INCIDENT
3
SAFETY
6
SAFETY
HAZARDS
OSH PROGRAM
DEPARTMENT ORDER
NO. 13
LOTO
(LOCK OUT – TAG OUT)
MEDICAL SURVEILLANCE
SAFETY
HEALTH/COMMITTEE
SCAFFOLDING
40
1. INCIDENT is an undesired event under slightly different circumstances that could
have resulted in harm to people, damage to property, or loss to process.
2. SAFETY HAZARDS are unsafe practices or conditions that if not controlled may
result into occurrence of an accident or an incident.
3. SAFETY is the control of recognized hazards to attain an acceptable level of risk.
4. DEPARTMENT ORDER NO. 13 contains guidelines governing occupational safety
and health in the construction industry.
5. The number of hours of training as required by DOLE-BWC for safety is 40 hours.
6. SAFETY HEALTH/COMMITTEE is an organized group established for the purpose
of planning and policy making on all matters pertaining to safety and health in a
construction.
7. We must limit timber or bamboo scaffold to 6 meters.
8. When using ladder, we must always consider the 3 point contact.
9. LOTO (LOCK OUT – TAG OUT) is the best method in controlling hazardous
energies to avoid accident or incident.
10. OSH PROGRAM is a plan or outline of routine activities to promote safety
consciousness among management and workers in order that accidents and/or
illness can be eliminated or minimized to the lowest reducible level.
11. What rule in the OSH Standard refers to Construction Safety?
a) Rule 1410
b) Rule 1200
c) Rule 1130
d) Rule 1040
12. The Implementing Rules and Regulations of Republic Act No. 11058 is DOLE
Dept. Order No.?
a) D.O. 100
b) D.O. 198
c) D.O. 888
d) D.O. 300
13. Shall mean the vertical member of scaffold transmitting the load to the ground
or ro a base plate.
a) Putlogs
b) Base Plate
c) Standard
d) Street
14. The walls of every excavation over _______ meter deep shall be supported by
adequate shoring and timbering to prevent collapse.
a) 1 meter
b) 2 meters
c) 3 meters
d) 4 meters
15. Tools and materials shall be kept a minimum of _________ away from the edge
of the excavation to prevent from being knocked down into the excavation.
a) 5 meters
b) 4 meters
c) 2.5 meters
d) 1 meter
16. The basic elements of OSH program in high risk establishment includes the
following, except….
a) Toolbox/Safety Meetings/JSA
b) Transportation or Off the job safety
c) Company commitment to comply with OSH program
d) Accident investigation plan
e) Prevention and control of HIV/AIDS, TB
17. Industrial hygiene is best defined as:
a) that science and art devoted to anticipation, recognition, evaluation, and
control of those environmental factors or stresses arising in or from the
workplace, which may cause sickness, impaired health and well-being, or
significant discomfort among workers or among the community.
20. The contents of SDS or safety date sheets includes:
a) Firefighting measures, identification of chemicals.
b) First aid measures, hazards identification
c) All of the above.
21. R.A. 11058 entitled "An Act Strengthening Compliance with Occupational Safety
and Health Standards and Providing Penalties for Violations thereof"
a) TRUE
b) FALSE
22. Lux is the unit of measure for sound level.
a) TRUE
b) FALSE
b) that science and art devoted to evaluation, anticipation, recognition, and
control of environmental factors or stresses arising in or from the
workplace, which may cause sickness, impaired health and well-being, or
significant discomfort among workers or among the community.
23. COVID19 is a deadly virus that could be transmitted to other people by sharing
utensils.
a) TRUE
b) FALSE
c) that science and art devoted to anticipation, control, recognition, and
evaluation of environmental factors and stresses arising in or from the
workplace, which may cause sickness, impaired health and well-being, or
significant discomfort among workers or among the community.
24. Under Department Order No. 53-03, S.2013 (Drug Free Workplace), all
employees are required to undergo drug testing every year.
a) TRUE
b) FALSE
18. The composition of Safety and Health Committee in order is as follows:
a) Chairman, Secretary, Members and First Aider
b) Chairman, Members, Secretary and First Aider
c) Chairman, Vice Chairman, Secretary, Members and First Aider
19. The Safety and Health Committee shall be chaired by:
a) The highest position in the company.
b) The Safety Officer
c) The Health Personnel
25. The action levels for TLV of noise is 80 dBA.
a) TRUE
b) FALSE
26. Electricity related accidents happen most frequently in high voltage areas.
a) TRUE
b) FALSE
27. Scaffold is a temporary structure used to hold materials and limited number of
workers in order to carry out at height.
a) TRUE
b) FALSE
28. Trench is a type of excavation or depression in the ground that is generally
deeper than it is wide and narrow compared to its length.
a) TRUE
b) FALSE
29. The type of medical surveillance that require medical history and physical
examination and blood levels of chemicals or their metabolites is called transfer
examinations.
a) TRUE
b) FALSE
30. Pipefitters, plumbers, welders, solderers has common hazards exposures.
a) TRUE
b) FALSE
31. “5S” means that there is a place for everything and everything in its place.
a) TRUE
b) FALSE
32. In the demolition planning, the key areas include the following, except:
a) Explosive proper handling
b) Types of structures
c) Location of Services
d) Hazardous substances
33. Frequency rate is defined as the determination of rate of disabling injuries
including total days charged of a company in a certain period of time.
a) TRUE
b) FALSE
34. In demolition activity, what is the first thing that should be done?
a) Secure permit
b) Hire qualified and competent people
c) Conduct pre-job planning
35. The most frequent part of the scaffold that is often neglected during erection
is….
a) Post
b) Ladder
c) Coupler
36. To overcome fear during conduct of training or speaking in front of the people is
to understand who the participants are.
a) TRUE
b) FALSE
37. In the IRR of the RA11058, Section 17 provision pertains to
a) Welfare facilities
b) OSH reportorial requirements
c) Workers right to know
38. The IRR of the RA11058, is the DOLE Department Order No. ________ ?
a) 197-12
b) 198-11
c) 198-18
39. In case of fatal accident in the workplace, we are required to report DOLE
within…
a) 12 hours
b) 2 days
c) 24 hours
40. During investigation of accident, our primary goal is?
a) To find who is to blame
b) To find the root cause or basic cause
c) To prevent similar accident to happen again in the future
41. An examination of the work environment, including the location and operation
of machinery other than those covered by technical safety audits, ventilation,
and other possible sources of safety and health hazards is called…
a) Risk assessment
b) General Safety and Health Inspection
c) Job Hazard Analysis
d) Safety Inspection
42. Risk is the multiplier effect of presence of hazards and worker’s exposure to the
hazard.
a) TRUE
b) FALSE