VEGA14 LED
RECESSED
W W W . L U M E N W E R X . C O M
DESCRIPTION
Vega is an efficient architectural
PROJECT: __________________________________
LED troffer with a distinctive luminous shielding
____________________________________________
that features a median textured optic. Using
TYPE: ______________________________________
advanced LED engines, Vega provides highly
NOTES: ____________________________________
efficient illumination and offers comprehensive
____________________________________________
ceiling, electrical, and controls options in 2x2, 1x4,
and 2x4 sizes. See separate spec sheets for other
available mountings.
Grid - shown with MTO and HLO optics
Drywall - shown with MTO and HLO optics
ORDER GUIDE
VEG
14
MTO
HLO
LUMINAIRE ID
SIZE
CENTER OPTICS
SIDE OPTICS
LIGHT SOURCE
CRI
LUMEN PACKAGES
COLOR TEMP.
VEG - vega
14 - 1'x4'
MTO - Median Textured
HLO - High-Efficiency
LED - high performance LED
80 - 80CRI
2300 - low output 2300lm
30 - 3000k
Optic
Lambertian Optic
T5/T5HO - 1 to 3 T5/T5HO lamps (consult factory)
90 - 90CRI (consult factory)
3200 - medium output 3200lm
35 - 3500k
4200 - high output 4200lm
40 - 4000k
T8 - 1 to 2 T8 lamps (consult factory)
VOLTAGE
DRIVER
ELECTRICAL
MOUNTING
FINISH
CONTORLS
OPTIONS
120 - 120V
D - dimming 0-10V
1 - 1 circuit
TG9 - tegular 9/16"
W - matte white
ONBOARD
FU - fuse
277 - 277V
DA - Dali
+EB - emergency battery pack
TG15 - tegular 15/16"
CF# - custom finish specify RAL#
OMS - Motion Sensor & power pack
FWC - flexible whip cable (6' std)
UNV - 120V-277V
LHL# - Lutron Hi-Lume A
+EM - emergency light circuit
TB9 - t-bar 9/16"
ODS - Daylight Sensor & controller
CP - Chicago Plenum
347 - 347V
LEH - Lutron EcoSystem H
+NL - night light circuit
TB15 - t-bar 15/16"
WIRELESS
CU - custom
LE5 - Lutron EcoSystem 5
+GTD - generator transfer device
ST - screw slot t-bar
EWC - EnOcean Wireless Controller
OTH - other (consult factory)
+M - master (consult factory)
DF - drywall kit
LMC - Lutron Motion Controller
LDC - Daylight Controller
+S - satellite (consult factory)
See page 2 for ordering code detailed information
CROSS SECTION
OPTICS
11"
4"
4"
1 3/4"
11 7/8" with flanges
12" between T-bars
13 3/8" Mounting kit
TB9 - t-bar 9/16"
DF - drywall kit
HLO Side optics - High-Efficiency Lambertian
MTO Center optics - Median Textured Optic
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862- © All right are reserved to LumenWerx ULC.
File Name: VEGA14.RECESSED.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 1 / 3
VEGA14 LED
RECESSED
W W W . L U M E N W E R X . C O M
OPTICS
MOUNTING OPTIONS
CENTER LENS - MEDIAN TEXTURED OPTIC (MTO) - Median Textured Optic (MTO) shielding
Recess mount into exposed or concealed T-Bar or Tegular grid ceiling
consisting of ribbed diffusing center element.
SIDE LENS - HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - Curved sides of diffusing 0.075"
thick acrylic with 90% transmission and good source obscuration. Luminaire brightness is
controlled by the flux-to-shielding area ratio in addition to offering a gentle gradient from center to
edge.
LIGHT SOURCE - LED
TG9 - tegular 9/16"
TG15 - tegular 15/16"
TB15 - t-bar 15/16"
ST - screw slot t-bar
TB9 - t-bar 9/16"
Custom linear array of mid-flux LED's are cartridge-mounted with quick-connect wiring to facilitate
service and thermal management. Available in 3000K, 3500K and 4000K with a minimum 80 CRI
and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM.
LEDs operated at reduced drive current to optimize efficacy and lumen maintenance.
All LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80
lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and
presented in accordance with IESNA LM-79, unless otherwise indicated.
LED output
Color Temp
Watts
Nominal Lumens
Efficacy
A separate kit for mounting fixtures into drywall ceilings
49 3/8"
Drywall kit flange to flange
48 25/32"
Drywall hole
Lumens Per Watt
low output
4000K
23
2300
99
medium output
4000K
33
3200
98
high output
4000K
43
4200
98
13 3/8"
12
Drywall kit 25/32"
flange to Drywall
flange
hole
ELECTRICAL
Power
Factory-set adjustable output current electronic driver with 120-277V AC line input. Dimmable
from at least 100%-5% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC
max. ambient (and 70ºC max. case) temperature. Terminal block connections for easy service.
At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include
Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5
(100%-5%) dimmable drivers and DALI protocol drivers.
DF - drywall kit
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and
charge indicator, minimum of 90 minutes operation, up to 1300 lumens (25ºC) emergency lighting
output. Recharge time of 24 hours.
FINISH
Interior reflectors - 95% reflective, matte white powder coating
Exterior - matte white powder coating.
