Features Mounting Options Housing The recommended wall mounting height is 18’ to 24’. Units include rear 1/2” conduit points access with drill points for mounting. The bronze die-cast aluminum housing, thick prismatic glass refractor and stainless steel hardware together make the WSL Series Wallpacks resistant to both weather and vandalism. Photometric Data Ballast (Isofootcandle Plots) All HID fixtures come standard with a CWA highpower factor, multi-tap or 480V ballast. CFL fixtures include 120/277V electronic ballasts. 18” WSL 60' Lamps Lamp Included Designed for 18 to 24 foot mounting heights, the WSL Wallpack delivers high light levels over a very large area for offices, schools, shopping complexes, garages and walkways. 40°C Ambient Rated ILABL VA A CFL 40' 20' 0 20' 40' 60' 60 The WSL luminaire uses mogul base, metal halide lamps (175 - 400W) and HPS (250-400W) lamps. (Note: To increase light levels by 20%, specify a pinoriented socket using a MS400/HOR.) CFL Fixtures include 4-pin quad lamps. 40 20 0 10 Access / Wiring The side-hinged door opens easily using two captive stainless steel screws to provide easy access to internal components. Wiring options include mounting over a 4” recessed junction box or surface mounting using convenient conduit entries located on side and bottom of fixture. Additional knockouts are provided for optional photocell. E HID LIGHTING – WALLPACKS & GARAGE LIGHTERS WSL Series 18” Wallpack 7 20 3 40 1 400W MH Wall Pack at 20’ mounting height. .5 60 .3 Listed for Wet Locations Consult Factory for CUL Availability Dimensions Fixture Height WSL Series 9” Fixture Width 18” W Fixture Depth 13” Approx. Ship Wt. 26 lbs. MH-400 Watt/Clear Mounting Height: 20’ Number of Fixtures: 2 Lamp Lumens: 32,000 The WSL Series photometric data is based on a 400 watt clear MH lamp rated at 32,000 lamp lumens. Footcandle values for other wattages are obtained by multiplying the chart values by the following factors: Lamp/Wattage 400W MH/HOR 400W MH 250W MH Factor 1.20 1.00 .63 Lamp/Wattage Factor 400W HPS 250W HPS 1.56 .91 H 20' 10 fc 5 fc D 65' 0 5 206 Minimum Footcandle Values 60' 10 55' 50' 15 20 25 30 35 40 45 50 45' 40' 35' 30' 25' 20' 15' 10' 5' 0' 5' 10' 15' 20' 25' 30' 35' 40' 45' 50' 55' 60' 65' 55 60 65 70 Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 2 fc 1 fc .5 fc WSL Series 18” Wallpack Mounting Position Wattage Lamp Catalog Number Wall 175W MH 200W PS/MH 250W MH 250W PS/MH 320W PS/MH 350W PS/MH 400W MH 400W PS/MH 400W MS/HOR Position-oriented socket 250W HPS 400W HPS (2) 26W CFL (2) 32W CFL (2) 42W CFL WSL0417-(a)(b) WSL0820-(a)(b) WSL0425-(a)(b) WSL0825-(a)(b) WSL0832-(a)(b) WSL0835-(a)(b) WSL0440-(a)(b) WSL0840-(a)(b) WSL0740-(a)(b) Wire Guard Ordering Code WGL Vandal Shield WSL0525-(a)(b) WSL0540-(a)(b) WSL0352-D* WSL0364-D* WSL0384-D* Ordering Code PGL *Dual-tap 120/277V (CFL only) Voltage (a) Options (b) (Factory Installed) Accessories (Field Installed) 5 = 4 80V M = Multi-tap tapped @ 277V M5 = 120 - 480V 400 W MH Only D = Dual-tap 120/277V (CFL only) (x)B = Button Photocell -designate voltage (x): 1 = 120V 2 = 277V 3 = 208V 4 = 240V WGL = Wire Guard PGL = Polycarbonate Guard (Vandal Shield) PT-20 = External Photocell WSL-TS = Tamperproof Screws (not shown) WSL-TSD = Tamperproof Screws & Screwdriver (not shown) Glare Shields WSL-GS = Side Cutoff WSL-GSF = Full Cutoff WT = White Housing BK = Black Housing Glare Shield Side Cutoff Ordering Code WSL-GS Full Cutoff Shield Ordering Code WSL-GSF Example WSL 0 4 Series Mounting Light Source WSL = 18” Wallpack 0 = Hard wire 4 = MH 17 M WT Wattage Voltage Options 17 = 175W M = Multi-tap WT = White Housing Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 207 HID LIGHTING – WALLPACKS & GARAGE LIGHTERS Accessories WSL Wallpack Ordering Information