history to your CAD environment
As well as exporting dumb solid/surface bodies, XOR enables you to reconstruct
feature modeling history in SolidWorks, Pro/E, and UG NX through
liveTransfer™ technology.
Who is it for?
• All RE prospects going into solid modeling CAD
• All RE prospects with prismatic & hybrid parts
Rapidform Products
World’s First Macro-free
Parametric Inspection from 3D Scan Data
Accuracy, Accuracy, Accuracy!
German PTB, American NIST and British NPL certified geometric calculation
engine embedded. Provable higher accuracy and repeatability than any other
3D scanning software. Real Scan-to-CAD geometry analysis without any
geometry approximation
Verify As-Built
Parts3D scan virtually any part, and generate color map deviation analysis in
minutes. Compare parts to CAD models or to other scans
Inspect Quickly with Guided Scanning & Auto Calc
Shop floor friendly with easy on-screen instructions for pre-planned inspection
routines. Generate complete inspection reports, including color maps and
GD&T, with one click
Perform Sophisticated GD&T Easily
Measure and tolerance parts with just a few clicks. Every measurement
becomes a repeatable routine, without any programming
Share Inspection Results & Collaborate On-line
Easily share results with colleagues with interactive 3D models in a web browse.
Publish PDF, PowerPoint, Excel and text reports, with interactive 3D images and
detailed reports
Use Data from 3D Scanners and Other Devices
Combine data from multiple sources, including CMMs, trackers and articulating
arms Scan and generate results in real time with liveInspect™ and liveScan™
Who is it for?
• Companies moving from CMM to scanning for metrology
• First article and next-to-line inspection
Rapidform Products
2nd Generation, non-parametric
/non-mechanical reverse engineering software
All automated
• Aligning unordered raw scan data
• Cleaning and perfecting defective scan data
• NURBS patch network conversion from mesh
• Cross section and Feature curves from mesh
Perfect solution for 2nd / 2.1 generation process
• Functional equivalent of 2nd generation RE Tools
• Quality mesh creation for milling, RP, or archiving
• Dumb NURBS model creation for milling, quick CAE, or simulations
• Cross sectioning for further modeling in CAD systems
Who is it for?
• RE prospects who don’t need a CAD solid
• RE prospects with artistic & organic parts that have no CAD design intent
Thank you !!!