Custom finish is also available.
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862- © All right are reserved to LumenWerx ULC.
File Name: VEGA14.RECESSED.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 2 / 3
VEGA14 LED
RECESSED
W W W . L U M E N W E R X . C O M
CONTROLS
WEIGHT
LumenWerx offers several options for integrating motion and daylight controls into Vega
17.18lbs.+3.08 lbs. (drywall kit) - 7.8kg+1.4kg (drywall kit)
luminaires. Wireless options incorporate a wireless controller/powerpack into the luminaire,
which receives signals from a wireless sensor (by others) installed in the space. The advantages
CERTIFICATIONS
of the wireless option include greater flexibility of control options, sensor coverage, and system
ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to
integration. Onboard options incorporate both the sensor and controller/powerpack. Onboard
CAN/CSA Standard C22.2 No. 250.0.
sensors, while inherently simpler, have limitations of control and coverage.
Chicago plenum - City of Chicago Approved (CCEA)
Onboard
Onboard Motion Sensor and power pack (OMS) provide automatic on and automatic off control,
WARRANTY
using PIR detection. Sensor is designed to detect fine-motion when installed within 6' of occupants.
LumenWerx provides a five-year limited warranty of electrical and mechanical
Onboard Daylight Sensor and controller (ODS) provide input for 0-10V dimming drivers. Separate
performance of the luminaires, including the LED boards, drivers, and auxiliary
switched control of line input is required for on/off control.
electronics. LumenWerx will repair or replace defective luminaires or components at
our discretion, provided they have been installed and operated in accordance with our
specifications. Other limitations apply, please refer to the full warranty on our website.
1 1/2"
Location of an Onboard sensor
Wireless
EnOcean Wireless Controller (EWC) provides both a power pack for presence detection control
and a 0-10V interface for daylight harvesting. EnOcean wireless sensors (by others) mounted in the
room signal the onboard EWC. This option permits manual on/automatic off (vacancy) control.
Lutron Motion Controller (LMC) and Daylight Controller (LDC) provide inputs to Ecosystem
drivers. Compatible Lutron wireless motion and daylight sensors (by others) mounted in the room
signal onboard LPC or LDC. This option permits manual on/automatic off (vacancy) control.
CONSTRUCTION
Housing - Die formed cold rolled sheet steel 20 gauge thick, matte white powder coating.
Reflectors - Cold rolled steel 0.030" thick precisely die formed, 95% reflective matte white painted.
Interior brackets - Die formed cold rolled sheet steel 20 gauge thick.
Center basket - Extruded Aluminum 0.07" nominal, matte white and lens made in clear PMMA
precisely formed into optical micro-structures forms.
Side lenses - Frost impact acrylic lens 88% transmissive.
Drywall kit - Extruded Aluminum 0.07" nominal, matte white powder coating.
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862- © All right are reserved to LumenWerx ULC.
File Name: VEGA14.RECESSED.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 3 / 3
VEGA14 LED
SURFACE
W W W . L U M E N W E R X . C O M
DESCRIPTION
Vega is an efficient architectural LED troffer with a
PROJECT: __________________________________
distinctive luminous shielding that features a median
____________________________________________
textured optic. Using advanced LED engines, Vega
TYPE: ______________________________________
provides highly efficient illumination and offers
NOTES: ____________________________________
comprehensive ceiling, electrical, and controls options in
____________________________________________
2x2, 1x4, and 2x4 sizes. See separate spec sheets for other
available mountings.
Shown with MTO and HLO optics
ORDER GUIDE
VEG
14
MTO
HLO
LUMINAIRE ID
SIZE
CENTER OPTICS
SIDE OPTICS
LIGHT SOURCE
CRI
LUMEN PACKAGES
COLOR TEMP.
VEG - vega
14 - 1'x4'
MTO - Median Textured
HLO - High-Efficiency
LED - high performance LED
80 - 80CRI
2300 - low output 2300lm
30 - 3000k
Optic
Lambertian Optic
T5/T5HO - 1 to 3 T5/T5HO lamps (consult factory)
90 - 90CRI (consult factory)
3200 - medium output 3200lm
35 - 3500k
4200 - high output 4200lm
40 - 4000k
T8 - 1 to 2 T8 lamps (consult factory)
SUR
VOLTAGE
DRIVER
ELECTRICAL
MOUNTING
FINISH
CONTROLS
OPTIONS
120 - 120V
D - dimming 0-10V
1 - 1 circuit
SUR - surface mount kit
W - matte white
ONBOARD
FU - fuse
277 - 277V
DA - Dali
+EB - emergency battery pack
CF# - custom finish specify RAL#
OMS - Motion Sensor & power pack
CU - custom
UNV - 120V-277V
LHL# - Lutron Hi-Lume A
+EM - emergency light circuit
ODS - Daylight Sensor & controller
347 - 347V
LEH - Lutron EcoSystem H
+NL - night light circuit
WIRELESS
LE5 - Lutron EcoSystem 5
+GTD - generator transfer device
EWC - EnOcean Wireless Controller
OTH - other (consult factory)
+M - master (consult factory)
LMC - Lutron Motion Controller
+S - satellite (consult factory)
LDC - Daylight Controller
See page 2 for ordering code detailed information
OPTICS
CROSS SECTION
4 1/4"
13 3/8" Mounting kit
SUR - surface mount kit
HLO Side optics - High-Efficiency Lambertian
MTO Center optics - Median Textured Optic
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA14.SURFACE.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 1 / 3
VEGA14 LED
SURFACE
W W W . L U M E N W E R X . C O M
OPTICS
MOUNTING OPTIONS
CENTER LENS - MEDIAN TEXTURED OPTIC (MTO) - Median Textured Optic (MTO) shielding
A separate kit for mounting fixtures directly to the ceiling surface. Kit is compatible
consisting of ribbed diffusing center element.
with T-Bar, hard surface and drywall ceilings.
