Established in
1975
Advanced
Level Telecom Training
Centre
GHAZIABAD
( Govt. of India Enterprise)
Online Training
Brochure
BHARAT SANCHAR NIGAM LIMITED, (A Government of India Enterprises)
O/o the Chief General Manager, Advanced Level Telecom Training Centre, Ghaziabad –201 002
Tel.:0120‐2755356/2702239, fax: 0120‐2756985, Website: http://www.alttc.bsnl.co.in
Registered & Corporate Office: Bharat Sanchar Bhavan, Harish Chandra Mathur Lane, Janpath, New Delhi‐110 001
From CGM’s Desk,
Technological
development globalization and
commoditization in telecom have brought inevitable:
tough competition in the telecom sector nationally
and internationally.
This in turn has spurred vendors and service
providers to have a serious re look and review the
whole gamut of management to devise strategies to
select technology, plan , desire, ROI for excelling in
competitive scenario.
Training plays a vital role in keeping the operation
competitive.
ALTTC has over three decades of experience in the
field of training in telecommunication.
The institute has been catering to the diverse needs of international as well as national tell
community.
Here we help you identify areas of concern in your organization where expertise of our
center can be leveraged for growth. We at ALTTC to strive to realize our vision, “Deliver
Excellence through Training”.
Arun Kumar Sharma
Training Facilities..
ALTTC has excellent facilities for
training. The lecture rooms at the
ALTTC are equipped with modern
teaching aids. Emphasis is given on
simulation of conditions existing in
the work environment. Hands‐on is
encouraged on live telecom systems.
ALTTC encompasses, training capabilities in
different streams i.e
1. Mobile technologies: GSM, CDMA, 3G, 4G LTE and LTE Advanced and Wi‐Max.
2. Modern Transmission Technologies: OFC, SDH, NG SDH, DWDM, GPON and
FTTH.
3. Satellite Communication: Antenna, VSAT, DTH, GPS and optimization of Power
(Link Calculation).
4. Next Generation Networks: working of Digital Exchanges, soft Switch and IMS.
5. IT & Networking: IPV4, IPV6, LAN, VLAN, Router Configuration, MPLS and
Broadband.
6. VLSI with VHDL, Embedded systems and Cyber security.
7. Electrical Eng.: Air Conditioning, Power system, Engine, Alternator, Energy
Conservation & Renewable Energy
8. Civil Eng.: Computer Aided Structural Design through STAAD Pro, Building
Maintenance & Precaution in Planning & Construction.
9. Law Courses
10. Finance courses
Page | 1
Excellence Center of ITU,Geneva
Sports & Leisure
ITU, Geneva have declared ALTTC as the “Center of
excellence” for Cyber Security ,IOT and Broadband
for 2019‐2022.
ALTTC is equipped with a variety of In‐door
and Out‐door sports activities‐
 Lawn Tennis
Table Tennis
 Badminton (In‐door
court) Basket‐Ball,
TV Room, Books
Hostel Complex
There are three well furnished hostels providing residential facilities to around 400
participants: (AC/Non AC rooms)
 J.C. Bose Hostel
 Bhabha Hostel
 Raman Hostel
Page | 2
Page | 3
Best Training Infrastructure…
Transmission
Labs‐ SDH &
DWDM
:
IMS NGN Labs
Mobile &
Satellite Labs
IT & Data
Network Labs
Page | 4
ClassroomTraining Detail: Industrial Training
Summer/Winter and Job Oriented Program:
Training Type
Industrial
Training
2-Weeks
Industrial
Training
4-Weeks
Training Hours
18 hours
36 hours
54 hours
120 hours
(6 hours per day * 3 (6 hours per day * 6 (6 hours per day * 9 days)
(6 hours per day * 20 days)
days)
days)
Methodology
Theory &
Practical
(3 days +
Weeks)
Training
Months
Batches will be start on every Monday in the months of:
In Summer: April, May, June, July, Aug
In Winter: October, November, December, January
Training
Timings
10:00 am to 5:00 pm in working days
Qualification
M.Tech/M.E./B.Tech/B.E./MCA/M.Sc./M.Phil./B.Sc./B.Sc. Eng./Diploma
Stream
1.
2.
3.
Electronics/ECE/ET/ENT
Instrumentation/E&I
Computer Science/CSE
Electronics/ECE/ET/ENT
Instrumentation/E&I
applicable
4.
5.
6.
