ENGTECH 3ML3 Assignment 1
Show all work with proper free body diagrams, proper units and use Engineering notation in your
solutions for full credit.
Q1. For the structure shown, all links have the same
cross-sectional dimensions, 20 mm by 6 mm and are
made of the same material which has a tensile yield
strength of Syt = 60 MPa. All pins are 5 mm in diameter
and made of a material which has a shear yield
strength of Sys = 35 MPa. There are two links EF on
either side of the vertical links connected to positions
E and F.
a) Determine the normal and bearing stresses in
the links DC and EF and the factors of safety
for these links.
b) Determine the factor of safety for the pins at
locations A, C and F.
Express your answers with 2 decimal places.
© D.E. Buryta
Q2. The force F3 is 500 N. Using cartesian vector methods, determine the equivalent force-moment
system at position O1 which lies in the centre of the pipe 100 mm from the origin along the y-axis. Clearly
draw and label the forces and moments on the cross-section with proper axes. © D.E. Buryta