Materials Science for ME
Course Objective...
Introduce fundamental concepts in Materials
Science
You will learn about:
• material structure
• how structure dictates properties
• how processing can change structure
This course will help you to:
• use materials properly
• realize new design opportunities with materials
Chapter 1 - 1
COURSE MATERIALS
Required text:
• Materials Science and Engineering: An Introduction
W.D. Callister, Jr., John Wiley and Sons, Inc.
Chapter 1 - 2
GRADING
Assignments
10 %
Quizzes
10 %
OHTs (one hour test)
30 %
Final Exam
50 %
Attendance in the class will be strictly observed starting first day of
classes.
Student will not allow to sit in the exam if he has %age less than 75.
Chapter 1 - 3
Chapter 1 - Introduction
•
•
•
•
What is materials science?
Why should we know about it?
What is materials engineering?
What is the difference between materials science
and materials engineering?
• Why should mechanical engineers study
materials science/engineering?
Chapter 1 - 4
Evolution of Engineering Materials
• The ages man has lived have been named
after the dominant materials being used
– Stone Age
– Bronze Age
– Iron Age
– Now?
• Silicon Age?
• Polymer Age?
• People in certain cultures were buried with
prized possessions that represented state
of the art technology of the time, e.g.
swords, shields, household items
Chapter 1 -
Evolution of Engineering Materials
• If such a culture existed today, people
would be buried with titanium wrist
watches, carbon fiber racquets, Si-based
electronic gadgets/mobiles
• The evolution of engineering materials
increased in pace during the past century
Chapter 1 -
Evolution of Engineering Materials
Chapter 1 -
Materials Science and
Engineering
• Materials Science
– Investigating relationships that exist between
the structure and properties of materials
• Materials Engineering
– On the basis of these structure-property
correlations, designing or engineering the
structure of a material to produce a predetermined set of properties
The four components of the discipline of materials science and engineering
and their interrelationship
Chapter 1 - 8
Example – Hip Implant
• With age or certain illnesses joints deteriorate.
Particularly those with large loads (such as hip).
Adapted from Fig. 22.25, Callister 7e.
Chapter 1 - 9
Example – Hip Implant
• Requirements
– mechanical
strength (many
cycles)
– good lubricity
– biocompatibility
Adapted from Fig. 22.24, Callister 7e.
Chapter 1 - 10
Example – Hip Implant
Adapted from Fig. 22.26, Callister 7e.
Chapter 1 - 11
Hip Implant
• Key problems to overcome
– fixation agent to hold
acetabular cup
– cup lubrication material
– femoral stem – fixing agent
(“glue”)
– must avoid any debris in cup
Ball
Acetabular
Cup and Liner
Femoral
Stem
Adapted from chapter-opening photograph,
Chapter 22, Callister 7e.
Chapter 1 - 12
Example – Develop New Types of
Polymers
• Commodity plastics – large volume ca. $0.50 / lb
Ex.
Polyethylene
Polypropylene
Polystyrene
etc.
•
Engineering Resins – small volume > $1.00 / lb
Ex.
Polycarbonate
Nylon
Polysulfone
etc.
Can polypropylene be “upgraded” to properties (and price) near
those of engineering resins?
Chapter 1 - 13
Structure, Processing, & Properties
• Properties depend on structure
ex: hardness vs structure of steel
(d)
Hardness (BHN)
600
500
400
(c)
(a)
(b)
4 mm
300
200
30 mm
30 mm
100
0.01 0.1
30 mm
Data obtained from Figs. 10.30(a)
and 10.32 with 4 wt% C composition,
and from Fig. 11.14 and associated
discussion, Callister 7e.
Micrographs adapted from (a) Fig.
10.19; (b) Fig. 9.30;(c) Fig. 10.33;
and (d) Fig. 10.21, Callister 7e.
1
10 100 1000
Cooling Rate (ºC/s)
• Processing can change structure
ex: structure vs cooling rate of steel
Chapter 1 - 14
Types of Materials
• Metals:
– Strong, ductile
– high thermal & electrical conductivity
– opaque, reflective.
• Polymers/plastics: Covalent bonding sharing of e’s
– Soft, ductile, low strength, low density
– thermal & electrical insulators
– Optically translucent or transparent.
• Ceramics: ionic bonding (refractory) – compounds of metallic
& non-metallic elements (oxides, carbides, nitrides, sulfides)
– Brittle, glassy, elastic
– non-conducting (insulators)
Chapter 1 - 15
Types of Materials
• Composites:
– Consist of more than one material type
– Designed to display a combination of the best characteristics
of constituent materials.
• Semiconductors: Soft, ductile, low strength, low density
– Electrical properties intermediate between electrical
conductors and insulators
– These materials have made possible the advent of ICs
• Biomaterials:
– Must be bio-compatible
– Must not produce toxic substances
– Must not cause adverse biological reactions.
– Brittle, glassy, elastic
– non-conducting (insulators)
Chapter 1 - 16
Types of Materials
Bar-chart of room temperature density values for various
metals, ceramics, polymers, and composite materials
Chapter 1 - 17
f08_01_pg8
Chapter 1 - 18
Chapter 1 - 19
f09_01_pg9
Chapter 1 - 20
p01_pg1
Chapter 1 - 21
p02_pg1
Chapter 1 - 22
p03_pg1
Chapter 1 - 23
Materials of the Future
Smart Materials
Smart (or intelligent) materials are a group of new and
state-of-the-art materials
now being developed that will have a significant influence
on many of our technologies.