Information Technology/IT
Electrical/EEE/EN
Civil Engineering
Computer Science/CSE Information
Technology/IT
Certificate
After 2 weeks
Industrial Training
6-Weeks
Job Oriented Program
4/8-Weeks
Theory & Practical
Theory & Practical +
+ Project Report Project Report Optional Theory & Practical + Job Aids +
Project Report Optional
1½ Optional
(9 days + 4½ Weeks)
(6 days + 3- Weeks)
(20 days + 4-Weeks optional)
After 4 weeks
After 6 Weeks
Batch may start any time as per the
requirement
of
Students,
Colleges/institute.
After 4/8 Weeks
(Project report in Optional)
Six weeks certificate of
Features
industrial training in
Two
weeks Four
weeks
respective field with
certificate
of certificate
of
specialization
of
industrial training in industrial training in
particular field of
respective field
respective field
Four/Eight weeks certificate of
industrial training with
Detailed certificate in respective
field + detail of specialization
student’s choice
Course Fee
Rs. 3540/- (3000/+ GST: 18%
Rs. 7080 (6000/+ GST: 18%)
Rs. 10620 (9000/+ GST: 18%)
Rs. 21240(18000/+ GST: 18%)
Batch Strength
15 to 30 students
15 to 30 students
15 to 30 students
5 to 20 students.
Note:- Weekend Training Program is also available on Saturdays.
Page | 5
Project Detail:
Summer/Winter
Page | 6
1. Mobile communication: Radio and cellular concept, Frequency,
bandwidth, channel, transmission problems and their solutions.
2. GSM system architecture: Description of all functional nodes of GSM system
like MSC, BSC, BTS, HLR, VLR, EIR, AUC etc.
3. Interconnections and interface: Connectivity details of various functional nodes
(Abis, Ater, A interface etc.)
4. Various identifier used in GSM system: IMSI, TMSI, MSISDN, MSRN, IMEI
their roles and structure.
5. CDMA: Concept and network architecture, Walsh code, PN code,
spreading concept etc.
6. Speech processing in GSM system: A/D conversion, Vo‐coding, Channel
coding, interleaving, burst formatting, ciphering etc.
7. Billing and customer care services: BCCS architecture, Order flow,
Intelligent network architecture and prepaid services, Value added services.
8. GSM data network concepts: GPRS and EDGE overview, WCDMA concepts and
3G Networks
9. Future trend in mobile communication: 4G‐LTE, LTE‐advanced, Overview of 5G.
10. Job Aids:
➢ Physical interconnection of various functional nodes of GSM (BTS, BSC, MSC etc.)
➢ Connectivity between BTS‐BSC, BSC‐MSC.
➢ GSM Data collection by drive test.
➢ Antenna and Antenna near product hardware interconnection (Jumper
cable, Feeder cable etc.)
Page | 7
1. Optical fiber: Brief description of optical fiber media, advantages and application of optical
fiber, principle, windows of operation, classification, losses and dispersion, ITU standardized
fibers.
2. Optical devices, sources and detectors: LED, LASER, PIN, Photo diode, avalanche photo diodes
etc.
3. Principle of PCM: Formation of digital tributary from analog speech signals. FDM, TDM, Frame
and Multi‐frames, signaling etc. PDH and SDH signals.
4. OFC Lab Visit: exposure of FDF, DDF and FMS, various types of optical cables, Pigtail, Patch
cord, connectors etc.
5. Optical cable design and features: Design of optical fiber cable, features of 12 and 24 fiber
cable. High count optical cable i.e. 144 and 288 fiber cables.
6. Optical fiber cable laying: Different types of laying procedures including Duct laying and latest
techniques used in laying e.g. HDD etc.
7. Optical fiber link engineering: Optical link power budget and design features of optical link.
8. Optical fiber measurements: Types of measurements taken on optical fiber, OTDR, light
source and power meter.
9. Splicing of optical fiber: Demo on splicing of single fiber and ribbon fiber cable, hands on
practice, demo on connectors, couplers etc.
10. Job aids on OFT (Optical fiber technology): Filling of 10 nos. of Job aids on OFT .
11. SDH: SDH basics, Multiplexing, Mapping and Pointer actions, different topologies used in
SDH.
12. NG‐SDH: Introduction to the next generation SDH, Ethernet basics, different protocols: VCAL,
GFP and LCAS.
13. SDH and NGSDH Lab: Demo on STM1/4/16, SDH and NGSDH equipment’s.
14. DWDM: Introduction, components, optical fiber amplifier‐EDFA etc.
15. FTTH, GPON/GEPON: Fiber to the Home Concept, Active and Passive optical network, GPON
and GEPON Technologies, OLT, ONT and splitters.
