Scrap Processing
S O L U T I O N S AT W O R K
Conveyors & Engineered
Systems For The
Metalworking Industry
. . . Since 1950
METAL CHIP PROCESSING SYSTEMS
A Full Range Of
Heavy-Duty Systems Sized
To Fit Your Chip Reclamation Needs
Transform oily, hard to manage turnings into easy to
handle metal chips and reclaim valuable cutting fluids.
Maximize pay-back and profits by centrifuging or briquetting
your wet chips, while maintaining a safe and efficient
production operation.
“The opportunity to
establish a new profit
center where others only
see a costly liability” . . .
Reclaim
Fluids
Produce
Recyclable
Briquettes
Obtain Dry, Easy-To-Handle Chips
In-floor Harpoon™ Conveyors for
central chip collection feature liquid
tight construction, low power
requirements and low per foot, cost.
Pacesetter II ™
Briquetter turns loose chips into
dense, puck shaped solids increasing your scrap value and reclaiming
cutting oil.
Filtration Systems are available with
self cleaning, permanent media
allowing labor free operation.
Centrifugal and magnetic separators
are also available.
Prab MiniSystem™, is a self contained chip processing system that
comes completely wired, and readyto-run. Small footprint - big results!
Diagonal-Shaft Wringers - the new
standard in the industry. Up to
700g’s of force removes 98%
of cutting fluids from your chips.
Vertical Axis Crushers (VAC)
reduce bushy wads of turnings to
easily handled dense chips.
Features an automatic solids ejector.
Prab Turnings Shredders reduce
stringy material for efficient
non-stop chip processing.
METAL STAMPING SCRAP SYSTEMS
Boost Productivity
Automate press scrap removal and maximize
press “up-time”. Efficiently collect, transfer
and distribute all types of stamping
scrap with a Prab engineered
stamping scrap system.
“Prab conveyors make
the difference in
today’s competitive
marketplace.”
Oscillating Conveyors collect
and transfer all types of scrap with
positive discharge. Low cost units
require minimal maintenance.
Steel Belt Conveyors (6” and 9”
pitch) are extra heavy-duty and
designed to elevate large volumes
of scrap. Available in open or closed
frame construction.
Magnetic Conveyors provide positive
transfer/discharge of ferrous scrap
without carry-over. Rugged sealed
construction and self-lubricating with
ceramic or rare-earth magnets.
Shuttle Conveyors provide bidirectional, even load-out of scrap
trailers. Automatic level sensors keep
your labor to a minimum.
Portable Steel Belt Conveyors
service individual presses as needed and are perfect for basic scrap
removal.
Pivot Belt™ Conveyors are
specifically designed to move oily
slugs, knockouts and thin-gauge
scrap with negligible carry-over.
Scrapveyor II™ efficiently conveys oily
or dry stamping scrap. Prab’s single
chain design eliminates carry-over and
minimizes wear. The universal solution!
Member
DIE CASTING SCRAP-TO-REMELT SYSTEMS
Depend On Prab Conveyors
For Non-Stop Production
Automatic systems or single conveyors will
increase efficiency and profit. Prab conveyors can
reduce employee exposure to hazardous material
handling while freeing up labor for more productive
purposes. Systems are compatible with
Aluminum, Zinc and Magnesium.
“Prab heavy-duty conveyors
are used throughout the
foundry for efficient
flow of parts and
scrap.”
Steel Belt Conveyors are available
in 2-1/2", 4", 6" and 9" pitch. Ideal
for trim presses and scrap elevating.
Casting Coolers efficiently and cleanly cool hot die castings. Engineered
to meet your requirements with single
or multiple cooling fans.
Oscillating Conveyors are quiet and
smooth, providing a uniform material
flow. Low maintenance design
resists heat and impact.
Furnace Feeders with replaceable
stainless steel feed chutes meter
scrap directly into remelt furnace.
For continuous or batch load feeding.
P.O. Box 2121
Kalamazoo, MI 49003
(269) 382-8200
Phone
(800) 968-PRAB Toll Free
(269) 349-2477
Fax
sales@prab.com E-mail
www.prab.com
Quench Conveyors are liquid-tight
with dependable steel belting.
Improves casting consistency. Use
where air cooling is not sufficient.
Web Site
Member
HP 2M 11/01 & 9/04