WHY LAPCO?
LAPCO IS FAMILY
LAPCO FR™ | 2 | 2016 CATALOG
CATALOG 2016
Men’s FR
04-07
08-09
10-11
12-13
FR Coveralls
FR Shirts
FR Jeans & Pants
FR Winter Wear
Ladies’ FR
14-15 FR Shirts
16-17 FR Pants & Denim
Non-FR
18-19 Non-FR Welding Shirts &
Welding Caps
Vinyl & Leather Gear
20
21
Umbrellas & Bags
Leather Arm Pads
Sizing
22-28
Customization Information
29-31
Laundering & Care
32
Industry Quick Reference
33
Certifications
34-35
LAPCO FR™ | 3 | 2016 CATALOG
FR Deluxe Coveralls
Flame-Resistant Deluxe Coveralls //
D.
NXCD45XX-Nomex®
Deluxe Coverall
C.
GOCLW6XX-GOLD LABEL
88/12 True Comfort
Deluxe Coverall
A.
CVFRD7XX-100% Cotton
Deluxe Coverall
B.
GOCD7XX-GOLD LABEL
88/12 Deluxe Coverall
* Reflective striping is not standard. Ask us about customization options.
A | FR DELUXE COVERALLS
CVFRD7XX
Gold Label
Lightweight
B | FR DELUXE COVERALLS
GOCD7XX
C | FR DELUXE COVERALLS
GOCLW6XX
D | NOMEX® COVERALLS
NXCD45XX
Fabric
7oz. FR 100%
Cotton Twill
with Moisture
Management Finish
Fabric
7 oz. FR 88/12
Cotton-Nylon Blend
Twill with Moisture
Management Finish
Fabric
6 oz. FR 88/12
Cotton-Nylon Blend
Twill with Moisture
Management Finish
Fabric 4.5 oz. Nomex® Comfort
ATPV
8.7 cal/cm2
ATPV
8.9 cal/cm2
ATPV
9.5 cal/cm2
ATPV
5.7 cal/cm2
SM - 6XL Short,
Reg, Tall, Xtall
Size
34 - 72 Short,
Reg, Tall, Xtall
Size
34 - 72 Short,
Reg, Tall, Xtall
Size
SM - 6XL Short,
Reg, Tall, Xtall
Size
Colors
HRC 2
Gray, Khaki, Navy, Orange, Red, Royal,
Spruce Green
HRC 2
HRC 2
HRC 1
Colors
Colors
Colors
Gray, Khaki, Navy, Red
Gray, Khaki, Navy
Gray, Khaki, Navy, Royal
LAPCO FR™ | 4 | 2016 CATALOG
Features
•Triple needle stitching on inseams, outseams, and arm seams
•Lightweight for Comfort, _but Durable
•Elastic at back of waist
•Pencil Pockets on left arm
•Zippered chest and left back
pockets to keep items secure
• Sewn with Nomex® thread
•Brass zippers with Nomex® tape
•Covered snaps for electricarc protection
•Pencil pocket on left chest
•Clip loop at right waist
•Tally book pocket on left leg
Close-Up
PENCIL POCKET
Close-Up
CLIP LOOP
Close-Up
TALLY BOOK POCKET
LAPCO FR™ deluxe flame-resistant coveralls are available in four durable fabrics to keep you cool, dry, and safe.
These coveralls have reinforcements for longevity and include many features for compliance and comfort.
Featured Fabrics:
LAPCO FR™ | 5 | 2016 CATALOG
FR Coveralls
Flame-Resistant Coveralls //
FR WELDING COVERALLS
FR WELDING COVERALLS
CVIN9NY
LAPCO FR welding coveralls are built sturdy with heavier
fabric that welders prefer. Multiple pockets for convenience
and easy access to tools and personal items.
Fabric
• Triple needle stitching on inseams, out seams, and arm
9oz. FR 100% Cotton
HRC 2
ATPV
13.2 cal/cm2
Size
SM - 6XL Short, Reg, Long, Xtall
Colors
•
•
•
•
•
seams.
Lightweight for comfort, but durable.
Elastic at back of waist.
Sewn with Nomex® thread.
Brass zippers with Nomex® tape.
Covered snaps for electric-arc protection.
Navy
LAPCO FR™ | 6 | 2016 CATALOG
LAPCO FR™ economy coveralls keep you safe and compliant. These
coveralls are the best value for your uniform dollar, while meeting
your need for comfort and protection. Perfect for contractors, our FR
economy coveralls have all the safety features you need, and none of
the bells and whistles you don’t.
* Reflective striping is not standard. Ask us about customization options.