16. DWDM Lab: Demo on DWDM and GPON equipment’s.
Page | 8
1. Next Generation Network: NGN overview, migration towards IP networks,
EOIP/MOIP, Soft switch architecture (hardware/software), IP transport
network, NGN relative protocols overview (SIP/SIP‐T/SIGTRON/H.248/RTP
etc.), IMS network architecture, IMS services/IMS call flow
2. Satellite communication: Geostationary orbit, Geo synchronous orbit, Middle
earth orbit, Low earth orbit and different working networks in these orbits,
conversion of base band to RF (L‐band to RF).
3. Satellites Transponders: Different Transponders, Bent pipe/onboard
processing (OBP), Type of frequency bands (L, C, Ko and Ka bands),
Polarization, Uplink and Downlink concepts.
4. Satellite earth station: Different equipment’s, types of Antenna, LNA, LNBC,
VSAT/HUB, Very small Aperture Terminal topology.
5. Satellite Link design: Optimization of satellite power, concept of
carrier/bandwidth, carrier to Noise ratio C/N, C/No, Noise bandwidth, BER etc.
Concept of DTH, GPS, VSAT STAR/MESH/SCPC topology, CDMA, TDMA, FDMA.
Page | 9
1. Personality development
2. Leadership and Motivation
3. Stress Management
4. Interview skills
5. Fire Services, Energy Conservation and Renewable Energy
Includes 5 major projects, 20 practical’s using ATMEGA, 16 X 2 LCD, &
various Sensors.
Page | 10
1. VLSI Design: Introduction, Design flow, Concept of regularity, Modularity and
Locality.
2. Fabrication of MOSFETs: Process flow, CMOS n‐well Process, design rules.
3. MOS Transistor: Structure, MOS system under External bias, Structure and
operation of MOS Transistor. MOSFET scaling and small geometry effects.
MOSFET capacitors.
4. CMOS Invertor: Resistive load invertor, invertor with N‐Type MOSFET
load.
5. Semiconductor Memories: DRAM (Dynamic random access memory),
SRAM (Static random access memory), Non‐Volatile Memory, Flash Memory,
Ferroelectric random access memory (FRAM).
6. Familiarization of digital environment with DSCH
7. Practice of Combinational & Sequential logic with Editor/Simulator
8. Familiarization of ASIC & FPGA
9. Installation of XILINX ISE, Understanding of VHDL
10. VHDL Practice for Basic Logic Circuit (BLC).
11. Expansion of Combinational Circuit Design with VHDL.
12. Practice for VHDL of Combinational Logic. & Sequential Logic
13. Practice for VHDL of Combinational Logic via concurrent
statements/Using When/Else/Using/With/Select/When.
14. Understanding of Signal Vs Variables, Structural Model.
Page | 11
1. Telecom & IT Networks: Overview of Traditional Telecom Network, Current
scenario & Network Topology, Future Trends in Communication& Network (4D
Network), Design of LAN, WAN exposure in Networking LAB.
2. Networking devices, media and components: Introduction & working Principal
of various types of Network devices like switch, Modem, NIC, WAP, Media
Converter & Router. Media Overview like OF Cable, Unshielded Twisted Pair
(UTP) Cable, Shielded Twisted Pair (STP) Cable, Cable Installation Guides,
Wireless LANs, Unshielded Twisted Pair (UTP) Cable. (Job‐ Aid for Reference &
Practices)
3. IP Addressing: Over view of OSI Model, IPv4 Basic, IPv6 Addressing. (Job‐Aid
for Reference & Practices)
4. Router: Router configuration, Routing Protocols (Dynamic, static, OSPF, RIP).
Router Configuration Exposure in MPLS Broadband Lab. (Job‐ Aid for Reference
& Practices)
5. Concept of IP Allocation: Static IP Allocation, Dynamic IP Allocation, DHCP: On
Router & DHCP Server, DNS: On Router & DNS Server, Multiple DHCP. (Job‐ Aid
for Reference & Practices)
6. Understand and Implement VLAN concept: VLAN Assignment; Security
through VLAN; Inter VLAN routing.
7. Concept of WLAN: Overview of WLAN, Different types of IEEE 802.11 Standard,
IP Phone, NGN and its exposure in NGN Lab. (Job‐ Aid for Reference & Practices)
8. Utility of Server in A Network: Firewall, Proxy server, FTP Server & HTTP (Job‐
Aid for Reference & Practices).
