NOTES: C/ DD-950003 D M88 1. MANWAYS TO BE DESIGNED IN ACCORDANCE WITH THE ASME CODES. PLANT NO. C 2. BLIND FLANGES TO BE IN ACCORDANCE WITH ASME B16.5 UP TO 24" NPS AND ASME B16.47, 26" NPS & ABOVE. FLANGE INDEX DRAWING NUMBER 001 SHEET NO. 00 REV. NO. ONE HANDLE REQUIRED LOCATION OPTIONAL AS SHOWN FIT PIN AND HINGES SO THAT PIN IS LOOSE WHEN COVER IS BOLTED UP 4. MATERIALS AND FABRICATION SHALL BE IN ACCORDANCE WITH 32-SAMSS-004. BLIND FLANGE NO. 10 GA. WASHER & 6 DIA. COTTER PIN C 38 5 C 5 65 C 39 A TABS ON COVER HINGE TABS DETAIL OF HINGE C NO. 10 GA. WASHERS 38 38 38 150 45 3 C B C TABS ON FLANGE 38 FLANGE 20 DIA. B 39 3. ALL DIMENSIONS IN MILLIMETERS UNLESS NOTED OTHERWISE. FORMERLY STD. DWG. AD-036668; SHT. 001; REV. 07 COVER CONTINUOUS WELD AROUND NO. 10 GA. WASHER (NO COTTER PIN AT THIS END) REV. NO. DATE BY SAUDI CLASS 150 NOZZLE SIZE 20" CLASS 300 DESCRIPTION JO/EWO ARABIAN B C A B C 405 165 230 430 165 230 455 165 230 510 165 230 26" 480 165 305 530 215 305 28" 510 165 305 560 215 305 30" 545 215 305 595 215 305 32" 585 215 305 620 215 305 APPD. SCALE NONE DATE COMPLETED ENG. DEPT. OPRG. DEPT. APPD. FOR CONSTR. THIS DRAWING IS NOT TO BE USED FOR CONSTRUCTION OR FOR ORDERING 24" CERT. OIL COMPANY CHECKED BY DRAWN BY DATE STARTED A CHKD. MATERIAL UNTIL CERTIFIED AND DATED CERTIFIED BY DATE MANWAY COVER DETAILS FOR PRESSURE VESSELS & COLUMNS SAUDI ARABIA LIBRARY DRAWING PLANT NO. M88 INDEX DRAWING NUMBER SHEET NO. C/ DD-950003 D 001 REV. NO. 00 Saudi Aramco 2636 ENG. (3/91) CADD-02