The adjective “smart” implies that these materials are able
to sense changes
in their environments and then respond to these changes in
predetermined manners—
traits that are also found in living organisms
Chapter 1 - 24
Materials of the Future
Nano engineered Materials
With the advent of scanning probe microscopes (Section
4.10), which permit observation of individual atoms and
molecules, it has become possible to manipulate and move
atoms and molecules to form new structures and, thus, design
new materials that are built from simple atomic-level
constituents (i.e., “materials by design”).
This ability to carefully arrange atoms provides opportunities to
develop mechanical, electrical, magnetic, and other properties
that are not otherwise possible.
We call this the “bottom-up” approach, and the study of
the properties of these materials is termed nanotechnology”;
the “nano” prefix denotes that the dimensions of these
structural entities are on the order of a nanometer
(109 m)—as a rule, less than 100 nanometers
Chapter 1 - 25
The Materials Selection Process
1. Pick Application
Determine required Properties
Properties: mechanical, electrical, thermal,
magnetic, optical, deteriorative.
2. Properties
Identify candidate Material(s)
Material: structure, composition.
3. Material
Identify required Processing
Processing: changes structure and overall shape
ex: casting, sintering, vapor deposition, doping
forming, joining, annealing.
Chapter 1 - 26
ELECTRICAL
• Electrical Resistivity of Copper:
6
Adapted from Fig. 18.8, Callister 7e.
(Fig. 18.8 adapted from: J.O. Linde,
Ann Physik 5, 219 (1932); and
C.A. Wert and R.M. Thomson,
Physics of Solids, 2nd edition,
McGraw-Hill Company, New York,
1970.)
(10-8 Ohm-m)
Resistivity, r
5
4
3
2
1
0
-200
-100
0
T (°C)
• Adding “impurity” atoms to Cu increases resistivity.
• Deforming Cu increases resistivity.
Chapter 1 - 27
THERMAL
• Space Shuttle Tiles:
• Thermal Conductivity
of Copper:
--Silica fiber insulation
offers low heat conduction.
Thermal Conductivity
(W/m-K)
Adapted from chapteropening photograph,
Chapter 19, Callister 7e.
(Courtesy of Lockheed
Missiles and Space
Company, Inc.)
--It decreases when
you add zinc!
100 mm
Adapted from
Fig. 19.4W, Callister
6e. (Courtesy of
Lockheed Aerospace
Ceramics Systems,
Sunnyvale, CA)
(Note: "W" denotes fig.
is on CD-ROM.)
400
300
200
100
0
0
10
20 30 40
Composition (wt% Zinc)
Adapted from Fig. 19.4, Callister 7e.
(Fig. 19.4 is adapted from Metals Handbook:
Properties and Selection: Nonferrous alloys and
Pure Metals, Vol. 2, 9th ed., H. Baker,
(Managing Editor), American Society for Metals,
1979, p. 315.)
Chapter 1 - 28
MAGNETIC
• Magnetic Storage:
vs. Composition:
--Adding 3 atomic % Si
makes Fe a better
recording medium!
Magnetization
--Recording medium
is magnetized by
recording head.
• Magnetic Permeability
Fe+3%Si
Fe
Magnetic Field
Fig. 20.23, Callister 7e.
(Fig. 20.23 is from J.U. Lemke, MRS Bulletin,
Vol. XV, No. 3, p. 31, 1990.)
Adapted from C.R. Barrett, W.D. Nix, and
A.S. Tetelman, The Principles of
Engineering Materials, Fig. 1-7(a), p. 9,
1973. Electronically reproduced
by permission of Pearson Education, Inc.,
Upper Saddle River, New Jersey.
Chapter 1 - 29
OPTICAL
• Transmittance:
--Aluminum oxide may be transparent, translucent, or
opaque depending on the material structure.
single crystal
polycrystal:
low porosity
polycrystal:
high porosity
Adapted from Fig. 1.2,
Callister 7e.
(Specimen preparation,
P.A. Lessing; photo by S.
Tanner.)
Chapter 1 - 30
DETERIORATIVE
• Stress & Saltwater...
crack speed in salt water!
crack speed (m/s)
--causes cracks!
• Heat treatment: slows
10-8
10-10
Adapted from chapter-opening photograph,
Chapter 17, Callister 7e.
(from Marine Corrosion, Causes, and
Prevention, John Wiley and Sons, Inc., 1975.)
“as-is”
“held at
160ºC for 1 hr
before testing”
Alloy 7178 tested in
saturated aqueous NaCl
solution at 23ºC
increasing load
Adapted from Fig. 11.20(b), R.W. Hertzberg, "Deformation and
Fracture Mechanics of Engineering Materials" (4th ed.), p. 505, John
Wiley and Sons, 1996. (Original source: Markus O. Speidel, Brown
Boveri Co.)
--material:
4 mm
7150-T651 Al "alloy"
(Zn,Cu,Mg,Zr)
Adapted from Fig. 11.26,
Callister 7e. (Fig. 11.26 provided courtesy of G.H.
Narayanan and A.G. Miller, Boeing Commercial
Chapter 1 - 31
Airplane Company.)
SUMMARY
Course Goals:
• Use the right material for the job.
• Understand the relation between properties,
structure, and processing.
• Recognize new design opportunities offered
by materials selection.
Chapter 1 - 32