AS/NZS 4456.4/Amdt 1/2004-08-16
STANDARDS AUSTRALIA/STANDARDS NEW ZEALAND
Amendment No. 1
to
AS/NZS 4456.4:2003
Masonry units, segmental pavers and flags—Methods of test
Part 4: Determining compressive strength of masonry units
CORRECTION
The 2003 edition of AS/NZS 4456.4 is amended as follows; the amendment(s) should be inserted in the
appropriate place(s).
SUMMARY: This Amendment applies to Clauses 7(b) and 10(b) and the back cover.
Copyrighted material distributed by SAI Global and licensed to UNSW - LIBRARY. Accessed on 2020-09-18.
Reproduction,distribution,storage or use on a network is prohibited. Authorised User: Hamid Valipour (h.valipour@unsw.edu.au)
Published on 16 August 2004.
Approved for publication in New Zealand on behalf of the Standards Council of New Zealand on
21 May 2004.
AMDT
No. 1
AUG
2004
AMDT
No. 1
AUG
2004
AMDT
No. 1
AUG
2004
Page 3 Clause 7 (b)
Delete the first sentence in the second paragraph and replace with the following:
Where the specimen is to be tested through the face-shells, position it between two
pairs of strips of nominal 4 to 6 mm plywood, hardboard or 12 mm fibreboard.
Page 5 Clause 10(b)
Delete Item (b) and its contents and replace with the following:
(b)
Description of the marking, location and identification of the lot.
Back cover
Delete the interests noted on the back cover of the Standard and replace with the following:
The following interests are represented on committee BD-026:
Association of Consulting Engineers Australia
Association of Consulting Structural Engineers of NSW
Australian Building Codes Board
Australian Chamber of Commerce and Industry
Australian Institute of Building Surveyors
CSIRO Manufacturing and Infrastructure Technology
Calcium Silicate Brick Manufacturers
Clay Brick and Paver Institute
Clay Brick Manufacturers Association WA
Clay Brick and Paver Association of New South Wales
Concrete Masonry Association of Australia
Department of Infrastructure (Victoria)
Engineering and Construction Laboratories Association
Institution of Engineers Australia
ISBN 0 7337 6203 4
Institute of Municipal Engineering Australia NSW Division
Master Builders Australia
National Association of Testing Authorities Australia
New Zealand Concrete Masonry Association
Standards New Zealand
Stone Industry Association
Copyrighted material distributed by SAI Global and licensed to UNSW - LIBRARY. Accessed on 2020-09-18.
Reproduction,distribution,storage or use on a network is prohibited. Authorised User: Hamid Valipour (h.valipour@unsw.edu.au)
University of Newcastle
Copyrighted material distributed by SAI Global and licensed to UNSW - LIBRARY. Accessed on 2020-09-18.
Reproduction,distribution,storage or use on a network is prohibited. Authorised User: Hamid Valipour (h.valipour@unsw.edu.au)
This page has been left intentionally blank.