Autodesk WikiHelp
Add Imposed Motion
Next, you add an imposed motion to specify the required rotation of the cam.
1. In the browser, expand Standard Joints.
2. Right-click the revolution joint, and select Properties.
3. Click the dof 1 (R) tab.
4. Click Edit imposed motion.
5. Select Enable imposed motion.
6. In the Driving field, ensure that Velocity is selected.
7. Click the arrow next to the velocity input box, and then select Constant value.
8. Change the value to 360 deg/s.
9. Click OK.
Previous | Next
Add Imposed Motion
1