CBT Passed
SAP NUMBER: 80012419
Contact Information:
Email ID: chameer15@gmail.com
Cell No: +966 55 965 9686
NAME
:
HAMZA ZAHOOR
NATIONALITY
:
PAKISTAN
POSITION
:
QC INSPECTOR [MECHANICAL]
ENGLISH
:
SPEAKING:YES/READING:YES/WRITING:YES
Application type#
:
NEW WITH SAP #
TOTAL YEARS OF EXPERIENCE IN
INSPECTION
:
7+
CSWIP 3.1 & ASNT NDT LEVE II
CERTIFIED IN (RT,UT,PT,DPT)
:
YES
CAPABILTY TO DO INSPECTIONS
:
YES
Professional Work Experience:
QA/QC inspector with 9+ years of inspection and engineering work experience & knowledge of quality
assurance/control activities including recommending and implementing the ITPs,checklist,SA 175
form,SAEP,SAMSS,SAES & IAP & providing accurate inspection and with the proper review of the
quality documentation.
Educational qualification:
Diploma in Mechanical Engineering, Government College of Technology, Faisalabad.
Post Graduate Qualification:
CSWIP 3.1.0 Welding inspector TWI UK(Certificate#343288,Candidate#714647)
Non Destructive Testing Certified Liquid Penetrant Testing ASNT -Level II. Certificate No: 2017-PT-001
Non Destructive Testing Certificate Course Magnetic Particle- ASNT Level II Certificate No: 2017-MT-001
Non Destructive Testing Certificate Course Ultra Sonic Testing- ASNT Level II Certificate No:2017-UT-004
Non Destructive Testing Certified Course Radiographic Testing ASNT Level II Certificate No: 2017-RT-003
CBT Qualified:
PID Welding & NDT
QM-03 General Mechanical
QM-04 NDT
QM-05 Linepipe
In-house [ATECO]Technical Trainings :




Pre-Fabrication Inspection
Production Requirements
Process inspection & test requirementection
Final Inspection



Line Pipe Mechanical Test
Coating thickness & suface roughness measurement method
Coating Repair methods
Technical Association / Memberships:
TWI UK Granta Park Membership CSWIP 3.1 Welding Inspector

Codes & Standards Mainly Used:












Saudi Aramco Inspection form 175
Saudi Aramco Schedule - Q Attachment III
SAES-W12
API 5L
SAMSS 035
ASME Section VIII
ASME Section IX
ASME SECTION V
ASME B31.3,B31.4,B31.8
API 598
API 577
ASME 16.5, 16.47
Experience Area:
•
•
•
Welding Inspection
Fit-up & dimensional inspections
PWHT & Hyrdrotest
•
Material Recieving as per MTC
Project Completed & Ongoing:
COMPANY
DURATION
POSITION
Sinopec
November 2021 - till now
Construction Representative
COMPANY
DURATION
POSITION
SEPCO 3
Oct 2020 - November 2021
Welding Engineer
COMPANY
DURATION
POSITION
ATECO
March2020 - Sep 2020
Vendor inspector
PREVIOUS EMPLOYER:
COMPANY
DURATION
POSITION
SEFEC ENGINEERING PVT LTD.
February 2018 – September 2019
INSPECTION ENGINEER
PREVIOUS EMPLOYER
DURATION
CONTRACTOR
POSITION
MAY 2016 – JANURAY 2018.
ITTEHAD INDUSTRIAL SOLUTIONS PVT LTD.
INSPECTION ENGINEER
DURATION
CONTRACTOR
POSITION
February 2015 – April 2016.
ENGINEERING KINETICS PVT LTD.
QA/QC ENGINEER
DURATION
CONTRACTOR
POSITION
JANUARY 2014 – February 2015.
DESCON ENGINEERING PVT LTD.
INSPECTION ENGINEER
Responsibilities & Duties
Mechanical Vendor Inspector Responsibilities:













Review & evaluate Contractor’s Quality Document submittals
Visual, dimensional inspection, material traceability checks and witnessing of material (Plates,
pipes, flanges, tubes,Fittings and structural items) as per approved drawings, final
performance test, pneumatic test, hydro test at manufacturer facility as per client standard.
Prepare inspection report of inspected items
Inspection of material durning manufacturing and before final inspection as per the level of
inspection.
Conduct Pre-Inspection Meeting (PIM) as per client agenda to discuss, assure & finalize
client’s PO requirements, specification and standards. Review, evaluate and approve
Inspection & Test plan (ITP) as per Saudi Aramco standard inspection requirements.
Perform “Hold”, “Witness” &” Surveillance” inspection & tests per approved ITP at
manufacturing facilities to ensure the compliance with Saudi Aramco requirements and
project specification.
Inspect material or equipment as applicable to ensure compliance with standard
requirements and proper handling, storage & protection at Saudi Aramco facilities or
construction site.
Monitor contractor’s Quality system, record & Quality Personnel for compliance with
requirements.
Review of welding procedure specifications and welding operator's qualifications.
Witnessing of any and all required tests to ensure strict compliance to approved drawings,
procedures and specifications.
Final inspections prior to dispatch which may include cleaning, coating, packing and marking
of equipment, review of vendor final documentation dossier.
Guide/suggest the Vendor in quality planning and implementation.
Interface with Contractors QA Managers, Suppliers/vendor, Aramco Vendor Inspection
representatives and PMT Project Engineers.

