Chapter 1: Chemical Tools: Experimentation and Measurement
1.1 The scientific method
1.2- 1.6 Units of measurement
1.7 Density
1.8 Energy
1.9-1.10 Accuracy, Precision, and Significant Figures in Measurement
1.11 Unit Conversion
1.1The Scientific Method
Science has 5 Characteristics. It is Testable, Reproducible, Explanatory,
Predictive, Tentative.
1st - Observation –recording qualitative or quantitative data
2nd - Hypothesis – testable explanation of observed data
3rd - Experiment - tested through experimentation, results of experiments
must be reproducible. It must be controlled, meaning only one variable should
be changing at a time while the others remain constant.
4th - Scientific Law summarizes large amounts of scientific data and provide
descriptions of natural phenomena.
Ex: Law of gravity
Law of conservation of mass.
Some may be stated mathematically:
Ex: Boyle’s law: PV = k
- Scientific Theory is a set of tested hypotheses that explain natural
phenomena.
-the best current explanation
-always tentative, may change as observations of nature change
1.2-1.6 Scientific Notation
1. Please convert the following numbers to
scientific notation.
a) 0.0753
2. Convert the following numbers from
scientific notation back to
decimal/numerical form.
_____________
b) 400
_____________
c) 0.000675
_____________
a) 8.94 × 102
____________
b) 7.6 × 10−5
_____________
c) 2.4 × 10−3
_____________
d) 1.89 × 104
_____________
1.2-1.6 Units of Measurement
(SI units) Système Internationale d’Unités
Mass - Amount of matter in an object.
Weight - Measures the force with which
gravity pulls on an object.
Meter - The distance light travels in a
vacuum in 1/299,792,458 of a second.
All other units are derived from these fundamental units.
1.11 Dimensional Analysis and Unit Conversion
Dimensional Analysis: A method that uses a conversion factor to convert a quantity expressed in one unit to an
equivalent quantity in a different unit.
Conversion Factor: Expresses the relationship between two different units.
Please perform the following conversions and show how you obtained each answer.
1. 60.0 L = _____________mL
4. 1.3× 105 𝜇𝐿= ____________L
2. 98 cm = ____________ mm
5. 15 kW = ____________MW
3. 380,000 mg = _____________kg
Please perform the following conversions and show how you obtained each answer.
1. 2.3 cm3 = ____________mm3
2. 3.5 × 1025 𝑛𝑚2 =__________________m2
1.2-1.6 Temperature Scales
Kelvin ( K ) - The “absolute temperature scale” begins at absolute zero and has only positive
values. Note that the kelvin is not used with the degree sign (°).
Celsius ( oC ) - The Celsius scale is based on the freezing and boiling points of water. This is the
temperature scale used most commonly around the world. The Celsius and Kelvin scales use the
same size degree although their starting points differ.
Fahrenheit ( oF ) – The Fahrenheit scale is commonly used in the US. The Fahrenheit scale has a
different degree size and different zero points than both the Celsius and Kelvin scales.
T (in K) = T (in oC) + 273.15
T (in °F) = 1.8 T (in °C) + 32
Perform the following temperature conversions:
1.9 – 1.10 Uncertainty in Measurements
Accuracy –
Precision –
Systematic error –
Random error –
3. Mr. Anderson collects the following data points: 5.123 g, 5.119g, and 5.120g.
Ms. Calle performs the same experiment and collects the following date points: 4.250 g,
4.240 g, 2.050 g. The actual mass of the object was 4.245 g.
Which scientist measured the object more accurately? ________________
Which scientist was more precise? __________________
What kind of error might Mr. Anderson have encountered? _________________
What kind of error might Ms. Calle have encountered? ___________________
When measuring always estimate one more decimal place than what is marked on the measuring
device.
4. Measure the following line under the ruler as accurately as possible. The bottom of the
ruler shows centimeters (cm) with mm marks in between each cm.
This line is _______ cm
When reading a graduated cylinder/buret read the value at the bottom of the meniscus at eye
level.
1.9-1.10 Significant figures:
* The digits in a measurement that contribute meaning to accuracy and precision of that
measurement. Generally, the last digit in a reported measurement is uncertain (estimated).
*Counting numbers are called exact numbers and have infinite significant figures.
Rules for counting Sig. figs.:
1.
2.
3.
4
Determine the number of significant figures
Convert the following to 3 significant
in each of the following measurements:
figures:
1. 34.5 mL
________
1. 1.0135 m
___________
2. 0.00650 L
_________
2. 0.00340900 g
___________
3. 1.2 × 103 g
_________
3. 6.5 × 108 mm
___________
4. 10,000 m
_________
4. 10,000 mg
___________
5. 20300 m
_________
6. 0.0000034 kg
_________
7. 8.5030 × 10−2 km
_________
Calculating with Significant figures:
Adding and/or subtracting:
Multiplying and/or dividing:
Perform the following calculations to the correct number of significant figures and give the
correct units:
1) 0.546 g + 3.4 g =
2) 100.5 cm + 13 cm =
3) 4.0 m ÷ 2.546 s =
4) (5.435 × 102 mL + 100 mL) ÷ 3.42 mL =
5) 3 m × 2.0 m × 3.5 m =
1.7 Density
1. A sample of human fat weighs 302 g, what volume does it occupy
given that the density of human fat is 0.94 𝑔/𝑐𝑚3 ?
2. A sample of human muscle weighs 302 g, what volume does it occupy given that the
density of human muscle is 1.06 𝑔/𝑐𝑚3 ?
3. The concentration of carbon monoxide in an urban apartment is 34 µg/𝑚3 . What mass of
carbon monoxide in grams is present in a room measuring 11.0 𝑓𝑡 × 13.5 𝑓𝑡 × 16.5 𝑓𝑡 ?
(1 ft = 30.48 cm)
1.9 Energy in Chemistry
Energy is the ability to do work.
Potential Energy is energy due to the position of an object.
Kinetic Energy is energy due to the movement of an object.
Total Energy = Kinetic Energy + Potential Energy
Lower energy states are more stable and are favored over
higher energy states.
Energy is neither created nor destroyed.
– it is conserved
– and can be converted from one form to another.
Units:
Some Extra practice with conversions:
For the following question convert from one unit to another and please show your work. For the
questions in which the answer is provided to the right please show how to obtain this answer by
lining up the units.
a) 0.040 L =
__________ mL
b) 78 km = _____________ m
c) 50 kg = _____________ ng
d) 100 cm = __________ km
e) 2.5 × 103 g = ___________ kg
g) 6.734 × 103 cL = _________μL
f) 3.4 × 10−4 𝑚2 = ___________
𝑐𝑚2
ℎ) 1.58 × 10−2 kg = ___________ g