49 11/32"
Surface kit
32"
Ceiling holes
SIDE LENS - HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - Curved sides of diffusing 0.075"
thick acrylic with 90% transmission and good source obscuration. Luminaire brightness is
controlled by the flux-to-shielding area ratio in addition to offering a gentle gradient from center to
edge.
8"
Ceiling
holes
13 11/32"
Surface
kit
LIGHT SOURCE - LED
Custom linear array of mid-flux LED's are cartridge-mounted with quick-connect wiring to facilitate
Power
service and thermal management. Available in 3000K, 3500K and 4000K with a minimum 80 CRI
and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM.
LEDs operated at reduced drive current to optimize efficacy and lumen maintenance.
All LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80
lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and
presented in accordance with IESNA LM-79, unless otherwise indicated.
LED output
Color Temp
Watts
Nominal Lumens
Efficacy
SUR - surface mount kit
Lumens Per Watt
low output
4000K
23
2300
99
medium output
4000K
33
3200
98
Interior reflectors - 95% reflective, matte white powder coating
high output
4000K
43
4200
98
Exterior - matte white powder coating.
FINISH
Custom finish is also available.
ELECTRICAL
Factory-set adjustable output current electronic driver with 120-277V AC line input. Dimmable
from at least 100%-5% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC
max. ambient (and 70ºC max. case) temperature. Terminal block connections for easy service.
At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include
Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5
(100%-5%) dimmable drivers and DALI protocol drivers.
CONTROLS
LumenWerx offers several options for integrating motion and daylight controls into
Vega luminaires. Wireless options incorporate a wireless controller/powerpack into
the luminaire, which receives signals from a wireless sensor (by others) installed in
the space. The advantages of the wireless option include greater flexibility of control
options, sensor coverage, and system integration. Onboard options incorporate both
the sensor and controller/powerpack. Onboard sensors, while inherently simpler,
have limitations of control and coverage.
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and
charge indicator, minimum of 90 minutes operation, up to 1300 lumens (25ºC) emergency lighting
output. Recharge time of 24 hours.
Onboard
Onboard Motion Sensor and power pack (OMS) provide automatic on and
automatic off control, using PIR detection. Sensor is designed to detect fine-motion
when installed within 6' of occupants.
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA14.SURFACE.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 2 / 3
VEGA14 LED
SURFACE
W W W . L U M E N W E R X . C O M
Onboard Daylight Sensor and controller (ODS) provide input for 0-10V dimming drivers. Separate
WARRANTY
switched control of line input is required for on/off control.
LumenWerx provides a five-year limited warranty of electrical and mechanical
performance of the luminaires, including the LED boards, drivers, and auxiliary
electronics. LumenWerx will repair or replace defective luminaires or components at
our discretion, provided they have been installed and operated in accordance with our
specifications. Other limitations apply, please refer to the full warranty on our website.
1 1/2"
Location of an Onboard sensor
Wireless
EnOcean Wireless Controller (EWC) provides both a power pack for presence detection control
and a 0-10V interface for daylight harvesting. EnOcean wireless sensors (by others) mounted in the
room signal the onboard EWC. This option permits manual on/automatic off (vacancy) control.
Lutron Motion Controller (LMC) and Daylight Controller (LDC) provide inputs to Ecosystem
drivers. Compatible Lutron wireless motion and daylight sensors (by others) mounted in the room
signal onboard LPC or LDC. This option permits manual on/automatic off (vacancy) control.
CONSTRUCTION
Housing - Die formed cold rolled sheet steel 20 gauge thick, matte white powder coating.
Reflectors - Cold rolled steel 0.030" thick precisely die formed, 95% reflective matte white painted.
Interior brackets - Die formed cold rolled sheet steel 20 gauge thick.
Center basket - Extruded Aluminum 0.07" nominal, matte white and lens made in clear PMMA
precisely formed into optical micro-structures forms.
Side lenses - Frost impact acrylic lens 88% transmissive.
Surface kit - Extruded Aluminum 0.07" nominal, matte white or silver powder coating. Custom
finishes are also available.
WEIGHT
17.18lbs.+6.94 lbs. - 7.8kg+3.15kg
CERTIFICATIONS
ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA
Standard C22.2 No. 250.0.
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA14.SURFACE.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 3 / 3
VEGA22 LED
RECESSED
W W W . L U M E N W E R X . C O M
DESCRIPTION
Vega is an efficient architectural
PROJECT: __________________________________
LED troffer with a distinctive luminous shielding
____________________________________________
that features a median textured optic. Using
TYPE: ______________________________________
advanced LED engines, Vega provides highly
NOTES: ____________________________________
efficient illumination and offers comprehensive
____________________________________________
ceiling, electrical, and controls options in 2x2, 1x4,
and 2x4 sizes. See separate spec sheets for other
available mountings.