Perform welding inspection including review of approved welding documents (WPS, PQR,
WQTR, Weld Map), drawing approvals, material test certificates as per bill of material,
applicable ASTM/ASME standards, visual marking and traceability, weld joint fit up inspection,
visual welding inspection, dimensional inspection per drawing applicable tolerance sheets.

Review the entire Material Test Certificate and Documents as per Quality Plan, P.O. &
Specification and given Dispatch Clearance for finished Product.

Witness of hydro test of Valves performed at Vendor shop.

Responsible for verifying calibration records for testing and inspection equipment’s.
Responsibilites as QA/QC Welding/Piping Inspector
•
Inspection of welding equipment, cable connections, ear thing clamp, required
consumable treatment, portable oven functioning, welder ID, preheat, check
welding parameters, inter-pass temp, welding techniques used by welder, interpass cleaning, etc.
•
Review & monitor the WPS's, PQR's, Post-Weld Heat treatment, inspection & NDT
procedures, method of statements and work procedures, inspection & test plan
(ITP) versus the specifications, Codes, P&I drawings.
•
Review & monitor the QA/QC Documentation of the subcontractors and ensure that
all the activities are incorporated to their system on daily basis and can be traced
according to our requirements, and also reviewing radiographic films.
•
Reviewing the approved quality plans, manuals and scope of work to perform
the required inspection, review of NDT Matrix to check proper coverage of NDT
and PWHT for various piping classes.
•
Supervise non - conformance reports, verifying conformity of the work to specified
Quality Requirement and ensuring that the inspection and control are carried out
and documented in accordance with the requirement.
•
Perform pipeline checkup, ensuring that all installed pipe/fittings are to the
correct specification and that the material is in accordance with the specified
material traceability requirements.
•
Monitor and supervision of field construction activities to ensure design
requirements are met in compliance with drawings, specifications and applicable
codes. Ensuring adequate inspections are carried out by Fabricators QC department.
•
NCR follow up & issue new NCR if job not as per speciation, ITP, Standards.
•
Daily RFI’s & solving problems.
•
Ensuring welding consumables and materials are used for the work are in
compliance with the specified requirements.
•
Attend weekly meetings with the discipline engineers and construction people
to resolve any outstanding issues and take corrective action wherever required.
•
Preparation of inspection reports for different stages and keeping record
•
Final welding visual inspection, NDE if required.
•
Documentation
•
All the results of the inspections and tests are reported on a daily basis and the
reports are reviewed and approved to the applicable code and to the customer
specifications. Any deviations shall be documented and resolved.
•
Quality records shall be compiled in a test pack or called Quality Control Test Pack
and submitted for final approval along with as built-drawing.
• Experience in Co-ordination of site inspection activities.
•
NCR follow up & issue new NCR if job not as per speciation, ITP, Standards.
•
Daily RFI’s & solving problems.
•
Ensuring welding consumables and materials are used for the work are in
compliance with the specified requirements.
•
Ensuring that welding parameters are as per approved procedure and that
welding machines are calibrated.
•
Inspection of incoming materials – check dimensions, heat number, color code etc.
also inspection of spool fabrication – alignment, dimension check, joint geometry
as per WPS, material as per drawing, joint fit up etc.
•
Perform pipeline checkup, ensuring that all installed pipe/fittings are to the
correct specification and that the material is in accordance with the specified
material traceability requirements.
•
Training and qualifying welders in various processes. Maintaining records of all
welders and ensures their qualification continuity.
•
Inspection of incoming materials – check dimensions, heat number, color code etc.
also inspection of spool fabrication – alignment, dimension check, joint geometry
as per WPS, material as per drawing, joint fit up etc.
•
Inspection of welding equipment, cable connections, ear thing clamp, required