FR ECONOMY COVERALLS
CVEFR7XX
NEW NOMEX® ECONOMY COVERALLS
NXCE45XX
Fabric
7oz. FR 100% Cotton
Fabric 4.5 oz. Nomex® Comfort
ATPV
8.7 cal/cm2
Size
SM - 6XL Reg, Tall
HRC 2
Colors
HRC 1
ATPV
5.7 cal/cm2
Size
SM - 6XL Short, Reg, Tall, Xtall
Colors
Gray, Khaki, Navy, Royal
Gray, Khaki, Navy
LAPCO FR™ | 7 | 2016 CATALOG
FR Shirts
Flame-Resistant Uniform, Western, and Henley Styles //
FR UNIFORM SHIRTS
IXXX7
Fabric
7oz. FR 100% Cotton
Twill with Moisture
Management Finish
ATPV
8.7 cal/cm2
Size
SM - 6XL
Reg, Long, Xlong
Colors
Blue/White, Gray, Khaki, Navy, Royal, Medium Blue,
Orange, Red, Khaki Brown, Khaki Camo
Pictured
•
IORA7
•
LAP-UM7VY
Gold Label
Advanced Comfort
FR WESTERN SHIRTS
FR UNIFORM SHIRTS
FR UNIFORM SHIRTS
Fabric
7oz. 100% Cotton
Twill with
Moisture Management
Finish-western-style
pockets and yoke
Fabric
7oz. 88% Cotton /
12% Nylon Blend
Twill with Moisture
Management Finish
Fabric
7oz. ADVANCED
COMFORT
88% Pima Cotton/12%
Nylon Blend Twill
with Ultra Soft Finish
ATPV
8.7 cal/cm2
ATPV
8.9 cal/cm2
ATPV
8.3 cal/cm2
Size
SM - 6XL
Reg, Long, Xlong
Size
SM - 6XL
Reg, Long, Xlong
Size
Colors
SM - 6XL
Reg, Long, Xlong
IXX7WS
Colors
Gray, Khaki, Navy
HRC 2
GOS7XX
Colors
HRC 2
Gray, Khaki, Navy
LAPCO FR™ | 8 | 2016 CATALOG
GOSAC7XX
Gray, Khaki, Medium Blue, Navy
HRC 2
NEW FR BASE LAYER SHIRTS
FRT-USHLS6W
LONG SLEEVE
Fabric 5.5oz. 100% Cotton Jersey Knit
White
NEW 6oz. FR UNIFORM SHIRTS
GOSLW6XX
Fabric
ATPV 7.4 cal/cm2
SM- 6XL Reg
Size
Colors
Gold Label
FR Base Layer Shirt
+
FR Advanced Comfort
Uniform Shirt
=
ATPV 25 cal/cm2
6 oz. FR 88/12 Cotton-Nylon Blend
Twill with Moisture Management Finish
ATPV 8.8 cal/cm2
Size
SM - 6XL Reg, Long, Xlong
Colors
Gray, Khaki, Navy
FR WELDING SHIRTS
FR HENLEY SHIRTS
FR PLAID SHIRTS
Fabric
Fabric
7oz. 100% Cotton
Jersey Knit
Fabric
7oz. 100% Cotton
Twill with
Moisture Management
ATPV
8.9 cal/cm2
ATPV
8.7 cal/cm2
Size
SM - 6XL Reg
Size
SM - 6XL
Reg, Long, Xlong
INXWS
ATPV
Size
Colors
• Khaki | 10oz. FR 100%
Cotton Twill Gabardine
• Navy| 9oz. FR
100% Cotton Twill
• K | 11 cal/cm2
• N | 13.2 cal/cm2
HRC 2
15 -24 Neck Sizes
Short, Medium, Long, XL
Khaki, Navy
FRT-HJE-XXX
Colors
HRC 2
Gray, Khaki, Navy
LAPCO FR™ | 9 | 2016 CATALOG
IXX7WS
Colors
HRC 2
Acadiana Austin Lubbock
FR JEANS & PANTS
A | FR MODERN JEANS
C | FR CARPENTER JEANS
P-INDM10
P-INDC
Modern FR Jeans with a low-rise fit and stylish
features. Known in certain circles as “The Sexy
FR Jeans”, they are rugged and comfortable.
ATPV 15 cal/cm2
Size 28-60 Waist
HRC 2
28-38 Inseam
Fabric 10oz. FR 100% Cotton Denim
Original FR Carpenter Jeans, comfort fit
with extra style and extra pockets to hold
all the tools you need to get the job done.
ATPV 14.8 cal/cm2
Size 28-60 Waist
HRC 2
28-38 Inseam
Fabric 13oz. FR 100% Cotton Denim
B | FR RELAXED FIT JEANS
D | FR BIB OVERALLS
P-IND
B13FRDN
Our Original Relaxed fit, boot cut jeans, for
the Classic Man. These jeans are made
tough to handle the rigors of the job.
Size 28-60 Waist
ATPV 14.8 cal/cm2
HRC 2
28-38 Inseam
Durable FR Denim Bib Overall, great for all
season wear, with multiple utility pockets
to keep all of your tools & gadgets secure.
Size SM - 6XL Short,
Reg, Tall, Xtall
Fabric 13oz. FR 100% Cotton Denim
ATPV 14.8 cal/cm2
HRC 2
Fabric
13oz. FR 100%
Cotton Denim
A
B
C
A. Back Pocket Detail
LAPCO FR™ | 10 | 2016 CATALOG
D
E | NEW FR CARGO PANTS
G | FR UNIFORM PANTS
P-INCXXT9
P-XXXX
Got plenty to carry around with you at work?