Grid - shown with MTO and HLO optics
Drywall - shown with MTO and HLO optics
up to 115 lm/w performance
ORDER GUIDE
VEG
22
MTO
HLO
LUMINAIRE ID
SIZE
CENTER OPTICS
SIDE OPTICS
LIGHT SOURCE
CRI
LUMEN PACKAGES
COLOR TEMP.
VEG - vega
22 - 2'x2'
MTO - Median Textured
HLO - High-Efficiency
LED - high performance LED
80 - 80CRI
2300 - low output 2300lm
30 - 3000k
Optic
Lambertian Optic
T5/T5HO - 1 to 3 T5/T5HO lamps (consult factory)
90 - 90CRI (consult factory)
3200 - medium output 3200lm
35 - 3500k
4200 - high output 4200lm
40 - 4000k
T8 - 1 to 3 T8 lamp (consult factory)
VOLTAGE
DRIVER
ELECTRICAL
MOUNTING
FINISH
CONTROLS
OPTIONS
120 - 120V
D - dimming 0-10V
1 - 1 circuit
TG9 - tegular 9/16"
W - matte white
ONBOARD
FU - fuse
277 - 277V
DA - Dali
+EB - emergency battery pack
TG15 - tegular 15/16"
CF# - custom finish specify RAL#
OMS - Motion Sensor & power pack
FWC - flexible whip cable (6' std)
UNV - 120V-277V
LHL# - Lutron Hi-Lume A
+EM - emergency light circuit
TB9 - t-bar 9/16"
ODS - Daylight Sensor & controller
AR - air return (for grid only)
347 - 347V
LEH - Lutron EcoSystem H
+NL - night light circuit
TB15 - t-bar 15/16"
WIRELESS
CP - Chicago Plenum
LE5 - Lutron EcoSystem 5
+GTD - generator transfer device
ST - screw slot t-bar
EWC - EnOcean Wireless Controller
CU - custom
OTH - other (consult factory)
+M - master (consult factory)
DF - drywall kit
LMC - Lutron Motion Controller
LDC - Daylight Controller
+S - satellite (consult factory)
See page 2 for ordering code detailed information
CROSS SECTION
OPTICS
23"
4"
4"
1 3/4"
23 7/8" with flanges
24" between T-bars
25 3/8" Mounting kit
TB9 - t-bar 9/16"
DF - drywall kit
HLO Side optics - High-Efficiency Lambertian
MTO Center optics - Median Textured Optic
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA22.RECESSED.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 1 / 3
VEGA22 LED
RECESSED
W W W . L U M E N W E R X . C O M
OPTICS
MOUNTING OPTIONS
CENTER LENS - MEDIAN TEXTURED OPTIC (MTO) - Median Textured Optic (MTO) shielding
Recess mount into exposed or concealed T-Bar or Tegular grid ceiling
consisting of ribbed diffusing center element.
SIDE LENS - HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - Curved sides of diffusing 0.075"
thick acrylic with 90% transmission and good source obscuration. Luminaire brightness is
controlled by the flux-to-shielding area ratio in addition to offering a gentle gradient from center to
edge.
LIGHT SOURCE - LED
TG9 - tegular 9/16"
TG15 - tegular 15/16"
TB15 - t-bar 15/16"
ST - screw slot t-bar
TB9 - t-bar 9/16"
Custom linear array of mid-flux LED's are cartridge-mounted with quick-connect wiring to facilitate
service and thermal management. Available in 3000K, 3500K and 4000K with a minimum 80 CRI
and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM.
LEDs operated at reduced drive current to optimize efficacy and lumen maintenance.
All LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80
lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and
presented in accordance with IESNA LM-79, unless otherwise indicated.
LED output
Color Temp
Watts
Nominal Lumens
Efficacy
A separate kit for mounting fixtures into drywall ceilings
24 25/32"
Drywall hole
Lumens Per Watt
low output
4000K
20
2300
115
medium output
4000K
29
3200
110
high output
4000K
40
4200
104
25 3/8"
24
Drywall kit 25/32"
flange to Drywall
flange
hole
ELECTRICAL
Factory-set adjustable output current electronic driver with 120-277V AC line input. Dimmable
from at least 100%-5% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC
max. ambient (and 70ºC max. case) temperature. Terminal block connections for easy service.
Power
At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include
DF - drywall kit
Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5
(100%-5%) dimmable drivers and DALI protocol drivers.
FINISH
Interior reflectors - 95% reflective, matte white powder coating
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and
charge indicator, minimum of 90 minutes operation, up to 1300 lumens (25ºC) emergency lighting
Exterior - matte white powder coating.
Custom finish is also available.
output. Recharge time of 24 hours.
