Quiz 2 Sample
Q1 An involute pump casing is approximated as a toroidal shell as shown in the figure above. It
has an internal cross-sectional diameter of di = 200 mm, an overall external diameter of Do = 800
mm, and a wall thickness of 2.5 mm. Point A is located at mid-thickness of the wall. Determine
the maximum internal pressure P the shell can hold, such that the Tresca stress intensity at
point A does not exceed two-thirds of the yield strength σy = 200 MPa.
Q2 Determine the maximum load P the frame can support without causing the member AB to
buckle or yield. AB is pinned at ends for yy buckling and fixed at ends for xx buckling. The
yield stress sy = 210 MPa, and the modulus of elasticity Est = 200 GPa.
1