These are the pants for you. Many hands-free
carrying options included with this new style.
Size
28-60 Waist
ATPV 13.2 cal/cm2
HRC 2
28-38 Inseam
100% Professional-looking uniform pants. Durable
to match your work ethic, classy enough for the
meeting room. The Original LAPCO FR™
Uniform Pants. Available in 5 color options.
Khaki, Navy
Colors
Fabric 9oz. FR 100% Cotton Twill with
Moisture Management Finish
Colors
You can’t wear your pajama pants to work, but you
can wear LAPCO FR™ Advanced Comfort uniform
pants and that’s pretty close. Experience the
peak of comfort, durability, and safety.
Colors
28-60 Waist
28-38 Inseam
ATPV 8.7 cal/cm2
HRC 2
28-60 Waist
28-38 Inseam
Gray, Khaki, Navy, Red, Royal
Fabric 7oz. FR 100% Cotton Twill with
Moisture Management Finish
F | Advanced Comfort
P-XXXAC FR UNIFORM PANTS
Size
Size
All of our FR Jeans and Pants are certified
to meet your compliance needs.
ATPV 8.3 cal/cm2
HRC 2
Gray, Khaki, Navy
Fabric 7oz. FR 88% Cotton/ 12% Nylon
Blend Twill with Ultra Soft Finish
E
F
G
LAPCO FR™ jeans and pants come in various styles and have unique
features to satisfy your work wear needs. Try a pair and see for
yourself. We know you won’t be disappointed.
LAPCO FR™ | 11 | 2016 CATALOG
A
B
C
D
A| FR INSULATED JACKETS
JTFRXXDK
B| FR UTILITY JACKETS
JUFR7NY
C| FR HOODIE SWEATSHIRTS D| FR INSULATED PARKAS
PKFRXXDK
SWHFR14NY
Fabric
12oz. 100% Cotton
Duck Outer, 11oz. 100%
cotton and Nonwoven modacrylic
quilted lining
Fabric 7 oz. 100% Cotton
Twill Outer, 7oz. 100%
Cotton Twill lining
with Moisture
Management
Fabric
12.5 oz. 95% Cotton
5% Spandex
Blend Fleece
Fabric 12oz. 100% Cotton
Duck Outer, 11oz. 100%
cotton and Nonwoven modacrylic
quilted lining
ATPV
34 cal/cm2
HRC 3
ATPV
24 cal/cm2
HRC 2
ATPV
17 cal/cm2
HRC 2
ATPV
34 cal/cm2
HRC 3
Size
SM - 6XL Reg, Tall
Size
SM - 6XL Reg, Tall
Size
SM - 6XL Reg
Size
SM - 6XL Reg, Tall
Colors
Colors
Gray, Brown, Navy, Red
Colors
Navy
Colors
Navy
LAPCO FR™ | 12 | 2016 CATALOG
Gray, Navy, Red
FR WINTER WEAR
Flame-Resistant Insulated Clothing //
Our FR Insulated hoods are compatible
with our FR Insulated Jackets, Parkas,
and Coveralls and can be attached
or removed using the provided collar
snaps.
FR INSULATED BIB OVERALLS
FR INSULATED COVERALLS
FR INSULATED HOODS
BIFRXXDK
CIFRXXDK
PKHDXX
Fabric
12oz. 100% Cotton
Duck Outer, 11oz. 100%
cotton and Non-woven
modacrylic quilted lining
Fabric
12oz. 100% Cotton
Duck Outer, 11oz. 100%
cotton and Non-woven
modacrylic quilted lining
Fabric
12oz. 100% Cotton
Duck Outer, 11oz. 100%
cotton and Non-woven
modacrylic quilted lining
ATPV
34 cal/cm2
HRC 3
ATPV
34 cal/cm2
HRC 3
ATPV
34 cal/cm2
HRC 3
Size
SM - 6XL Reg, Tall
Colors
Size
SM - 6XL Reg, Tall
Colors
Gray, Brown, Navy, Red
Size
ONE SIZE
Colors
Gray, Brown, Navy, Red
LAPCO FR™ | 13 | 2016 CATALOG
Gray, Brown, Navy, Red
Ladies
FR Uniform Shirts
L-SFRACGY-Advanced Comfort
88/12 Cotton Nylon Blend
Uniform Shirt.
L-PFRD10M- Ladies FR Modern
Jeans (see page 17).
LAPCO FR™ | 14 | 2016 CATALOG
YOUR
SAFETY
IS OUR
PRIORITY
We have an EXTENSIVE RANGE of women’s
sizing in FR Workwear, eliminating the need for
wearing men’s or unisex sized uniforms.