consumable treatment, portable oven functioning, welder ID, preheat, check
welding parameters, inter-pass temp, welding techniques used by welder, interpass cleaning, etc.
•
Review & monitor the WPS's, PQR's, Post-Weld Heat treatment, inspection & NDT
procedures, method of statements and work procedures, inspection & test plan
(ITP) versus the specifications, Codes, P&I drawings.
•
Review & monitor the QA/QC Documentation of the subcontractors and ensure that
all the activities are incorporated to their system on daily basis and can be traced
according to our requirements, and also reviewing radiographic films.
•
Reviewing the approved quality plans, manuals and scope of work to perform
the required inspection, review of NDT Matrix to check proper coverage of NDT
and PWHT for various piping classes.
•
Supervise non - conformance reports, verifying conformity of the work to specified
Quality Requirement and ensuring that the inspection and control are carried out
and documented in accordance with the requirement.
Personal Information
Name
Religion:
Martial Status:
Date of Birth:
IQAMA #
Passport No
:
:
:
:
:
:
Hamza Zahoor
Muslim (Islam)
Single
3rd of May 1997
2490279359
KW5121931
Date : 01st December, 2021
EMPLOYMENT CERTIFICATE
TO WHOMSOEVER IT MAY CONCERN
This is to certify that Mr. Hamza Zahoor has been employed as WELDING ENGINEER in our
Organization at PP14 Combined Cycle Power Station Project,Saudi Electricity Company,Riyadh.
During his tenure of 13 Months dated 01 OCTOBER, 2020 to
30 NOVEMBER, 2021, he was found
excellent in his assigned tasks and his role as WELDING ENGINEER was vital and greatly helpful in
executing the project.
This certificate is being issued for whatever legal purposes it may serve him best.
We wish him all success in his future endeavors.
Men Jun
Project Manager
PP14 PROJECT of Saudi Arabia
SEPCOIII Electric Power Construction Co., Ltd. Branch
SEPCOIII office, Riyadh to Al-kharj Road, After 3KM Police Check Point, Riyadh PP14 Power Station Project, KSA.
Head office-P.O. Box 47310 RIYADH 11552, KSA Website: http://www.sepco3.com/english.asp
Inl
I
IIESCOI[ EHGIITEBRIIYG (Prirntcl LI[ilfTED
Akhavan Hos*,
38 - Sk Agha Xhan lll Roq*
P.O. 8ox 1201, Lahor+54000
&ffi'ffi#F;?#
tTTJ
Phore: +92 (0{2} 536 6134
Fayc +* {A.e} 636 ,t04S. B3S 6S5,
E4talt: O€SCOill e ftrAC. !HE. tlrRifi.PK.
Tci*x: 44326 OSCON Pf.
trakisbn
Date:3 l{arch 2015
E}LPSRI ENCE gERTIFICATE
Thi: i: rertilied
thot i8r. Harnza
5lo
-
Ealoor Ahfngd worhed in our orgonizstion
Ses{on
Engin€ering o: on laspectian Engineer from dste ,sn ZCH to present at Feb 2Ol5 t6oo MW
Kot Addu Po{$erPM.
He irros very horduot{ting emplqpee.lle rffsJ $neexe u*th oll his
o:rigned to him.l,lJe uridr him oll the very best for future"
Proied Monoger
SiSt't ttctrnp
I
dutis ond respsrnbilitis
Sht lf,F€{$I0ll.*
Wa hersby d*dare that ililr
Organ&rtion aE a
**fiffi
mmpleted them to 0E
bnm
@fhntdurlrg
his stsy,
til*nl|dr
r/s
eXlP'$ffi
*5furt*.drffinc.m
trr
\;lS
ffimilH$1l$IHffi$0ffinilil$
IIINffffiIffiNSIffi
E-Mail : ittehadjis@yahoo.com
TO WHOM TTMAYCONCEBN
certify that Mr. Hamza Zahoor 3/O Zahoor Ahmad having CN|C rrro.sg1o36zm193-g
worked with us from 1* May lO16 to 3S Jan 2018, as Inspection Engineer in the inspection
This is to
department.
Rashid Hussain
Manager |1Rt FlUMAfit
Ittehad Solutions{ Pvt} LTD.
'**tr$!ti'"
i I qt-q'-$silg
$,ru$rHfrH a r{r
ffifi Hifle& ffi$$'ffi$$ffiiFt
CIffice: 481-4, Revenue Ernployeea ffe-operative N-lousing $ociety Johar Tawn Lahore
Ph; 042-35211S96" Ph I Fax: 042-352118S2.
IIB.
smtrEC EN#INEERXNC (PVY) LT'ffi,
HrAS OFfrcg:
Fax'.
C*31r?, Sqrrft ParkA\rsnue, Fha*e*il (Extenslon) g-f.i.A-, !tu'8clri-7&E0g, pa|4ista$.
, SSOSSOB trhofte$: *92-?1-5881 861.63, 58@gtg, SSOOB89
**2-7'{**8$3*ffi
E*roait: efer@digi*ora.Eet.pk s*fac@nmil.com
FACTOBYT Pr$t*35, $e#or-?8, K+:ar6i lndu#i*t Eslete, Karachi-75180, paki*ban,
Fax: +92-2'l -$C,4.*24.2 Phpnee: *$.2*21-$C64S1i -S, 504$1 f5-7
lssu6 Dats:
'16
$sp 2OlS
CERTIFICATIOhJ OF trXPtrRIThJCtr
This is hereby certified that Mr. Harnea Zah*or SIO Zahoor Ahmad, has wor]<ed
with us from Feb 2018 to Sep 2013 as an Inspection Eagineer for our project at
{RK}IPP}
He performed his duties in the diligent and satisfactory manner and proved to be
a valueable emBl*yee for SEFEC Engineering.{pvt} Ltd.
We wish him good luck for his future endeevours,
Prqie,ct hlfar.raser
r*,e{,i
Companv Stamq