TECHNICAL DATA SHEET
PRODUCT FAMILY
Se l f-Su p p o r t e d Ae r i a l Ca b l e
8 Fi g u r e ? M e s s e n g e r o f 3 /1 6 ?
FOSPC-XXX-X-F8SJAD-3/16
Messenger
MDPEExternal Coating
Water blocking tape
Reinforcement central member
Support Binders
Ripcord (2)
Water blocking thread
Loose tubes with gel
Optical fiber unit
Tecnichal Caracteristics
-
Incorporated galvanized steel messenger, composed by 7 steel wire threads with thickness of 1.6mm making a
messenger total diameter of 3/16?.
Self-supported cable for the aerial installation in just one step without lashing optimizing installation costs.
Allows configurations for vanes from 90 to 120m based on configuration.
High resistance loose tube produced with PBT (Polybutylene-tereftalato), guarantees protection to the fibers,
flexibility and rigidity to inappropriate curvatures.
Unique control method of the length variations and fiber excess ensuring the cable excellent mechanical and
environmental properties.
Unique extrusion technology that allows the fibers inside the loose tube great flexibility and flexion resistance.
Multiple waterproof protection methods as water blocking tapes and threads and gel in the fibers.
Generalities
Scope
This specification of its application serves to inform that all the design requirements and standard performance are covered
in order to provide fiber optic cable in the industry. It also includes the scope of cable designed with optical, mechanical
and geometrical characteristics determined for its application.
www.waveoptics.net
sales@waveoptics.net
(3 3 ) 3 8 9 8 2 7 5 0
Juan Alvaréz # 40
Col. Toluquilla
Tlaquepaque, Jalisco
C.P. 45610 Mexico
Cable Type
Applications
FOSPC-XXX-X-F8SJAD-3/16
External plant cable for self-supported aerial installation
Folio XX-XXX-XX-EN | Last Review 06-26-2019 | 1
TECHNICAL DATA SHEET
PRODUCT FAMILY
Description
WAVEOPTICS 8 Figure self-supported cable with totally dielectric core, ideal for aerial installation in just one step and
without lashing, saving time and money in a quick installation. In the cable core the high resistance loose tubes whith fiber
optics are braided. Therse are wrapped in a filling compound to avoid water penetration inside the easy-cleaning loose
tube. Located in the core center, the reinforcement central member and the braided tubes wrapped around the member in
S-Z for an easy access to the fibers, beein a compacted construction. High density polyethylene external coating, of high
resistance and durabillity, easy to remove. Steel incorporated messenger made by 7 wire threads of 1.6mm of thickness
offering an excellent resistance agains traction force and resistent to corrossion. At the same time, this cable provides
excellent transmission conditions along with its physycal performance.
Quality
The WAVEOPTICS fibers and optical cables are manufactured and tested according to international norms:
-
IEC 60793-1 part 1:Generic specifications for fiber optic
IEC 60793-2 part 2: Product specifications for fiber optic
IEC 60794-1-2: Test procedure for fiber optic cables
Telcordia GR-20: Generic requirements for fiber optic and cables.
Each WAVEOPTICS cable meets the highest quality standards in the indistry. Each WAVEOPTICS cable coil contains a
compliance certificate in which the performed tests in our quality laboratory are physically attached.
Each cable has the TL9000, ISO9000, ISO14001 certifications.
The quality control is reached through an intense quality revision inside of the company and the acceptance of the rigorous
audit by the ISO9001 norm.
Reliability
The WAVEOPTCS cable goes through some rigorous initial and periodical tests of qualification of its performance and
durability in order to ensure the reliability of the product.
www.waveoptics.net
sales@waveoptics.net
(3 3 ) 3 8 9 8 2 7 5 0
Juan Alvaréz # 40
Col. Toluquilla
Tlaquepaque, Jalisco
C.P. 45610 Mexico
Folio XX-XXX-XX-EN | Last Review 06-26-2019 | 2
TECHNICAL DATA SHEET
PRODUCT FAMILY
Dimensions and Properties
Fibers number
12
24
36
48
72
96
144
Loose tubes number / Filling
1/5
2/4
3/3
4/2
6/0
8/0
12/0
Number of fibers per loose tube
12
Loose tube diameter
2.1/PBT
FRP reinforcement central member
2.25mm
External coating material
Physical
2.6 (3.7)mm 2.8 (6.1)mm
HDPE/1.5MM
External cable diameter (OD) (1)
11.0*20.8
12.0*21.2
16.2*25.8
245
280
370
100m
90m
Cable Weight (kg/km) (2)
Typical coil length (3)
4 km
Operation temperature range
-30ºC a 70ºC
Installation temperature range
-10ºC a 70ºC
Storage and transport temperature range
-30ºC a 70ºC
Maximum tensile stress at the short term/ long
term
8000
120m
Maximum vane (4)
Mechanical
144
Flattening resisntace at the short term / long term
(N/100mm)
Minimum radius of dynamic/static
curvature-(5)
1000N/100m
20 x OD / 10 x OD
Notes: (1) The external diameter may vary by ± 0.5%(2) The weight may vary by ± 10%(3) The coil length may vary by ± 5%
(4) Under NESC Light conditions (5) OD-External diameter
Transmision perfomance by selected WAVEOPTICS fiber type
Fiber type
Categorry
WAVEOPTICS fiber code
Multimode
Singlemode
OM1
OM2
OM3
OM4
G652.D
G657.A2
B
C, L
D, M
O, P
F
E
Wavelength (nm)
850/1300
1310/1383/1550
Core diameter/modal field (µm) (1)
62.5
50
8.8~ 9.6//9.6~ 11.2
8.8~ 9.2//9.3~ 10.3
Maximum attenuation (dB/km) (2)
3.0/1.0
3.0/1.0
0.36/0.36/022
0.36/0.36/022
Mínimum bandwidth (MHz*km)(3)
200/600
700/500
1500/500
3500/500
N/A
N/A
Gigabit Ethernet link distance (m)
(4)
550/275
750/600
1000/600
1100/600
N/A
N/A
10-Gigabit Ethernet link distance
(m) (5)
-/-
150/-
300/-
550/-
N/A
N/A
MM62.5
MM50
MM50 10G150M
MM50 10G300M
SM
SM MBR7.5MM
Marked cable specification
Notes: (1) Core diameter value is presented in multimode fibers, modal field diameter value for each singlemode wavelength
(2) Maximun attenuation after extrusion process. (3) Bandwidth measurement OFL (overfilledlaunch or saturated injection)
(4) Transmissions 1GB/s at 850nm based in IEEE802.3z protocol (5) Transmissions 10GB/s at 850nm based in IEEE802.3ae protocol.