FR Advanced Comfort
L-SFRACXX UNIFORM SHIRTS
Fabric
7oz. FR 88% Long-Staple Pima Cotton /
12% High-Tenacity Nylon Blend Twill
with Ultra Soft Finish
ATPV
8.3 cal/cm2
Size
XS - 6XL Reg, Long
Features
• Uniform style ladies work shirts
• Flattering shape for all women
• Color-matched FR buttons
• Sewn with Nomex® thread
• Available in Misses and Womens sizes
• Available in Gray, Khaki, Navy
HRC 2
Colors
Gray, Khaki, Navy
LAPCO FR™ | 15 | 2016 CATALOG
Ladies
FR Uniform Pants & Jeans
FR Advanced Comfort
L-PFRACXX UNIFORM PANTS
Fabric
7oz. FR Advanced Comfort
88% Long-Staple Pima
Cotton 12% High-Tenacity
Nylon Blend Twill
ATPV
8.3 cal/cm2
Size
0-26 Short, Regular, Tall
Features
• Uniform Style Ladies Work Pants
• Flattering Mid-Rise Waist
• Perfect Companion of our Ladies FR Uniform Shirts
• Sewn with Nomex® Thread
• Available in Misses and Women’s Sizes
• Available in 3 lengths
• Available in Gray, Khaki, Navy
HRC 2
Colors
Gray, Khaki, Navy
Ladies FR CLASSIC JEANS
L-PFRD10C
Fabric
10oz. 100% Cotton Denim
ATPV
15 cal/cm2
Size
0-26 Short, Reg, Tall
Back Pocket Detail
HRC 2
Features
• Classic Fit and Styling
• Flattering mid-rise waist
• Perfect Companion
of our Ladies FR
Uniform Shirts
• Sewn with Nomex®
Thread
• Available in Misses
and Women’s Sizes
• Available in 3 lengths
LAPCO FR™ | 16 | 2016 CATALOG
SOFT
WEARING
HARD
WORKING
Our NEW RANGE of Ladies
FR Uniform Pants & Jeans
are ready to tackle anything
you can throw at them.
Our Ladies FR jeans are made to fit and flatter all women. Now you can have safety on the job
without the inconvenience of wearing men’s or unisex sized FR jeans. These are jeans for the
modern working woman.
Ladies FR MODERN JEANS
L-PFRD10M
Fabric
10oz. 100% Cotton Denim
ATPV
15 cal/cm2
Size
0-26 Short, Reg, Tall
Back Pocket Detail
HRC 2
Features
• Modern Fit and Styling
• Trendy Top-Stitching
• Perfect Companion
of our Ladies FR
Uniform Shirts
• Sewn with Nomex®
Thread
• Available in Misses
and Women’s Sizes
• Available in 3 lengths
LAPCO FR™ | 17 | 2016 CATALOG
NON-FR WELDING SHIRTS
DS | Denim
LS | Khaki //
HEAVY-DUTY WELDING SHIRTS
The Original LAPCO heavy-duty
welding shirts. These shirts have
the snaps and heavier materials
that welders prefer. Our welding
shirts simplify work life and include
many features for protection,
compliance, and comfort.
Fabric
LS- Khaki 10 oz.
100% Cotton
DS- 10 oz. 100%
Cotton Denim
Size
15 -24 Neck Sizes
Short, Medium, Long, XL
Features
• • Four rows of lock stitching on the front placket to prevent unraveling.
• • Double needle stitching on pockets, flaps, and shoulder seams.
• • Stainless steel snaps for stronger attachment and durability.
• KB | Khaki Brown • KBLK | Khaki Black
• KCS | Khaki Camo • KG | Khaki Green //
HEAVY-DUTY TWO-TONE WELDING SHIRTS
LAPCO heavy-duty two-tone welding
shirts have the snaps and heavier
materials that welders prefer.
These shirts simplify work life and
include many features for protection,
compliance, and comfort.
Fabric
Size
10oz. 100% Cotton Khaki
with 12oz. 100% Cotton
Duck on the collar,
yoke, pocket flaps,
sleeves, and cuffs
15 -24 Neck Sizes
Short, Medium, Long, XL
Features
•
• Four rows of lock stitching on the front placket to prevent unraveling.
•
• Double needle stitching on pockets, flaps, and shoulder seams.
•
• Stainless steel snaps for stronger attachment and durability.
850 //
MID-WEIGHT WELDING SHIRTS
LAPCO mid-weight welding shirts
are constructed to last and meet
the needs of welders. Designed for
welders by welders. These shirts are
what you need to get the job done.
Fabric
Khaki 8.5 oz.
100% Cotton
Size
15 -24 Neck Sizes
Short, Medium, Long, XL
Features
•
• Four rows of lock-stitching on front placket to prevent unraveling.
•
• Double needle stitching on pockets, flaps, and shoulder seams.
•
• Stainless steel snaps for strong attachment and longevity.
LAPCO | 18 | 2016 CATALOG
WELDING CAPS
LAP-C //
4-PANEL HIGH CROWN WELDING CAPS
Sizes
6 3/4 – 8
Colors
The original LAPCO welding caps.
High Crown, 4-Panel styling.
Pre-shrunk and reversible.
assorted, solid black, solid white
Available in assorted, black, and white.
LAP-6C //
6-PANEL LOW CROWN WELDING CAPS
Sizes
6 3/4 - 8
Colors
The welders choice in high-quality
welding caps. Low Crown, 6-Panel
styling. Pre-shrunk and reversible.
assorted, solid black, solid white, camo
Available in assorted, black, white,
and camo.
