MIRROSTAR MirroStar luminaires combine superior performance with easy maintenance to provide a unique solution for area lighting. The Miro4™ optics creates a safe and secure environment by producing a distribution that is very uniform but also generates good vertical illumination. In addition, all MirroStar luminaires meet IES full cutoff classification to help limit light pollution and light trespass. Lamp access is through the piano hinged door assembly. The ballast components are mounted to a single, removable tray. The housing is 18 gauge aluminum finished with a 7 stage pretreatment and electrostatically applied polyester powder coat paint, providing a long lasting finish. This combination of premium optical performance and durable construction make the MirroStar an intelligent choice in large area retail and commercial lighting. HL-1928 10/01 “ MIRROSTAR “ MirroStar reflectors provide the highest quality lighting by combining the latest technology in optical design, material and construction. Holophane engineers built MirroStar reflectors around the lamp to optimize the performance of the lamp/reflector system, enabling the highest percentage of lamp lumens to be utilized and direct light for optimal distribution. The reflector/lamp system provides many benefits; wide spacing, good vertical illumination, superior uniformity and IES full cutoff. Life cycle cost of a lighting system is a very important consideration. First cost is sometimes weighed more heavily than the 20-30 year cost of ownership. Re-lamp costs and other maintenance issues should not be overlooked when choosing a lighting system. MirroStar helps to reduce ownership costs. All MirroStar luminaires are supplied with a Holophane manufactured ballast. All electrical components have a five-year warranty. The ballast components are mounted to a detachable tray with tool-less disconnect to allow quick field removal and replacement. Features and Benefits HOLOPHANE® 2 Performance Specification Luminaire shall be Holophane MirroStar series, catalog No. MS ______. This fixture shall consist of mounting, optical, support, and electrical systems and will provide certain performance characteristics as follow: 1 .1 5.0 0.2 .5 .4 .3 1.0 .2 2.0 1 .1 5.0 0 1 0 1 2 3 4 5 Ratio=Distance Across/Mounting Height 4 3 House Side Ratio=Distance Along/Mtg Ht MS3AC10HPXXH3-MSHS3K 1000W Clear HPS Mounting Height 40’ Test No. 51140 Street Side .10 .20 2 2.0 1 0.5 0.2 .5 .4 .3 .2 .1 5.0 0 House Side .2 1 .1 5.0 5 4 3 Street Side 0.5 .10 .20 .5 0.2 0.1 .4 .50 .3 1.0 2 .2 2.0 1 .1 0 MS2A400MHXXH3-HS 400W Clear SMH Mounting Height 40’ Test No. 51204 .50 1.0 .3 1.0 5.0 0 1 0 1 2 3 4 5 Ratio=Distance Across/Mounting Height 0 5 .4 .10 .20 .50 2.0 House Side 0.5 .50 2 .5 MS2A400MHXXH3 400W Clear SMH Mounting Height 40’ Test No. 51205 Ratio=Distance Along/Mtg Ht 3 2 0 1 0 1 2 3 4 5 Ratio=Distance Across/Mounting Height 5 4 3 2 House Side 4 House Side Ratio=Distance Along/Mtg Ht MS3AC10HPXXH3 1000W Clear HPS Mounting Height 40’ Test No. 51141 Street Side .10 .20 3 0.2 0.5 0 0 1 0 1 2 3 4 5 Ratio=Distance Across/Mounting Height 0 0 1 0 1 2 3 4 5 Ratio=Distance Across/Mounting Height 5 Ratio=Distance Along/Mtg Ht .2 2.0 Ratio=Distance Along/Mtg Ht House Side Ratio=Distance Along/Mtg Ht 2 4 Street Side Street Side 0.5 0.2 .10 .20 .50 .5 0.1 .4 .3 1.0 .2 2.0 1 .1 CU (Dashed Curves) Optical System A fully reflective interior constructed of Miro4™ (enhanced pre-anodized aluminum), minimum of .020" thick, with a specular component of at least 92% and a total reflectivity of 95%. Integrity of the reflective panels is held intact by a continuous band around the central circumference. .3 1.0 CU (Dashed Curves) Exterior All exterior surfaces shall receive a seven stage cleaning and iron phosphate pretreatment prior to painting. The finish shall be a fade resistant (color) polyester powder paint baked on to provide a hard, durable coating. 