Oss commands:
1. To see the TG of particular cell:
rxtcp:moty=rxotg,cell=(cell name);
2. To see the cf with faults:
rxmfp:mo=rxocf-(tgno.);
3. To see the tg:
rxcdp:mo=rxotg-(tgno.);
4. To see the all true status:
rxmfp:mo=rxotrx-(tgno.)-(trutei);
5. To see the cf:
rxmsp:mo=rxocf-(tgno);
6. To see all the devices:
rxapp:mo=rxotg-(tgno);
7. To see alarm:
rxasp:mo=rxocf-(tgno.);
8. To see all cf of BSC:
rlcrp:cell=all;
9. To see all data of Cell:
rlcrp:cell=(cellname);
10. To see the the software version and cabinet type,BTS-tie value
rxmop:mo=rxocf-(tgno);
11. To see external alarm for level 1:
allip:acl=a1;
for level 2
allip:acl=a2;
12. To BLOCK the CF
rxbli:mo=rxocf-(tgno),subord,force;
the trx - rxbli:mo=rxotrx-(tgno)-(trutei),subord, force;
the tx - rxbli:mo=rxotx-(tgno)-truei),force;
the tf - rxbli:mo=rxotf-(tgno),force;
13. To Deblock the CF
rxble:mo=rxocf-(tgno),subord;
the trx - rxble:mo=rxotrx-(tgno)-(trutei)subord;
the tx - rxble:mo=rxotx-(tgno)-(trutei);
the tf - rxble:mo=rxotf-(tgno);
14. To get the Dip name
rxapp:mo=rxotg-(tgno);radep:dev=(device of cf);ntcop:snt=(etmno);
15. To see the Dip:
dtstp:dip=(dipname);
16. To see quality of dip:
dtqup:dip=(dipname);
17. To reset the dip:
dtqsr:dip=(dipname),sf,degr,unacc;
18. To see all halted cell in BSC:
rlcrp:cell=all,state=halt;
19. To out of service cf
rxese:mo=rxocf-(tgno),subord;
Trx - rxese:mo=rxotrx-(tgno)-(trutei),subord;
Tx - rxese:mo=rxotx-(tgno)-(trutei);
Tf - rxese:mo=rxotf-(tgno);
20. To in service cf
rxesi:mo=rxocf-(tgno),subord;
Trx - rxesi:mo=rxotrx-(tgno)-(trutei),subord;
Tx - rxesi:mo=rxotx-(tgno)-(trutei);
Tf - rxesi:mo=rxotf-(tgno);
21. Some Tip
1. Firstly block the______
2. Then out of service the___________
3 Then in service the____________
4. And then de block the___________
22. To check the channel:
rxbdp:cell=(cellname);rxbdc:cell=(cellnm),