LAP-CFA //
ONE SIZE FITS ALL WELDING CAPS
Colors
assorted, solid black, solid white, camo
100% pre-shrunk cotton,
reversible, 6-panel welding caps.
Elastic on band makes these
one size fits all welding caps
comfortable and easy to wear.
LAP-6CFRXX //
FR 6-PANEL HIGH CROWN WELDING CAPS
Sizes
Colors
6 3/4 – 8
Gray, Khaki, Navy
LAPCO | 19 | 2016 CATALOG
FR Welding Caps. 7oz. 100%
Flame-Resistant Cotton Twill
Moisture Management Finish
Low Crown, 6-Panel styling.
Available in Gray, Khaki, and Navy.
VINYL & LEATHER GEAR
LAP-UMVXXX //
HEAVY-DUTY INDUSTRIAL UMBRELLAS
Blue: 18 oz. Heavy-Duty Vinyl
Red: 18 oz. Heavy-Duty Vinyl
Yellow: 18 oz. Heavy-Duty Vinyl
Camo: Heavy-Duty Acrylic Coated Canvas
FR Orange: Flame-Resistant, HeavyDuty Acrylic Coated Canvas
Size
5’ or 7’
BLUE | RED | YELLOW | CAMO | FR ORANGE
5’ yellow umbrella has an aluminum frame.
Y-UMB 7’CASE
Colors
LAP-UMST
Fabric
7’ umbrellas have black, powder-coated aluminum frames.
All umbrellas have reinforced seams sewn with binding.
All umbrellas feature tilt function. Cases and tripod
stands available.
LAP-BVXXXX | NO DIVIDERS
LAP-BVDXXXX | WITH DIVIDERS //
18oz. WEATHER-RESISTANT VINYL BAGS
Fabric
18 oz. Heavy-Duty Vinyl
Size
S - 12” X 12” X 24”
M - 12” X 12” X 30”
L - 14” X 14” X 36”
XL - 16” X 16” X 36”
Colors
BLACK|CAMO|GRAY|NAVY|OILFIELD CAMO|RED|ROYAL
LAPCO vinyl bags are useful for many purposes. These
bags are constructed of 18oz. leather-like weather resistant
vinyl with woven handle straps that are 2” wide, and a
durable, heavy-duty zipper. Our bags are made to last!
LAPCO | 20 | 2016 CATALOG
LAP-AR | RIGHT ARM
LAP-AL | LEFT ARM //
LEATHER ARM PADS
• LAPCO Leather Arm Pads provide protection from heat and
support the arm. They will not hinder arm movement. These arm
pads are made with high-quality foam insulation, and they are
tapered to provide an ergonomic fit. Premium quality since 1989.
LAPCO | 21 | 2016 CATALOG
COVERALL SIZING
• To find your coverall size, measure your chest and inseam, then choose the corresponding size.
• If you are in between measurements, choose the larger size. • If waist size is larger than chest size,
use waist measurement to choose your size.
ALPHA & NUMERIC SIZING
ALPHA
SIZES
SMALL
MEDIUM
LARGE
XL
2XL
3XL
4XL
5XL
6XL
7XL
NUMERIC
SIZES
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
MAX CHEST
MEASUREMENT
34”
36”
38”
40”
42”
44”
46”
48”
50”
52”
54”
56”
58”
60”
62”
64”
66”
68”
70”
72”
Sizes are based on actual body measurements.
CHEST:Place 0” mark of the
tape measure in the center of
your chest. Tape should wrap
around the broadest part of
the chest, under the arms, and
resting across the shoulder
blades, back to the center of
chest. Tape should be level
and laid flat, held neither too
tight, nor too loose. The point
where the tape meets the 0”
mark (in the center front of
the chest) is your
measurement.
INSEAM: Use a pair of pants
that fit you well (they
should not be too loose around
the waist). Measure the inseam
of the pants by positioning the
tape’s 0” mark on the center
seam of the crotch, down the
inside leg seam, to the hem.
The point where the tape
meets the hem is the inseam
length.
INSEAM LENGTHS
Length of Garment
Coverall Inseam
Measurement
Short
28”
Regular
30”
Tall
32”
Extra Tall
34”
WAIST: Place 0” mark of the
tape measure in the center of
your natural waist. Tape should
wrap around the back to the
front center of waist. Tape
should be level and laid flat,
held neither too tight, nor
too loose. Do not suck in
your stomach or you will get
a false measurement. The
point where the tape meets
the 0” mark is your waist
measurement.
NOTE: When taking these measurements, use a cloth tape measure, not a metal one.
Measurements should be taken over standard undergarments. If you plan to wear
clothing beneath coveralls, order one size larger, to accomodate the extra garments.
LAPCO FR™ | 22 | 2016 CATALOG
SHIRTS SIZING
To find your shirt size, use your neck and sleeve
measurements. If you are in between sizes,
choose the larger size.