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA22.RECESSED.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 2 / 3
VEGA22 LED
RECESSED
W W W . L U M E N W E R X . C O M
CONTROLS
CONSTRUCTION
LumenWerx offers several options for integrating motion and daylight controls into Vega
Housing - Die formed cold rolled sheet steel 20 gauge thick, matte white powder
luminaires. Wireless options incorporate a wireless controller/powerpack into the luminaire,
coating.
which receives signals from a wireless sensor (by others) installed in the space. The advantages
Reflectors - Cold rolled steel 0.030" thick precisely die formed, 95% reflective matte
of the wireless option include greater flexibility of control options, sensor coverage, and system
white painted.
integration. Onboard options incorporate both the sensor and controller/powerpack. Onboard
Interior brackets - Die formed cold rolled sheet steel 20 gauge thick.
sensors, while inherently simpler, have limitations of control and coverage.
Center basket - Extruded Aluminum 0.07" nominal, matte white and lens made in
Onboard
clear PMMA precisely formed into optical micro-structures forms.
Side lenses - Frost impact acrylic lens 88% transmissive.
Onboard Motion Sensor and power pack (OMS)
Drywall kit - Extruded Aluminum 0.07" nominal, matte white powder coating.
provide automatic on and automatic off control,
using PIR detection. Sensor is designed to detect
fine-motion when installed within 6' of occupants.
WEIGHT
Onboard Daylight Sensor and controller (ODS)
16.08lbs.+2.51lbs. (drywall kit) - 7.3kg+1.14kg (drywall kit)
provide input for 0-10V dimming drivers. Separate
CERTIFICATIONS
switched control of line input is required for on/off
control.
ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to
1 1/2"
CAN/CSA Standard C22.2 No. 250.0.
Location of an Onboard sensor
Chicago plenum - City of Chicago Approved (CCEA)
Wireless
EnOcean Wireless Controller (EWC) provides both a power pack for presence detection control
WARRANTY
and a 0-10V interface for daylight harvesting. EnOcean wireless sensors (by others) mounted in the
LumenWerx provides a five-year limited warranty of electrical and mechanical
room signal the onboard EWC. This option permits manual on/automatic off (vacancy) control.
performance of the luminaires, including the LED boards, drivers, and auxiliary
Lutron Motion Controller (LMC) and Daylight Controller (LDC) provide inputs to Ecosystem
electronics. LumenWerx will repair or replace defective luminaires or components at
drivers. Compatible Lutron wireless motion and daylight sensors (by others) mounted in the room
our discretion, provided they have been installed and operated in accordance with our
signal onboard LPC or LDC. This option permits manual on/automatic off (vacancy) control.
specifications. Other limitations apply, please refer to the full warranty on our website.
OPTIONS
The air return option consists in a discreet,
yet efficient, slot pattern integrated into
the side flanges of the luminaire, allowing
the airflow to exhaust into plenum space,
creating a clean, pleasant look of the ceiling.
5/8"
Air Return
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA22.RECESSED.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 3 / 3
VEGA22 LED
SURFACE
W W W . L U M E N W E R X . C O M
DESCRIPTION
Vega is an efficient architectural LED troffer with a
PROJECT: __________________________________
distinctive luminous shielding that features a median
____________________________________________
textured optic. Using advanced LED engines, Vega
TYPE: ______________________________________
provides highly efficient illumination and offers
NOTES: ____________________________________
comprehensive ceiling, electrical, and controls options in
____________________________________________
2x2, 1x4, and 2x4 sizes. See separate spec sheets for other
available mountings.
up to 115 lm/w performance
Shown with MTO and HLO optics
ORDER GUIDE
VEG
22
MTO
HLO
LUMINAIRE ID
SIZE
CENTER OPTICS
SIDE OPTICS
LIGHT SOURCE
CRI
LUMEN PACKAGES
COLOR TEMP.
VEG - vega
22 - 2'x2'
MTO - Median Textured
HLO - High-Efficiency
LED - high performance LED
80 - 80CRI
2300 - low output 2300lm
30 - 3000k
Optic
Lambertian Optic
T5/T5HO - 1 to 3 T5/T5HO lamps (consult factory)
90 - 90CRI (consult factory)
3200 - medium output 3200lm
35 - 3500k
4200 - high output 4200lm
40 - 4000k
T8 - 1 to 3 T8 lamp (consult factory)
SUR
VOLTAGE
DRIVER
ELECTRICAL
MOUNTING
FINISH
CONTROLS
OPTIONS
120 - 120V
D - dimming 0-10V
1 - 1 circuit
SUR - surface mount kit
W - matte white
ONBOARD
FU - fuse
277 - 277V
DA - Dali
+EB - emergency battery pack
CF# - custom finish specify RAL#
OMS - Motion Sensor & power pack
CU - custom
UNV - 120V-277V
LHL# - Lutron Hi-Lume A
+EM - emergency light circuit
ODS - Daylight Sensor & controller
347 - 347V
LEH - Lutron EcoSystem H
+NL - night light circuit
WIRELESS
LE5 - Lutron EcoSystem 5
+GTD - generator transfer device
EWC - EnOcean Wireless Controller
OTH - other (consult factory)
+M - master (consult factory)
LMC - Lutron Motion Controller
+S - satellite (consult factory)
LDC - Daylight Controller
See page 2 for ordering code detailed information
OPTICS
CROSS SECTION
4 1/4"
25 3/8" Mounting kit
SUR - surface mount kit
HLO Side optics - High-Efficiency Lambertian
MTO Center optics - Median Textured Optic
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA22.SURFACE.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 1 / 3
VEGA22 LED
SURFACE
W W W . L U M E N W E R X . C O M
OPTICS
MOUNTING OPTIONS
CENTER LENS - MEDIAN TEXTURED OPTIC (MTO) - Median Textured Optic (MTO) shielding
A separate kit for mounting fixtures directly to the ceiling surface. Kit is compatible
consisting of ribbed diffusing center element.
with T-Bar, hard surface and drywall ceilings.
