WSL Series – 18" Wall Pack Dimensions WSL Series SPARTAN ® Fixture Length 9" Fixture Width 18" Fixture Depth 13" UL 40°C Ambient Rated Approx. Ship Wt. 26 LBS. ¤ LISTED FOR WET LOCATIONS CONSULT FACTORY FOR CUL AVAILABILITY I.E.S. photometrics available by e-mail or on disk W 60' 40' 20' 0 20' 40' 60' 60 40 20 0 10 7 20 3 40 D 1 .5 60 .3 400W MH Wall Pack at 20' mounting height. L Designed for 18-24 foot mounting heights, the WSL delivers high light levels over a very large area for offices, schools, shopping complexes, garages and walkways. Access/Wiring The side hinged door opens easily with the removal of only two stainless steel screws to provide easy access to internal components. Wiring options: (2) 1/2" conduit entries on side. Ballast All sizes are supplied with a CWA-HPF multi-tap ballast (except 480V). Housing/Refractor The bronze die-cast aluminum housing, thick prismatic glass refractor and stainless steel hardware combine to make the WSL resistant to weather and vandalism. Gaskets Both the door and prismatic glass lens utilize weather proof silicone gasketing to seal out contaminants. Lamps MH-400 Watt/Clear Mounting Height: Number of Fixtures: Lamp Lumens: 20' 2 32,000 The WSL Series photometric data is based on a 400 watt clear MH lamp rated at 32,000 lamp lumens. Footcandle values for other wattages are obtained by multiplying the chart values by the following factors: The WSL luminaire uses mogul base metal halide lamps, (175-400W) and HPS (250-400W) lamps. Note: To increase light levels by 20%, specify a pin-oriented socket using a MSX400/HOR. Labels Lamp/Wattage Factor Lamp/Wattage Factor 400W MH/HOR 400W MH 250W MH 1.20 1.00 .63 400W HPS 250W HPS 1.56 .91 The WSL fixture is UL listed for wet locations. Mounting The recommended wall mounting height is 18'–24'. 2) Rear 1/2" conduit holes access with drill holes for mounting. Minimum Footcandle Values 20' 10 fc Warranty The WSL Wall Pack sold by C.E.W. Lighting, Inc., unless otherwise specified, will be warranted to be free of defects in materials and workmanship under normal use and service for a period of five (5) years from date of shipment, 175W1000W. Lower wattages will be warrented for (2) years. If found to be defective by us, we will replace the non-performing components. 5 fc 2 fc 60' 65' 0 5 55' 50' 45' 40' 35' 30' 25' 20' 15' 10' 5' 0' 5' 10' 15' 20' 25' 30' 35' 40' 45' 50' 55' 60' 65' 1 fc .5 fc 10 15 20 25 30 35 40 45 50 64 55 60 65 70 TECHNICAL HOTLINE 1-800-242-5267 WSL Series 18" Wall Pack SPARTAN ® To build catalog numbers refer to inside front cover WSL Wall Pack Order Information Wattage Range: 175-400W Catalog Number Mounting Position Wall Wattage Lamp 175W MH WSL0417-(a)(b) 200W MH/PS WSL0820-(a)(b)* 250W MH WSL0425-(a)(b) ESS 250W MH/PS WSL0825-(a)(b)* ESS 320W MH/PS WSL0832-(a)(b)* ESS 350W MH/PS WSL0835-(a)(b)* 400W MH WSL0440-(a)(b) 400W MH/PS WSL0840-(a)(b)* 400W MSX/HOR Pin-oriented socket 250W HPS WSL0740-(a)(b) 400W HPS WSL0540-(a)(b) ESS ESS WSL0525-(a)(b) Lamp Included (a)Voltage Suffix Key: Indicate voltage in space (a) Description 120 Volt 277 Volt 208 Volt 240 Volt 480 Volt Multitap 1 2 3 4 5 M 120 - 480V M5 Standard on MH, tapped @ 277V (b)Options: Indicate options in space (b) (Factory Installed) Description Wire Guard 400W MH Only SUFFIX (b) Button Photocell B High-2-Low (Excludes 200W MH/PS) (See Pgs. 28-29) H White Housing WT Vandal Shield Glare Shields– Full Cutoff WSL-GSF Glare Shield Side Cutoff WSL-GS Accessories: (Field Installed) AP Accessories Catalog Number Description Wire Guard WGL Polycarbonate Guard (Vandal Shield) PGL External Photocell PT-20 Tamperproof Screws WSL-TS Tamperproof Screws & Screwdriver WSL-TSD Glare Shield Side Cutoff * Pulse Start lamps MUST be UNIVERSAL burn lamps. Full Cutoff Shield TECHNICAL HOTLINE 1-800-242-5267 65