ALPHA TO NUMERIC SIZING
NECK: Place 0” mark of the
tape measure in the center of
your neck. Tape should wrap
around the neck, under the chin
resting comfortably at your
collar line, back to the center
front of neck. Tape should be
laid flat, held neither too
tight, nor too loose. The point
where the tape meets the 0”
mark (in the center front of
the neck) is your
measurement.
SLEEVE LENGTH MEASUREMENTS
ALPHA
SIZE
NECK
SIZE
SHORT
MEDIUM/
REGULAR
LONG
EXTRA
LONG
14.5
31
32
33
34
15
32
33
34
35
15.5
32
33
34
35
16
33
34
35
36
16.5
33
34
35
36
17
34
35
36
37
17.5
34
35
36
37
18
34
35
36
37
2XL
19
35
36
37
38
3XL
20
35
36
37
38
4XL
22
36
37
38
39
5XL
23
36
37
38
39
6XL
24
36
37
38
39
SMALL
MEDIUM
LARGE
XL
SLEEVE: To measure your
sleeve length, start at the
center of the back below
the back of the neck, and
measure the distance to the
shoulder seam. Next, measure
the distance from shoulder
seam to bottom of cuff.
Finally, add these two
numbers to get your sleeve
length.
NOTE:
When taking these measurements,
use a cloth tape measure,
not a metal one.
Measurements should be taken over
standard undergarments.
LAPCO FR™ | 23 | 2016 CATALOG
LAPCO FR™ | 24 | 2016 CATALOG
INSULATED CLOTHING SIZING
Jackets-Coveralls-Bib Overalls
• To find your jacket size, measure your chest.
• For insulated coverall sizing, use chest and inseam measurements.
If your waist size is larger than your chest size, use your waist measurement to choose your size.
• To find your size in our insulated bib overall, use your waist and inseam measurements.
If you are between measurements, choose the larger size.
ALPHA TO NUMERIC SIZING
ALPHA
SIZES
SMALL
MEDIUM
LARGE
CHEST/WAIST
MEASUREMENT
30” - 32”
34” - 36”
38” - 40”
XL
42” - 44”
2XL
3XL
4XL
5XL
6XL
46” - 48”
50” - 52”
54” - 56”
58” - 60”
62” - 64”
7XL
66” - 68”
*waist measurements are for the natural waist NOT pants size
Sizes are based on actual body measurements.
CHEST:Place 0” mark of the
tape measure in the center of
your chest. Tape should wrap
around the broadest part of
the chest, under the arms and
resting across the shoulder
blades, back to the center of
chest. Tape should be level
and laid flat, held neither too
tight, nor too loose. The point
where the tape meets the 0”
mark, (in the center front of
the chest), is your
measurement.
INSEAM: Use a pair of pants
that fit you well (they
should not be too loose around
the waist). Measure the inseam
of the pants by positioning the
tape’s 0” mark on the center
seam of the crotch, down the
inside leg seam, to the hem.
The point where the tape
meets the hem is the inseam
length.
INSEAM LENGTHS
Length of Garment
Coverall Inseam
Measurement
Regular
30”
Tall
32”
WAIST: Place 0” mark of the
tape measure in the center of
your natural waist. Tape should
wrap around the back to the
front center of waist. Tape
should be level and laid flat,
held neither too tight, nor
too loose. Do not suck in
your stomach or you will get
a false measurement. The
point where the tape meets
the 0” mark is your waist
measurement.
NOTE: When taking these measurements, use a cloth tape measure, not a metal one.
Helpful Hint: If you plan to wear clothing, in addition to undergarments,
beneath your insulateds, choose a larger size to accomodate
the extra garments.
LAPCO FR™ | 25 | 2016 CATALOG
LAPCO FR™ | 26 | 2016 CATALOG
LAPCO FR™ | 27 | 2016 CATALOG
WELDING CAPS SIZING
• To find your welding cap size, measure the circumference of your head.
MEASURING TIPS
Things you will need:
1) Cloth measuring tape OR 2) Standard measuring tape and a piece of string.
How to measure:
1. Hold the end of the cloth tape measure to the middle
of your forehead. If you are using a standard metallic
tape measure, use a piece of string.
2. Wrap the tape or string around your head until you
return to the starting point. It should be above your
ears, resting at the point you would like your hat to rest.
3. Make sure the tape measure or string is snug around
your head, but not too tight. It should be comfortable,
and just fitted enough to stay put.
4. Jot down your measurement in inches. If you used string,
measure the string against your tape measure.
5. Use the size chart at right, to determine which size will be
your best fit. If you are between sizes, choose the larger size.
CAP SIZE
HEAD
MEASUREMENT
6 3/4
21 1/8”
6 7/8
21 1/2”
7
21 7/8”
7 1/8
22 1/4”
7 1/4
22 5/8”
7 3/8
23”
7 1/2
23 1/2”
7 5/8
23 7/8”
7 3/4
24 1/4”
7 7/8
24 5/8”
8
25”
Welding Cap Crown Measurements
4-Panel Caps-High Crown
7”
6-Panel Caps-Low Crown
6”
To measure for crown size :
1. Measure from the crown of the head (highest peak)
to the location where you like the bottom of the band.