16"
Ceiling holes
SIDE LENS - HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - Curved sides of diffusing 0.075"
thick acrylic with 90% transmission and good source obscuration. Luminaire brightness is
controlled by the flux-to-shielding area ratio in addition to offering a gentle gradient from center to
edge.
16"
Ceiling
holes
LIGHT SOURCE - LED
25 11/32"
Surface
kit
Custom linear array of mid-flux LED's are cartridge-mounted with quick-connect wiring to facilitate
service and thermal management. Available in 3000K, 3500K and 4000K with a minimum 80 CRI
and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM.
Power
LEDs operated at reduced drive current to optimize efficacy and lumen maintenance.
SUR - surface mount kit
All LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80
lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and
presented in accordance with IESNA LM-79, unless otherwise indicated.
LED output
Color Temp
Watts
Nominal Lumens
Efficacy
Lumens Per Watt
low output
4000K
20
2300
115
medium output
4000K
29
3200
110
high output
4000K
40
4200
104
FINISH
Interior reflectors - 95% reflective, matte white powder coating
Exterior - matte white powder coating.
Custom finish is also available.
CONTROLS
LumenWerx offers several options for integrating motion and daylight controls into
Vega luminaires. Wireless options incorporate a wireless controller/powerpack into
the luminaire, which receives signals from a wireless sensor (by others) installed in
ELECTRICAL
the space. The advantages of the wireless option include greater flexibility of control
Factory-set adjustable output current electronic driver with 120-277V AC line input. Dimmable
options, sensor coverage, and system integration. Onboard options incorporate both
from at least 100%-5% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC
the sensor and controller/powerpack. Onboard sensors, while inherently simpler,
max. ambient (and 70ºC max. case) temperature. Terminal block connections for easy service.
have limitations of control and coverage.
At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include
Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5
(100%-5%) dimmable drivers and DALI protocol drivers.
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and
charge indicator, minimum of 90 minutes operation, up to 1300 lumens (25ºC) emergency lighting
output. Recharge time of 24 hours.
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA22.SURFACE.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 2 / 3
VEGA22 LED
SURFACE
W W W . L U M E N W E R X . C O M
WARRANTY
Onboard
LumenWerx provides a five-year limited warranty of electrical and mechanical
Onboard Motion Sensor and power pack (OMS)
performance of the luminaires, including the LED boards, drivers, and auxiliary
provide automatic on and automatic off control,
electronics. LumenWerx will repair or replace defective luminaires or components at
using PIR detection. Sensor is designed to detect
our discretion, provided they have been installed and operated in accordance with our
fine-motion when installed within 6' of occupants.
specifications. Other limitations apply, please refer to the full warranty on our website.
Onboard Daylight Sensor and controller (ODS)
provide input for 0-10V dimming drivers. Separate
switched control of line input is required for on/off
control.
1 1/2"
Location of an Onboard sensor
Wireless
EnOcean Wireless Controller (EWC) provides both a power pack for presence detection control
and a 0-10V interface for daylight harvesting. EnOcean wireless sensors (by others) mounted in the
room signal the onboard EWC. This option permits manual on/automatic off (vacancy) control.
Lutron Motion Controller (LMC) and Daylight Controller (LDC) provide inputs to Ecosystem
drivers. Compatible Lutron wireless motion and daylight sensors (by others) mounted in the room
signal onboard LPC or LDC. This option permits manual on/automatic off (vacancy) control.
CONSTRUCTION
Housing - Die formed cold rolled sheet steel 20 gauge thick, matte white powder coating.
Reflectors - Cold rolled steel 0.030" thick precisely die formed, 95% reflective matte white painted.
Interior brackets - Die formed cold rolled sheet steel 20 gauge thick.
Center basket - Extruded Aluminum 0.07" nominal, matte white and lens made in clear PMMA
precisely formed into optical micro-structures forms.
Side lenses - Frost impact acrylic lens 88% transmissive.
Surface kit - Extruded Aluminum 0.07" nominal, matte white or silver powder coating. Custom
finishes are also available.
WEIGHT
16.08lbs.+5.51lbs. - 7.3kg+2.5kg
CERTIFICATIONS
ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA
Standard C22.2 No. 250.0.
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA22.SURFACE.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 3 / 3
VEGA24 LED
RECESSED
W W W . L U M E N W E R X . C O M
DESCRIPTION
Vega is an efficient architectural
PROJECT: __________________________________
LED troffer with a distinctive luminous shielding
____________________________________________
that features a median textured optic. Using
TYPE: ______________________________________
advanced LED engines, Vega provides highly
NOTES: ____________________________________
efficient illumination and offers comprehensive
____________________________________________
ceiling, electrical, and controls options in 2x2, 1x4,
and 2x4 sizes. See separate spec sheets for other
available mountings.