9. Broadband Networks: FUP, BB Components, BB DSL Parameters, Network
Architecture, MNGT, Google Peering, Google Cache and security
implementation for Broadband.
10. Network design: Case study: CDR and ERP core structure (Examples).
11. Network Security: cryptography, stenography, and encryption.
Page | 12
1. Overview of Telecom Network & LAN Overview : Brief idea of Telecom
Network in India , LAN, MAN & WAN Structure of BSNL.
2. Network devices, Network media & Network Components: Various types
of Network devices like Router, Switch and practical demonstration of
devices with LAB visit, Network media like CAT 5/6 Cable, OFC, Various types
of Network Connector and Practical demon station with LAB Visit, IP Basics
and Job Aid 1, 2 & 3.
3. Brief idea of IP Basic: Allotment method of IP to Network and clients
,Routing protocol, Various types of Server & Uses.
4. Cyber Security Concept: Cyber Security concepts.
5. Network Protocols: Secured & Unsecured, TCP/IP, UDP,ARP, ICMP,
HTTP, HTTPS, SSH.
6. Layered Security and attack mitigation: Attacks in Different layer,
Security technologies, Link‐Layer Security, Penetration Test & Ethical
Hacking Techniques.
7. Security at Network Level: Network security & fundamental , ACL Control with
Practical demonstration .
8. Security at Application Level: SQL Injection, Cross‐Site Scripting,
Broken authentication and session management .
9. IT Act: IT Act 2000 & its amendments 2008.
10. Cryptography & Steganography : Symmetric & Asymmetric Encryption,
Block & Stream Cipher, Data Encryption Standard .
11. Public Key Infrastructure: Public Key infrastructure , Digital
f
f
h
d
Page | 13
Module‐8
1. Introduction of Web Technology: Application server, database server, FTP server,
intranet, internet, Topologies, OSI, TCP/IP.
2. Server: Configuration of Web server, Database server, FTP server, Local
Host, Network Design, Window configuration.
3. Language: HTML 5: Overview, Basic Tags, Elements, Attributes, Formatting,
Phrase Tags, Meta Tags, Comments, Images, Tables, List, Text links, Image links,
Email links, Frames, I‐frames, Blocks, Backgrounds, Color, Fonts, forms, Embed
Multimedia, Marquees, Header, Style sheet, HTML JavaScript, Layouts, Tag
reference, Attribute reference, Events reference, Fonts reference, ASCII Table
lookup, Color names, URL encoding, MIME Media types, Character encodings,
deprecated tags.
4. Language: CSS‐3: Overview, Syntax, Inclusion, Measurement units,
Colors, Background, Fonts, Text, Images, Links, Tables, Borders, Margins, Lists,
Paddings, Cursors, Outlines, Dimensions, Scrollbars, Visibility, Positioning,
Layers, Pseudo Classes, Pseudo elements, @rules, Filters, Media types, Paged
media, Aural Media, Printing, layouts, Validations.
Module‐9
1. Language: AJAX (Asynchronous java script and XML): Overview,
Technology, Examples, Browser support, AJAX in action, XML‐HTTP Request,
Database Operations, Security, Current issues.
2. J‐Query (web Application Library): Overview, Basics, Selectors, Attributes,
Dom Traversing, CSS Selector methods, DOM Manipulation, Events Handling, AJAX,
Effects.
Page | 14
3. Language: JavaScript: Overview, Syntax, Enabling, Placement, Variables,
Operators, If‐Else, Switch case, While Loop, For loop, For‐in loop, Loop control,
Functions, Events, Cookies, Page redirect, Dialogue Box.
4. JavaScript Objects: Objects, Number, Boolean, Strings, Arrays, date, Math,
RegExp, DOM.
5. JavaScript Advanced: Errors and Exceptions, Form Validation, Animation,
Multimedia, Debugging, Image Map, Browsers.
Module‐10
1. Learning PHP: Introduction, Environment Setup, Syntax Overview, Variable
Types , Constants, Operator Types, Decision Making, Loop types, Arrays,
Strings, Web Concepts, GET and POST Methods, File Inclusion, Files & I/O,
Functions, Cookies, Sessions, Sending Emails, File Uploading, Coding
Standard.
2. Advanced PHP: Predefined Variables, Regular Expression, Error and
Exception Handling, Bugs Debugging, Date and Time, PHP and MySQL, PHP
and XML, Object Oriented Programming, PHP and AJAX, function Reference,
Emailing and image processing..
