Login to MINI-LINK TN
Default IP Address
USB
control_user /
view_user
Password: Ericsson
Configure Basic NE
Right click>configure>Basic NE
As per TND NE Name, Location, Contact,
IP address, Subnet Mask and Default GW
Current date and Time
Configure OSPF Areas
onfigure>DCN>OSPF Areas
To View the Static R
Right Click>Configure>DCN>
Configure Radio Link (MMU)
Right click MMU2 D>configure>Configure Radio Link
Fill all the parameter as per TND
Upgrade the Baseline
Right click>Tools>Software Upgrade
Select PC>Browse>chose the baseline from list
Apply>Next
Once 100% done upgrade status the activ
Configure Traffic Routing
Right Click>Configure>Traffic Routing
Select Interface 1 and Interface 2 as per design slot
and send
To Save the TN report
Right click>Tools>Report>Save Repo
To Save the Load Configuration
Note: FTP server must be ON/Running
Select Upload to FTP Server and L
Right click>Configure>Load Configuration
View The Inventory and Release
Right click>Tools>Inventory
Ethernet Switch Configuration
Select Aging time and Switch m
Right Click Ethernet Switch>Configure>General
Configure RL-IME
Select RL-IME>Right click>Configure>select the pa
Configure WAN
Connect to Switch Port
Select WAN Interface>Right click>Configure>General
Configure LAN
Assign the switch port
Admin Status Up
Right Click on LAN>Configure>General
Configure VLAN
Right Click on Ethernet Switch>Configure>VLAN
Add the port member
Enter the VLAN ID as per Design and Name
To View The RSL
Right Click on MMU>Radio link alarm and status
To Perform the Loops
Go to Radio Links>Slot>Radio Link Loops