SCHOOL SHOP PVT. LTD, MADANAYAKAHALLI, BENGALURU , KARNATAKA
FACTORY ACCEPTANCE TEST CERTIFICATE
Subject
: Grease Filling Machine Single Head.
Supplier
: M/S Hainds Equipments. [Mumbai Vasai]
Customer
: M/S SCHOOL SHOP PVT LTD. [MAKALI PLANT]
Instalation Date : 11th ,12 th April 2023.
Purchase Order : SC-2298783
1
2
Mechanical Trial Report
Trial Capacity [Dry run]
Machine
Hopper
Capacity Of Hopper Jacketted
Type With Heater
Immulsion Heater
20 L
Nozzle Dia
8 mm (SS-316)
1Stirror Motor with Gearbox
1HP Motor
Rotaray Valve
50 mm valve 3 hole 18 mm dia
Cylinder 1
50/100 Make Air Max :10 Bar Model
No:B000360104-0322-6282.
25/50 Make:Janatics Max Pressure:10 Bar Model
No:A520250500
HYDENT 24 V DC Model No 013541082084503
Pneumatic
Items
Cylinder 2
Solenoid Valve
1000 Watts
3
Filling Accuarcy
+/-0.5 g
4
Weight Accuracy to be controlled with a provision
for sensor mechanism
Hydent Sensor povided by adjsuting the stroke .
5
Hopper Insulation Cover to be Provided
Pending
6
Power Details
4
Hopper Top Side Cover to be Provided
Motor with gearbox make:crompton: 1 HP x 1 nos
Solenoid Coil : 24 V DC X 1 No
Heater -1000 Watts
Temperature Controller:20 Watts
Total:1770 Watts
Total Load :1.77(KW)
Compressor:8CFM W.Pressure 6Kg/Cm2(1HP)
Corrected
5
Tool Kits to be supplied along with the machine
along with the Operator manual.
6
Filling Range
PRODUCTION TRAIL -1:
Dated: 11th and 12th April 2023.
1|Page
Allen Key 1 Sets,Wrench Spanner 10 mm,11
mm,12,13 mm.Screw driver 1 no,push pin
connector.
5 To 50 g
SCHOOL SHOP PVT. LTD, MADANAYAKAHALLI, BENGALURU , KARNATAKA
Liquid Filling Machine
No. Of Bottles
Speed of Line Achieved
Filling Liquid
Production Completed Still Now
: Final Production Trail Report
: 2800 nos
: 3 Bottles/Mins
: Grease
:900 Bottles
Warranty and Spare Parts :
1. Material of construction for all contact parts are SS316..
2. Any mechanical, Electrical and Electronics parts failure with in 12months of warranty shall
be replace FOC.
3. Machine support for any mechanical, electrical and other issues, Service engineer shall visit
the site without additional cost for support.
4. Magnetic Sensor Spare 1 no need to give us.-not given
Pending Points:
1.
Weight Adjustment to be Controlled(+/-0.5g).during trail we discussed should
maintain.
Weight adjustment not controlled ,each and every bottle 3 to 5 g its not accepted ,so need
to do stirrer van modification need to do from your side again you need to come and
installation and see the performance of machine.
2.Heater Insulation Not Provided.
3.tools to be provided.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Authorized Signatory
School shop Pvt Ltd.
2|Page
Authorized Signatory
Hainds Equipments Mumbai.