3. Security: cryptography, encryption, decryption, hashing using PHP
4. MySQL Tutorial: Introduction, RDBMS Terminology, MySQL Database,
MySQL Connection using PHP Script, Create: Drop: Select database, Data
Types, Create Tables, Drop tables, Insert query, Select Query, Where
Clause, Update: Delete: Query, Like clause, Sorting Results, Regexps. ,
Transactions, Indexes, Alter Command, Handling Duplicates, MySQL SQL
Injection, Database Export/Import, MySQL Useful Functions.
Page | 15
1. Telecom infrastructure, Electrical installation Basics, Design Criteria, Factors
Affecting Air Conditioning Loads & Latest Trends ,Lighting Protection
2. Power system: Overview, Sub‐station‐Types selection and Designing, Earthing
3. Engine Alternator: Overview, Selection and Latest installation Practices etc.
4. Power sub station ,Water Pump motor set, Fire Detection system, Passenger Lifts
5. Energy Conservation & Renewable Energy sources
1. Planning, Estimation & Structural Design of Building
2. Tendering & Contract Management
3. Building Construction Practices, Quality Control & Material Testing
4. Green Building Construction Concepts
5. Telecom Towers – Foundation, Erection and Prefab Shelter Field Visit
Page | 16
Law Faculty, BSNL ALTTC is arranging online lecture series
•Recent settled Cases of CPSEs in Hon. Central Administrative Tribunal, High Courts
& Supreme Court.
•Focus on value addition of interns in drafting skills.
•Cyber Law – Indian & Global perspectives.
•Role of Telecom Dispute Settlement and Appellate Tribunal [TDSAT] in present
scenario. – Settled Cases before TDSAT.
•Role of Telecom Regulatory Authority of India [TRAI] in reference to regulation of
Telecom Operators & other policy matters.
•IT Act – 2000 & ITAA‐ 2008.
•Data Security Bill – 2018 – Challenges & Remedies.
•Labour Laws with necessary Compliance to the Act by Employer with Case Laws.
•Right to Information Act ‐ 2005 Act ‐ Section to section ‐ Analysis with Case Laws
& Landmark Judgment of Hon. Central Information Commission, Hon. High Courts &
Hon. Supreme Court.
•Conduct Rules of Central Public Sector Enterprises & Central Govt. institutions with
recent Case Study of disciplinary cases of employees of various CPSEs.
•Working of Vigilance Department in Central Public Sector Enterprises and Govt.
institutions with functioning of Central Vigilance Commission.
•Discussion on Settled landmark Cases of CPSEs in Hon. Central Administrative
Tribunal, Hon. High Courts & Hon.Supreme Court.
For more information Contact :
Sh. Manoj Singh, Assistant Director (Legal)
Mail ‐ Legal.alttc@gmail.com
Contact– 9354207320, 9412739350 (Whatsapp)
Page | 17
Who Can
Apply:
Candidate who have completed/Pursuing Diploma/Graduation in
Engineering in the disciplines of ECE/EEE/CS/IT/Civil and Electrical or
M Sc (Electronics/CS/IT)/MCA/MBA,BA‐LLB,B.Com‐LLB,BBA‐
LLB/CA/ICWA/CS
How to Apply:
 For registration of the course, please apply online from our
site: www.alttc.bsnl.co.in. After applying, Trainee may keep
in touch with Batch incharge for Online training Plateform.
List of Batch incharges with contact details will be displayed
in our Website under heading “Batch schedule”.
Page | 18
Online Vocational Training Fee:
Rs. 2,000/‐ plus 18% GST for 2 weeks Industrial Training (=2,360/‐
).
Rs. 4,000/‐ plus 18% GST for 4 weeks Industrial Training (=4,720/‐
)
Rs. 6,000/‐ plus 18% GST for 6 weeks Industrial Training (=7,080/‐
).
Course Fee is to be paid to the ( Current ) account of ‘ALTTC ‘SBI A/c No 10888625814, IFSC
Code: SBIN0000642 through e‐banking or NEFT/UPI.
.
Page | 19
Certificate:
ALTTC will award E‐certificates (Which can be verified by Unique id number
on it) to trainees after completion of the course.
Your batch in‐charge is committed to provide full support for your
certificate.
Note:
The BSNL ALTTC, Ghaziabad reserves the right to postpone the course schedule. In
such case the student opted will be better placed in the next batches.
BSNL/ALTTC will not provide any placement or Placement assistance.
Fee once paid will not be refunded.
Email: abhishekalttc@gmail.com, abhishek_gupta@bsnl.co.in
Website: http://www.alttc.bsnl.co.in
Mobile : 9412000938
Page | 20
Our Clients…
Page | 21