MICRO RTU DATASHEET
SYNC 2101 Series
Overview
SYNC 2101 is a versatile communication product for smartgrid applications. This product is suited for running in rugged
environment with high security data exchange. Other main
feature is the integrated IO capability with ability to transfer field
IO to remote location over WAN (Static/Dynamic IP) using M2M
Gateway.
•
•
Features
General
• Upto 20 hardwired input signals for status indication
• 6 digital outputs for remote commands
• LED indications for digital inputs and outputs
• 4kV optical isolation for digital inputs and outputs
• I/O operation counter storage for asset maintenance
• Event notification over SMS for operator assistance
• Power outage notification*
• Enabled with smart-grid protocols IEC60870-101/104,
DNP3.0, Modbus, DLMS-COSEM and IEC61850
• Basic logic engine and advanced logic engine based on
IEC61131-3
• Automatic startup with restart notification following power
restoration
• Time synchronization using NTP/SNTP/NMEA/IEEE1588*/
IEC60870/DNP3
• Device management using SNMP/Web HMI
• Remote configuration & software update over the air
• Local/remote switch for safer maintenance operation
• Supports up-to 500 data point with 1millisecond time
resolution
• Persistent event storage
• Multi master communication capability
• Transparent/tunneling support for remote configuration
• Inbuilt Web HMI for monitoring and control
Add-on Features
• 4 analog input module (4-20mA)
• 12 digital input add-on card
• Internal or external pluggable cellular modem (GPRS/EDGE/
CDMA/EVDO/UMTS/HSDPA)
• Low power 2.4 GHz RF modem for last mile communication
• External Radio/PSTN modem can be used
Applications
Distributed
Automation
• FPI automation
• DT monitoring
• Capacitor bank
Feeder
Automation
• Auto-reclosure
• Sectionalizer
Asset Monitoring
• Power
transformer
• Distributed
generation
Related Products
•
•
•
SYNC 4011: Control Center Gateway
SYNC 4021: M2M Gateway
SYNC 2111/2121: Feeder RTU
Models
Security
•
•
SSL based VPN with AES, DES or 3DES encryption over WAN/LAN
Compliant to NERC-CIP security standards
•
•
IEC62351-3 transport layer security
IEC62351-5/DNP3 secure authentication
SYNC 2101 -M1 : 8 DI, 6 D0, 4 AI
SYNC 2101 -M2 : 20 DI, 6 D0, 4 AI
Capacitor
Banksby ISP
Public Network
Provided
GPRS/CDMA
Network
Capacitor Banks
Router
Distribution Network
SYNC 3000
Control Room
DT Monitoring
Equipments
SCADA / HMI
Ring Main Units
Sectionalizers
Applied Systems Engineering, Inc.
a kalkitech company
sales@ase-systems.com
www.ase-systems.com
© 2015 Applied Systems Engineering - A Kalkitech Company
Micro RTU SPECIFICATION SHEET
General
EasyConnect configuration utility/SNMP and SSH interface over secure network.
FOTA support over GPRS/EDGE/CDMA/EVDO/UMTS/HSDPA
Management
Inbuilt Web HMI for monitoring and control
Direct over debug port or console port
TCP/IP, UDP/IP, SMTP, POP, HTTP, FTP, SNMP, ICMP, DHCP, BOOTP, Telnet, DNS,ARP, PPPoE, DDNS
IEC 60870-5-101/104, DNP3 serial/TCP, Modbus RTU.TCP, DLMS, IEC61850 and many more
LAN ready, data transfer, serial port RX/TX status, power, IO point status
NERC/CIP compliant, SSHv2
SSL based VPN tunnel using Blowfish/AES/3DES
IEC62351-3, IEC62351-5
Basic logic engine with AND/OR/NOT/Bit SHIFT/Split/Index support for digital and analog data delay operations.
Advanced logic based on IEC61131-3
Maintenance
System Protocols
Application Protocol
LED Indications
Security
Logic Programming
Serial
DB9 - 2 connectors
Combicon terminal block - 1 connector
110 bps - 38.4 kbps
Ports
Data Rate
Ethernet
Ports
Physical Layer
Isolation
I/O Interfaces
1 RJ45
10/100 Base-T auto sensing
1500VAC min as per IEEE802.3/ANSI X3.263
8DI 24/48VDC
6DO 2.5-5A, 24/48VDC
4AI card, 4-20mA
12DI card, 24/48VDC
4kV optical
4kV optical
Default Option
Add-on Option
Digital Input Isolation
Digital Output Isolation
Power Requirements
Main Card
Internal Modem
Option 1: PS-ACDC
85-266VAC (50/60Hz), 120-370VDC
Option 2: PS-DC1
19-70VDC
Option 3: PS-DC2
9-34VDC
4Watt
4Watt
8DI, 6DO
4AI (Option)
12DI (Option)
2Watt
2Watt
1Watt
Power Supply
Consumption
Details
1 RS232, 1 RS232/485
1 RS485
Plug-in Modem
Internal
External
Physical
Dimensions (H x W x D)
Mounting
Weight
Default Enclosure
Optional Enclosure
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
GPRS/EDGE/CDMA/EVDO/UMTS/HSDPA
Radio modem, PSTN modem
140mm x 240mm x 60mm
Wall/din rail
800 grams
IP20
IP55
-10°C to 70°C (14°F to 158°F)
-20°C to 80°C (-4°F to 176°F)
5% - 95% RH non condensing
* Need to order separately
Please contact us for pricing details.
Applied Systems Engineering, Inc.
a kalkitech company
1671 Dell Avenue, Suite 200, Campbell, CA 95008-6900
<<<
ASE Version 4.02.052015
phone: (408) 364-0500
fax: (408) 364-0550
Product descriptions and features in this document subject to change without notice
sales@ase-systems.com
www.ase-systems.com
© 2015 Applied Systems Engineering - A Kalkitech Company