Drywall - shown with MTO and HLO optics
Grid - shown with MTO and HLO optics
up to 105 lm/w performance
ORDER GUIDE
VEG
24
MTO
HLO
LUMINAIRE ID
SIZE
CENTER OPTICS
SIDE OPTICS
LIGHT SOURCE
CRI
LUMEN PACKAGES
COLOR TEMP.
VEG - vega
24 - 2'x4'
MTO - Median Textured
HLO - High-Efficiency
LED - high performance LED
80 - 80CRI
4000 - low output 4000lm
30 - 3000k
Optic
Lambertian Optic
T5/T5HO - 1 to 3 T5/T5HO lamps (consult factory)
90 - 90CRI (consult factory)
5500 - medium output 5500lm
35 - 3500k
6800 - high output 6800lm
40 - 4000k
T8 - 1 to 3 T8 lamp (consult factory)
VOLTAGE
DRIVER
ELECTRICAL
MOUNTING
FINISH
CONTROLS
OPTIONS
120 - 120V
D - dimming 0-10V
1 - 1 circuit
TG9 - tegular 9/16"
W - matte white
ONBOARD
FU - fuse
277 - 277V
DA - Dali
+EB - emergency battery pack
TG15 - tegular 15/16"
CF# - custom finish specify RAL#
OMS - Motion Sensor & power pack
FWC - flexible whip cable (6' std)
UNV - 120V-277V
LHL# - Lutron Hi-Lume A
+EM - emergency light circuit
TB9 - t-bar 9/16"
ODS - Daylight Sensor & controller
CP - Chicago Plenum
347 - 347V
LEH - Lutron EcoSystem H
+NL - night light circuit
TB15 - t-bar 15/16"
WIRELESS
CU - custom
LE5 - Lutron EcoSystem 5
+GTD - generator transfer device
ST - screw slot t-bar
EWC - EnOcean Wireless Controller
OTH - other (consult factory)
+M - master (consult factory)
DF - drywall kit
LMC - Lutron Motion Controller
LDC - Daylight Controller
+S - satellite (consult factory)
See page 2 for ordering code detailed information
CROSS SECTION
OPTICS
23"
4"
4"
1 3/4"
23 7/8" with flanges
24" between T-bars
25 3/8" Mounting kit
TB9 - t-bar 9/16"
DF - drywall kit
HLO Side optics - High-Efficiency Lambertian
MTO Center optics - Median Textured Optic
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA24.RECESSED.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 1 / 4
VEGA24 LED
RECESSED
W W W . L U M E N W E R X . C O M
OPTICS
MOUNTING OPTIONS
CENTER LENS - MEDIAN TEXTURED OPTIC (MTO) - Median Textured Optic (MTO) shielding
Recess mount into exposed or concealed T-Bar or Tegular grid ceiling
consisting of ribbed diffusing center element.
SIDE LENS - HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - Curved sides of diffusing 0.075"
thick acrylic with 90% transmission and good source obscuration. Luminaire brightness is
controlled by the flux-to-shielding area ratio in addition to offering a gentle gradient from center to
edge.
LIGHT SOURCE - LED
TG9 - tegular 9/16"
TG15 - tegular 15/16"
TB15 - t-bar 15/16"
ST - screw slot t-bar
TB9 - t-bar 9/16"
Custom linear array of mid-flux LED's are cartridge-mounted with quick-connect wiring to facilitate
service and thermal management. Available in 3000K, 3500K and 4000K with a minimum 80 CRI
and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM.
LEDs operated at reduced drive current to optimize efficacy and lumen maintenance.
All LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80
lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and
presented in accordance with IESNA LM-79, unless otherwise indicated.
LED output
Color Temp
Watts
Nominal Lumens
Efficacy
A separate kit for mounting fixtures into drywall ceilings
49 3/8"
Drywall kit flange to flange
48 25/32"
Drywall hole
Lumens Per Watt
low output
4000K
38
4000
105
medium output
4000K
55
5500
100
high output
4000K
68
6800
100
25 3/8"
24
Drywall kit 25/32"
flange to Drywall
flange
hole
ELECTRICAL
Factory-set adjustable output current electronic driver with 120-277V AC line input. Dimmable
from at least 100%-5% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC
max. ambient (and 70ºC max. case) temperature. Terminal block connections for easy service.
At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include
Power
Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5
(100%-5%) dimmable drivers and DALI protocol drivers.
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and
charge indicator, minimum of 90 minutes operation, up to 1300 lumens (25ºC) emergency lighting
output. Recharge time of 24 hours.
DF - drywall kit
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA24.RECESSED.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 2 / 4
VEGA24 LED
RECESSED
W W W . L U M E N W E R X . C O M
FINISH
OPTIONS
Interior reflectors - 95% reflective, matte white powder coating
The air return option consists in a discreet, yet efficient, slot pattern integrated into
Exterior - matte white powder coating.
the side flanges of the luminaire, allowing the airflow to exhaust into plenum space,
Custom finish is also available.
creating a clean, pleasant look of the ceiling.