2. If you have an existing hat that fits fine, lay it down,
flat on it’s side. Measure the distance from the top of
the crown to the bottom of the band.
LAPCO FR™ | 28 | 2016 CATALOG
CUSTOMIZATION SERVICES
Save time with
Factory-Direct
Customization!
EMBROIDERY
PATCHES & EMBLEMS
REFLECTIVE TRIM
LAPCO FR™ | 29 | 2016 CATALOG
Custom Embroidered Logos & Designs
Begin with High-Quality Digitizing
LOGO LIMITATIONS: Embroidery is NOT printing, if your artwork includes shadows, gradients or
shading, we will have to discuss how to adapt the design to embroidery capabilities. We have
some tricks, but there are limits on what can be duplicated with needle and thread. We cannot
duplicate gradients within small individual letters, numbers, or other small objects. Gradient effects
can be reproduced only within larger objects or shapes. Thread layering and overstitching are used
to produce a gradient look. Although this achieves a similar effect, it adds considerable stitching to
the digitized design.
LAPCO FR™ | 30 | 2016 CATALOG
Customization with Patches and Emblems
LAPCO FR™ | 31 | 2016 CATALOG
LAUNDERING INSTRUCTIONS
Home Laundering
LAPCO FR clothing-made with Carolina Protect FR fabric-can be washed, dried, and ironed
if necessary. Conventional home washing methods will not alter the flame-resistant properties
of the fabric, when employed correctly. It is important that the garments be free of stains that
could be flammable. If stains cannot be removed at home, washing periodically at a commercial
laundromat is recommended. Difficult or profound stains wash out more easily if they are prewashed. The stain should be rubbed with liquid detergent or another product specified for prewashing. The pre-wash should sit long enough to penetrate the stain and loosen the soil. Do not
use any pre-wash product containing bleach or hydrogen peroxide. These chemicals will alter
the flame-resistance of the fabric and consequently, the garment.
Detergents and Other Washing Products
It is important to use an effective detergent that does not contain softener, bleach, or hydrogen
peroxide. There are a variety of fabric softeners and starches on the market, but some of these
will affect the flame-resistance of the fabric; therefore, it is not recommended to use these
products on your flame-resistant garments. Another issue to consider is water quality. Hard water
contains salts like calcium and magnesium. These minerals can deposit layers of buildup on the
fabric that are difficult to remove and can decrease the flame-resistance of the garments over time.
Soft water, on the contrary, can reduce the consumption of detergent, improve wash quality, and
will not affect the flame-resistant properties of your garments. The use of soaps is not recommended.
Soaps can form an insoluble film on your garments, and can be flammable.
Washing/Drying Guide
Garments should be separated into light colors and dark colors to avoid color transfer between
garments. When washing your garments, it is important not to overload the machine. This will
ensure an optimum wash and avoid wrinkles. The load size should allow garments to move
freely during the wash and rinse cycles. The water temperature should be set to “hot” when
washing heavily soiled garments. Less soiled garments should be washed on a lower temperature
setting to extend the color retention of the fabric. Your flame-resistant garments can be washed at
a temperature of up to 167°F. Your garments can be machine or line dried. When machine drying,
garments should be removed from the machine immediately when they have dried or while still
slightly damp. Over drying can result in excessive shrinkage. Drying times vary depending on the
load size. Steaming or common ironing can be used with your flame-resistant garments. Ironing,
without the use of starch, will not have a negative effect on the garments flame-resistant properties.
Dry cleaning is effective at removing grease and oils that are difficult to remove using conventional
laundering techniques. Dry cleaning is not recommended for our denim garments, due to possible
discoloration.
IMPORTANT
Bleach, Hydrogen Peroxide, or products containing either, should NEVER be used
on flame-resistant garments.
LAPCO FR™ | 32 | 2016 CATALOG
INDUSTRY TERMS | QUICK REFERENCE
NFPA: acronym for the National Fire Protection Association.
OSHA: acronym for the 0ccupational Safety and Health Administration,of the US Department of Labor.
ANSI: acronym for the American National Standards Institute.
CGSB: acronym for the Canadian General Standards Board.
ASTM: shortened from ASTM International, formerly known as the American Society for Testing and Materials.
NFPA 70E: Standard for Electrical Safety in the Workplace.
NFPA 2112: Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire.
NFPA 2113: Standard on Selection, Care, Use, and Maintenance of Flame-Resistant Garments for Protection
of Industrial Personnel Against Flash Fire.
CAN/CGSB 155.20-2000: Standard on Workwear for Protection Against Hydrocarbon Flash Fire.
ASTM F1506: Standard Performance Specification for Flame Resistant and Arc Rated Textile Materials for
Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards.
Primary Protective Clothing: Clothing designed for activities where significant exposure to molten substance
splash, radiant heat, or flame is likely to occur.
Secondary Protective Clothing: Protective clothing designed for continuous wear in designated locations
where intermittent exposure is possible.
PPE: (Personal Protective Equipment) is equipment worn to minimize exposure to a variety of hazards.
