Download IBM C1000-063 exam dumps to help you pass your exam easily
Exam
:
C1000-063
Title
: IBM Tivoli Network Manager
V4.2 Implementation
https://www.passcert.com/C1000-063.html
1/6
Download IBM C1000-063 exam dumps to help you pass your exam easily
1.Which role is required in order to see the Network Health Dashboards pages?
A. ncp_networkhealth_dashboard
B. ncw_user
C. ncp_admin
D. ncp_dashboard
Answer: A
2.Which column name of the managedStatus table describes the date and time when the status of the
entity was modified?
A. changeDate
B. changeTime
C. changeStatus
D. modifiedTime
Answer: B
Explanation:
https://www.ibm.com/support/knowledgecenter/SSSHRK_4.2.0/tpdb/reference/tpdb_managedstat us.htm
3.Which command will verify that Apache Storm has database access?
A. $NCHOME/precision/scripts/ncp_storm_validate_dbAccess.sh db
B. $NCHOME/precision/scripts/ncp_storm_validate.sh db
C. $NCHOME/precision/scripts/perl/scripts/ncp_storm_validate.p1 db
D. $NCHOME/precision/scripts/sh/scripts/ncp_storrn_validate.sh db
Answer: A
4.DRAG DROP
What is the correct sequence of steps for the requirements-gathering phase?
Answer:
2/6
Download IBM C1000-063 exam dumps to help you pass your exam easily
5.A custom discovery stitcher creates a temporary table or array called customData using the Record
customData; statement. Since implementing the custom stitcher, the amount of available memory on the
ITNM server decreases more than normal while discovery is running.
What is a potential problem?
A. The customData table was not truncated before running the new discovery
B. The stitcher is missing the delete (customData); statement
C. The stitcher is missing the empty (customData); statement
D. The stitcher is missing the end statement on the last line of the stitcher so the stitcher never finishes
Answer: A
6.Given the Architecture and firewall placement in the diagram below:
3/6
Download IBM C1000-063 exam dumps to help you pass your exam easily
Which default port and protocol are being referenced as number 5?
A. 4100/tcp
B. 49220/tcp
C. 1883/tcp
D. 7968/tcp
Answer: B
7.What is the minimum password length based on the ObjectServer property PasswordFormat
16:2:1:0:1?
A. 16
B. 1
C. 2
D. 0
Answer: A
Explanation:
https://www.ibm.com/support/knowledgecenter/SSSHTQ_8.1.0/com.ibm.netcool_OMNIbus.doc_8.1.0/o
mnibus/wip/install/task/omn_con_sec_objectserverauthentication.html
8.In a firewalled master/slave ITNM architecture, what change is needed in
$NCHOME/etc/precision/ServiceData.cfg to allow the MIB browser through the firewall via TCP port
49220?
A. SERVICE: Config DOMAIN: domain ADDRESS:
remote IP PORT: 49220 SERVERNAME: remote host DYNAMIC: NO
B. SERVICE: Helper DOMAIN: domain ADDRESS:
4/6
Download IBM C1000-063 exam dumps to help you pass your exam easily
remote IP PORT: 49220 SERVERNAME: remote host DYNAMIC: NO
C. SERVICE: Disco DOMAIN: domain ADDRESS:
remote IP PORT: 49220 SERVERNAME: remote host DYNAMIC: NO
D. SERVICE: Mib DOMAIN: domain ADDRESS:
remote IP PORT: 49220 SERVERNAME: remote host DYNAMIC: NO
Answer: B
9.DRAG DROP
What is the correct order for configuring and starting ncp_ctrl to run processes remotely for the TARA
domain?
Answer:
Explanation:
To set up processes to be run remotely, complete the following steps.
Install Network Manager on both servers.
Configure Really Small Message Broker to allow communication between the master server and slave
server.
On the master server, configure the CtrlServices.DOMAIN.cfg file.
Back up and edit the CtrlServices.DOMAIN.cfg file.
For each process that you want to run on the remote server, set the hostName parameter to the host
name of the remote server. Make sure the host name is the name as defined on the remote server.
The following example configures the ncp_store process to run on the remote server called example.com
in domain TARA.
insert into services.inTray
(
5/6
Download IBM C1000-063 exam dumps to help you pass your exam easily
serviceName,
binaryName,
servicePath,
domainName,
hostName,
argList,
retryCount
)
values
(
"ncp_store",
"ncp_store",
"/opt/IBM/Tivoli/netcool/precision/platform/linux2x86/bin",
"TARA",
"example.com",
[ "-domain" , "<DOMAIN>" , "-latency" , "100000", "-debug", "0" ], 5
);
Start the ncp_ctrl process on the remote server in slave mode using the command line argument - slave.
The following example starts the ncp_ctrl process in slave mode in domain TARA. ncp_ctrl -domain TARA
-slave
Start the ncp_ctrl process on the local server in master mode using the normal command line options.
The following example starts the ncp_ctrl process in master mode domain TARA. ncp_ctrl -domain TARA
https://www.ibm.com/support/knowledgecenter/en/SSNFET_9.2.0/com.ibm.networkmanagerip.do
c_3.9/itnm/ip/wip/install/task/nmip_ins_settingupaslavencpctrlprocess.html
10.Which script assists in displaying event notifications such as the status of ITNM?
A. ITListener.pl
B. ITNM_ListenMsg.pl
C. ITNMlP_Notification.pl
D. ITNM_Scan.pl
Answer: B
11.What is the result of running the nco_ dbinit command?
A. Creates the NCIM Topology database
B. Creates the IBM Tivoli Change and Configuration Management database
C. Creates an ObjectServer database
D. Creates the Reporting Services database
Answer: C
Explanation:
https://www.ibm.com/support/knowledgecenter/SSSHTQ_8.1.0/com.ibm.netcool_OMNIbus.doc_8.1.0/o
mnibus/wip/install/task/omn_con_os_creatingobjserv.html
6/6