3 .4 5 CU (Dashed Curves) Lens 3/16" (1/8" in medium housing) thick clear tempered flat glass shall be attached to the door-frame with RTV. 4 .5 Street Side 0.5 0.2 .10 .20 .50 CU (Dashed Curves) One-piece heavy duty, 13 gauge formed aluminum, held together with a rigid extruded aluminum riveted frame. Frame shall be fully lined about the perimeter with a high temperature, closed - cell gasket material to provide an insect and dust free interior. Door frame shall be connected to the housing with a continuous hinge that runs the full width of the housing and is secured with five or more screws. Two captive screws shall be used for closure and for easy lamp access. 5 MS2A400HPXXHQ 400W Clear HPS Mounting Height 30’ Test No. 51201 CU (Dashed Curves) Door Frame MS3AC10MHXXHQ 1000W Clear MH Mounting Height 40’ Test No. 50699 CU (Dashed Curves) Housing Housing shall consist of one piece 18 gauge formed aluminum, with smooth welded seams. An 11 gauge galvanized steel reinforcement plate shall be attached to the rear of the housing for added stability. 5.0 0 1 0 1 2 3 4 5 Ratio=Distance Across/Mounting Height 0 Photometrics Electrical System The electrical system shall consist of Holophane ballast and components attached to a tray. Tray shall be removable without use of tools. Ballast factor shall be 1.0. MIRROSTAR 3 “ HOLOPHANE® Ordering Data How to construct a catalog number: EXAMPLE: MS — 2 — A — 400MH — 12 — H — 3 — NN — K — F1 1 Catalog no. 2 3 4 5 6 7 8 9 10 Description 1 Luminaire ___ MS C MirroStar™ UL and CUL listed for wet locations B 2 Housing size 3 4 5 6 7 8 A ___ 2 Medium, 250W, 400W ___ 3 Large, 1000W Housing shape ___ A Rectangular Wattage and source ___ 250HP 250W HPS ___ 400HP 400W HPS ___ C10HP 1000W HPS ___ 250MH 250W MH ___ 400MH 400W MH ___ 400PM 400W MH pulse start ___ C10MH 1000W MH Voltage ___ 12 120 volt ___ 20 208 volt ___ 24 240 volt ___ 27 277 volt ___ 34 347 volt ___ 48 480 volt ___ MT Multi-voltage (120/208/240/277V) ___ VT Vari-tap (120/277/347V) Lamp ___ H Horizontal lamp Beam pattern ___ 3 IES Type III distribution ___ Q IES Type V distribution square Mounting ___ NN No arm ___ SS 6” arm for square pole ___ LS 12” arm for square pole ___ SW Wall mount plate ___ LW Wall mount plate with 12” arm Housing Size Medium Large A mm (in) 210 (8.25) 254 (10.0) B mm (in) 533 (21) 648 (25.5) C mm (in) 711 (28) 857 (33.75) 9 Color ___ K ___ W ___ Z Black White Bronze 10 Options ___ F1 ___ F2 ___ PS ___ R ___ TB Single fusing, 120, 240, 277 & 347V Double fusing, 208, 240, 480V Protected starter Photocontrol receptacle Terminal block Accessories ___ MSHS2X1 ___ MSHS3X1 House side shield- medium housing House side shield- large housing Notes: 1 Insert finish for “X” in catalog number (“Z” i standard) Order number______________ Job name________________ Holophane 214 Oakwood Ave., Newark, OH 43055 / Holophane Canada, Inc. 9040 Leslie Street, Units 8 and 9, Richmond Hill, ON L4B 3M4 / Holophane Europe Limited, Bond Ave., Milton Keynes MK1 1JG, England./ Unique Lighting Solutions, 13/30 Heathcote Road, Moorebank, NSW 2170 Australia/ Holophane, S.A. de C.V., Apartado Postal No. 986, Naucalpan de Juarez, 53000 Edo. de Mexico Contact your local Holophane sales representative for application assistance, and computer-aided design and cost studies. For information on other Holophane products and systems, call the Inside Sales Service Department at 740-345-9631. In Canada call 905-707-5830 or fax 905707-5695. Limited Warranty and Limitation of Liability Refer to the Holophane limited material warranty and limitation of liability on this product, which are published in the “Terms and Conditions” section of the current product digest, and is available from our local Holophane sales representative. Visit our web site at www.holophane.com HL-1928 10/01 ©Copyright Holophane 2001 Printed in USA