Flame Resistant: The characteristic of a fabric to resist ignition and to self extinguish if ignited.
Flame Retardant: A chemical substance used to impart flame resistance.
ATPV: (Arc Thermal Performance Value) is expressed in cal/cm2, and represents the thermal exposure
from an electric arc on a material that is predicted to cause a second-degree burn in human tissue.
HRC: (Hazard Risk Category) is the level of risk exposure of a specific job or task.
Treated Flame-Resistant Fabrics: the flame-resistant characteristic is achieved through special treatments
applied to the fiber or fabric.
Inherently Flame-Resistant Fabrics: Flame resistance is a built in characteristic of the fiber, no treatment is
needed.
Arc Blast: is an explosive release of molten material from equipment caused by high-amperage arcs.
Arc Flash Hazard: is a dangerous condition associated with the possible release of energy caused by an
electric arc.
Flash Fire
A flash fire is defined by CGSB 155.20-2000 and NFPA 2113 as:
“A rapidly moving flame front which can be a combustion explosion. Flash fire may occur in an environment
where fuel and air become mixed in adequate concentrations to combust...flash fire has a heat flux of
approximately 84 kW/m2 for relatively short periods of time, typically less than 3 seconds.”
LAPCO FR™ | 33 | 2016 CATALOG
QGWB.MH49608
Protective Clothing for Protection of Industrial Personnel Against Flash Fire
Page Bottom
Protective Clothing for Protection of Industrial Personnel Against Flash Fire
See General Information for Protective Clothing for Protection of Industrial Personnel Against Flash Fire
LAPCO MFG INC
MH49608
98 Glenwood St
Morgan City, LA 70380­2317 USA
Protective clothing for protection of industrial personnel against flash fire in accordance with ANSI/NFPA 2112­2012 in the following styles or
models:
Bib overalls, Model B13FRDNXX.
Coveralls, Models GOCAC7XXX, NXCD45, NXCE45XX.
Models CVEFR7, CVFRDYYXX, CVFR9XXX, GOC6XXXX, CVIN9XX, GOCD7, GOCLW6XX.
Insulated bib overalls, Model BIFRXXXX.
Insulated coat/jacket, Models JLFRXXXX, JTFRXXXX, JUFR7XX, PKFRXXXX.
Insulated coverall, Model CIFRXXXX.
Pants, Models P­INDMXX, L­PFRDXXM, L­PFRDXXC, L­PFRACXX.
Models P­INDXX, P­INXACXX, P­INDC, P­INK, P­XXX7, P­XXXAC, P­INCXX.
Shirts, Models FRT­HJE­XXX, FRT­USHLS­XXX, FRT­USHSS­XXX, GOSAC7XXX, GOSACXXXX, NXS45XX, L­SFRACXX, IBW7.
Model IXXX7S.
Sweatshirts, Model SWHFR14XX.
Models GOSLW6XX, GOS7, INXWS.
Note: "X", "XX", "XXX" and "XXXX" can represent any combination of letters or numbers that are used to indicate the color of the garment.
'YY' represents and combination of numbers or letters in the model number utilized to indicate fabric weight. Model numbers may include a
suffix that is used to indicate use of Optional Construction Features.
Last Updated on 2015­07­14
Questions?
Print this page
Terms of Use
Page Top
© 2015 UL LLC
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow­Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow­Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non­
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory
with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in
the following format: "© 2015 UL LLC".
LAPCO FR™ | 34 | 2016 CATALOG
QGVZ.MH49608
Protective Clothing for Electrical Workers
Page Bottom
Protective Clothing for Electrical Workers
See General Information for Protective Clothing for Electrical Workers
LAPCO MFG INC
MH49608
98 Glenwood St
Morgan City, LA 70380­2317 USA
Protective clothing for electrical workers Classified in accordance with ASTM F1506­2010a.
Bib overalls, Model B13FRDNXX.
Coveralls, Models CVEFR7, CVFRDYYXX, CVFR9XXX, CVIN9NXX, GOCD7, GOCLW6XX, GOC6XXXX, GOCAC7XXX.
Pants, Models P­INDXX, P­INDMXX, P­INXACXX, P­INDC, P­INK, P­XXX7, P­INCXX, P­XXXAC, L­PFRACXX, L­PFRDXXC, L­PFRDXXM.
Shirt, Models GOS7, GOSLW6XX, GOSACXXXX, GOSAC7XXX, INXWSX, IXX7, IXX7WS, IBW7, IXXX7S, L­SFRACXX.
Note:
"X", "XX", "XXX" and "XXXX" can represent any combination of letters or numbers that are used to indicate the color of the garment. 'YY'
represents and combination of numbers or letters in the model number utilized to indicate fabric weight. Model numbers may include a suffix
that is used to indicate use of Optional Construction Features.
Last Updated on 2015­10­09
Questions?
Print this page
Terms of Use
Page Top
© 2015 UL LLC
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow­Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow­Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non­
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory
with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in
the following format: "© 2015 UL LLC".
LAPCO FR™ | 35 | 2016 CATALOG