Aviation Radar System
Radar technology has become extremely important in today’s aviation world. Especially in
aviation, radar is used for air traffic control and navigation. Today, weather radars improve
aviation safety and increase the operational efficiency of the entire air transport industry.
Here is an in-depth insight into what radar technology is and what makes it so effective for many
applications.
What is Radar
Radar is an acronym for Radio Detecting And Ranging. It was initially developed and
introduced during the Second World War.
Radar may refer to electronic equipment that detects the presence of objects by using reflected
electromagnetic energy. Electromagnetic energy travels through air at a constant speed, at
approximately the speed of light, 300000 km/s. This constant speed allows the determination of
the distance between the reflecting objects and the radar site by measuring the running time of
the transmitted pulses.
Under certain conditions, a radar system can measure the direction, altitude, distance, course, and
speed of these objects.
The frequency of electromagnetic energy used for radar remains unaffected by darkness and also
enters fog and clouds. This allows radar systems to determine the position of aircraft, ships, or
other obstacles that are invisible to the naked eye due to distance, darkness, or weather.
Radar works on the same principle as an echo. In nature, an excellent example of this echo
principle is the bats’ ability to navigate with little sight capability by using the reflected echoes
of its cries to determine the location of obstacles.
Similarly, in its most basic form, the electromagnetic energy radiated by a radar system strikes a
reflective object (called a target) and is echoed back to a receiver.
Basic Radar System
Transmitter – The transmitter creates the radio wave to be sent and modulates it to form the
pulse train.
Antenna – The antenna takes the radar pulse from the transmitter and puts it into the air.
Receiver – The receivers amplify and demodulate the received RF-signals. The receiver
provides video signals on the output.
Duplexer – This is a switch that alternately connects the transmitter or receiver to the antenna.
Its purpose is to protect the receiver from the high power output of the transmitter. During the
transmission of an outgoing pulse, the duplexer will be aligned to the transmitter for the duration
of the pulse. After the pulse has been sent, the duplexer will align the antenna to the receiver.
When the next pulse is sent, the duplexer will shift back to the transmitter. A duplexer is not
required if the transmitted power is low.
Power Supply – The power supply provides the electrical power for all the components.
Indicator – The primary function of the indicator is to provide an easily understandable visual
display of the ranges and bearings of radar targets from which echoes are received.
Types of Radar System
There are two types of radar system – Primary and Secondary. Both rely on a burst, or pulse,
of radio energy that is intended to strike a target.
Radar, like all air transmission systems, uses radio waves. The frequency spectrum is wide and
has different characteristics in each of the frequency bands. Radar systems operate at and above
the L-Band range, i.e. above 1,000 MHz.
PRIMARY RADAR
Primary radar relies on reflections, or echoes, from the target being received back at the
transmitter. It then measures the time taken from the transmission of the pulse to its return. The
direction of the transmitted signal indicates the bearing of the target, while the measured time
difference gives the range, as the speed of radio waves is a known constant.
Primary radar uses the RF (radio frequency) pulse technique principle to determine the range and
bearing of a target. A transmitter transmits a beam of pulses, all objects in the path of the pulses
will reflect and scatter the energy. The reflected energy received back by the antenna (normally
part of the transmitting antenna) is processed and sent to a CRT.
Primary radar has many uses, In civil aircraft, primary radar has four uses:
1. To detect adverse weather conditions whilst airborne, i.e. Weather Radar.
2. At low power, to measure the distance of an aircraft above the terrain, ie a Radio
Altimeter.
3. At low power, also to measure the height of an aircraft above the terrain but using
Frequency Modulated Carrier Wave (FMCW), ie a Radio Altimeter.
4. Doppler navigation.
WEATHER RADAR
A weather radar system in aircraft is used to detect whether targets (clouds), which exhibit some
form of moisture. Areas with high moisture or rainfall rates are usually associated with
turbulence and so flight through these areas should be avoided if possible. This is possible by the
weather radar system.
A pulsed beam is sent out from the antenna and the clouds reflect some of the beams back. These
returning beams give a visual display on colored display as part of the EHSI. Colors indicate the
density of the cloud.
RADIO ALTIMETER
The radio altimeter (RA) system measures the vertical distance from the airplane to the ground.
The radio altitude shows in the flight compartment on the display units (DU). The radio altitude
is computed with the receiver-transmitter unit by comparing the transmitted signal to the
received signal.
The receiver-transmitter unit transmits a radio signal then receives the reflected RF signal back
from the ground to determine the altitude of the aircraft.
The flight crew and other airplane systems use the altitude data during low altitude flight,
approach, and landing. Usually, this system has a range of -12 to 2500 feet.
DOPPLER NAVIGATION
Doppler navigation is a self-contained aircraft navigation system. This type of navigation is
mostly used in rotary-wing aircraft. It was also initially used in fixed-wing aircraft for several
years before being replaced by global positioning system (GPS) navigation.
SECONDARY RADAR
Secondary radar works differently as it completely ignores any reflected pulses or echoes. In
general, secondary radar relies on the transmitted signal activating a transponder (on the target)
which replies to the signal by sending data back to the transmitter.
Primary radar systems operate on the principle of a passive echo from the target. Secondary radar
systems do not work on the echo principle, but use the reception of a radar pulse at the target
object, i.e. aircraft or ground station, to trigger a pulse response from a transmitter in the target.
Secondary radar can be used over a longer range than primary radar, and information about the
target object can be obtained from the triggered return pulse.
With secondary radar, the returned signal is used in two ways.
1. SSR – Secondary Surveillance Radar
2. DME – Distance Measurement Equipment
1. Secondary Surveillance Radar (SSR)
A series of pulses transmitted from a ground station is received and decoded by the aircraft. The
aircraft decodes these pulses and uses them to trigger a response from one of its onboard
systems, which transmits reply pulses on a different but adjacent frequency. The ground radar
receives the reply signal and determines the aircraft’s range and direction in a similar way to the
primary radar. In this case, the ground station is called a Secondary Surveillance Radar (SSR).
2. Distance Measurement Equipment (DME)
The distance measuring equipment (DME) system supplies slant range (line of sight) distance
measurement between the airplane and the ground station.
In the DME system the interrogating equipment, known as the ‘Interrogator’, is installed in the
aircraft and the target, located on the ground, is referred to as the ‘Transponder’ or ‘Ground
Beacon’.
DME has been standardized by the ICAO as a radio aid for short and medium distance
navigation. It is a secondary type of radar, which allows several aircraft to simultaneously
measure their distance from a ground beacon. The distance is determined by measuring the
propagation and delay of an RF pulse, which is emitted by the aircraft transmitter and returned at
a different frequency by the ground station after the reception.
Primary radar vs Secondary radar
The main differences between primary and secondary radar systems are:



Unlike primary radar, secondary radar requires the active cooperation of another system
(transponder).
Secondary radar information is exchanged in the form of a group of pulses and not by an
individual pulse.
Secondary radar requires a transmitter and a receiver – one on the ground and one in the
aircraft – unless it is an aircraft to aircraft system.