www.waveoptics.net
sales@waveoptics.net
(3 3 ) 3 8 9 8 2 7 5 0
Juan Alvaréz # 40
Col. Toluquilla
Tlaquepaque, Jalisco
C.P. 45610 Mexico
Folio XX-XXX-XX-EN | Last Review 06-26-2019 | 3
TECHNICAL DATA SHEET
PRODUCT FAMILY
Reel Dimensions
Fibers number
A (mm)
B (mm)
C (mm)
12
1450
1450
98
24
1450
1450
98
36
1650
1650
98
48
1650
1650
98
72
1650
1650
98
96
1650
1650
98
144
1850
1850
98
Note:
Standard Reel of 4,000 m (with a tolerance from 0% to 5%). Although it
can be provided in a different length being specified at the time of
purchase.
The ends of the cable are attached so that they do not extend beyond the
reel and to prevent the cable to loosening during transport. Caps are
incorporated to ensure sealing.
Elements of WAVEOPTICS cable reels
A The reel has a label with its handling instructions
B Optical tests report, applied by the WAVEOPTICS Quality
department.
C Product description (information about part number, content,
weight and dimensions is included).
D Cut label ( to identify the lengths in each reel and to have control
over the cuts lengths)
Packaging
E Reel identification number
F
Scaffold
www.waveoptics.net
sales@waveoptics.net
(3 3 ) 3 8 9 8 2 7 5 0
Juan Alvaréz # 40
Col. Toluquilla
Tlaquepaque, Jalisco
C.P. 45610 Mexico
A (mm)
B (mm)
C (mm)
1200
1000
145
Identification of reel, property of WAVEOPTICS.
Folio XX-XXX-XX-EN | Last Review 06-26-2019 | 4
TECHNICAL DATA SHEET
PRODUCT FAMILY
Applications
metro
Protections
Colors Scheme
Loose tubes/tight buffers/fibers Colors
Coating colors
Information Printed in Cover
= /YEAR/ WAVEOPTICS= = F8SJAD-3/16= = /FIBERTYPE/ /FIBERS NUMBER/= = /METERS/ M=
-
Printed in white and resistant to physical tests over the marking, specified under the
IEC 60794-1-2:2003 norm.
Printed interval: 1 ± 0,2%m.
The label can be changed according to the user requests.
www.waveoptics.net
sales@waveoptics.net
(3 3 ) 3 8 9 8 2 7 5 0
Juan Alvaréz # 40
Col. Toluquilla
Tlaquepaque, Jalisco
C.P. 45610 Mexico
Folio XX-XXX-XX-EN | Last Review 06-26-2019 | 5
TECHNICAL DATA SHEET
PRODUCT FAMILY
Configuration
FCA - XX - X - S - X - XXX
Cable Diameter
Core diameter
30 - 3mm diameter
20 - 2mm diameter
16 - 1.6mm diameter
9 - 900?m for fiber A , E, N, H, R
625 - 62.5?m for fiber B
50 - 50?m for fiber L, M, P, I
Fiber optic type
Coating
A
E
N
B
L
M
P
H
R
I
R - Riser
P - Plenum
L - LSZH
- SM G652D Fiber
- SM BlueKing G657.A2 Fiber
- SM BlueKing Elite G657.B3 Fiber
- MM OM1 Fiber optic
- MM OM2 TRUE BEND Fiber Optic
- OM3 TRUE BEND Fiber Optic
- MM OM4 TRUE BEND Fiber Optic
- SM G652D CORNING Fiber
- SM G657A2 LBL CORNING Fiber Optic
- MM OM3 CORNING Fiber Optic
Configuration example
FCA - 30 - A - S - R- 9
This is the configuration of a cable of 3mm of diameter, built with SM G652D Fiber optic
simplex of Riser cover with core of 900?m.
www.waveoptics.net
sales@waveoptics.net
(3 3 ) 3 8 9 8 2 7 5 0
Juan Alvaréz # 40
Col. Toluquilla
Tlaquepaque, Jalisco
C.P. 45610 Mexico
Folio XX-XXX-XX-EN | Last Review 06-26-2019 | 6
TECHNICAL DATA SHEET
PRODUCT FAMILY
www.waveoptics.net
sales@waveoptics.net
(3 3 ) 3 8 9 8 2 7 5 0
Juan Alvaréz # 40
Col. Toluquilla
Tlaquepaque, Jalisco
C.P. 45610 Mexico
Folio XX-XXX-XX-EN | Last Review 06-26-2019 | 7