CONTROLS
LumenWerx offers several options for integrating motion and daylight controls into Vega
luminaires. Wireless options incorporate a wireless controller/powerpack into the luminaire,
which receives signals from a wireless sensor (by others) installed in the space. The advantages
of the wireless option include greater flexibility of control options, sensor coverage, and system
integration. Onboard options incorporate both the sensor and controller/powerpack. Onboard
sensors, while inherently simpler, have limitations of control and coverage.
5/8"
Onboard
Onboard Motion Sensor and power pack
Air Return
(OMS) provide automatic on and automatic
off control, using PIR detection. Sensor is
CONSTRUCTION
designed to detect fine-motion when installed
Housing - Die formed cold rolled sheet steel 20 gauge thick, matte white powder
within 6' of occupants.
coating.
Onboard Daylight Sensor and controller
(ODS) provide input for 0-10V dimming
drivers. Separate switched control of line
input is required for on/off control.
Reflectors - Cold rolled steel 0.030" thick precisely die formed, 95% reflective matte
white painted.
1 1/2"
Location of an Onboard sensor
Interior brackets - Die formed cold rolled sheet steel 20 gauge thick.
Center basket - Extruded Aluminum 0.07" nominal, matte white and lens made in
Wireless
clear PMMA precisely formed into optical micro-structures forms.
EnOcean Wireless Controller (EWC) provides both a power pack for presence detection control
Side lenses - Frost impact acrylic lens 88% transmissive.
and a 0-10V interface for daylight harvesting. EnOcean wireless sensors (by others) mounted in the
Drywall kit - Extruded Aluminum 0.07" nominal, matte white powder coating.
room signal the onboard EWC. This option permits manual on/automatic off (vacancy) control.
Lutron Motion Controller (LMC) and Daylight Controller (LDC) provide inputs to Ecosystem
WEIGHT
drivers. Compatible Lutron wireless motion and daylight sensors (by others) mounted in the room
27.53 lbs.+3.74lbs. (drywall kit) - 12.5kg+1.7 kg (drywall kit)
signal onboard LPC or LDC. This option permits manual on/automatic off (vacancy) control.
CERTIFICATIONS
ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to
CAN/CSA Standard C22.2 No. 250.0.
Chicago plenum - City of Chicago Approved (CCEA)
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA24.RECESSED.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 3 / 4
VEGA24 LED
RECESSED
W W W . L U M E N W E R X . C O M
WARRANTY
LumenWerx provides a five-year limited warranty of electrical and mechanical performance of the
luminaires, including the LED boards, drivers, and auxiliary electronics. LumenWerx will repair or
replace defective luminaires or components at our discretion, provided they have been installed
and operated in accordance with our specifications. Other limitations apply, please refer to the full
warranty on our website.
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA24.RECESSED.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 4 / 4
VEGA24 LED
SURFACE
W W W . L U M E N W E R X . C O M
DESCRIPTION
Vega is an efficient architectural LED troffer with a
PROJECT: __________________________________
distinctive luminous shielding that features a median
____________________________________________
textured optic. Using advanced LED engines, Vega
TYPE: ______________________________________
provides highly efficient illumination and offers
NOTES: ____________________________________
comprehensive ceiling, electrical, and controls options in
____________________________________________
2x2, 1x4, and 2x4 sizes. See separate spec sheets for other
available mountings.
up to 105 lm/w performance
Shown with MTO and HLO optics
ORDER GUIDE
VEG
24
MTO
HLO
LUMINAIRE ID
SIZE
CENTER OPTICS
SIDE OPTICS
LIGHT SOURCE
CRI
LUMEN PACKAGES
COLOR TEMP.
VEG - vega
24 - 2'x4'
MTO - Median Textured
HLO - High-Efficiency
LED - high performance LED
80 - 80CRI
4000 - low output 4000lm
30 - 3000k
Optic
Lambertian Optic
T5/T5HO - 1 to 3 T5/T5HO lamps (consult factory)
90 - 90CRI (consult factory)
5500 - medium output 5500lm
35 - 3500k
6800 - high output 6800lm
40 - 4000k
T8 - 1 to 3 T8 lamp (consult factory)
SUR
VOLTAGE
DRIVER
ELECTRICAL
MOUNTING
FINISH
CONTROLS
OPTIONS
120 - 120V
D - dimming 0-10V
1 - 1 circuit
SUR - surface mount kit
W - matte white
ONBOARD
FU - fuse
277 - 277V
DA - Dali
+EB - emergency battery pack
CF# - custom finish specify RAL#
OMS - Motion Sensor & power pack
CU - custom
UNV - 120V-277V
LHL# - Lutron Hi-Lume A
+EM - emergency light circuit
ODS - Daylight Sensor & controller
347 - 347V
LEH - Lutron EcoSystem H
+NL - night light circuit
WIRELESS
LE5 - Lutron EcoSystem 5
+GTD - generator transfer device
EWC - EnOcean Wireless Controller
OTH - other (consult factory)
+M - master (consult factory)
LMC - Lutron Motion Controller
+S - satellite (consult factory)
LDC - Daylight Controller
See page 2 for ordering code detailed information
CROSS SECTION
OPTICS
4 1/4"
25 3/8" Mounting kit
SUR - surface mount kit
HLO Side optics - High-Efficiency Lambertian
MTO Center optics - Median Textured Optic
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA24.SURFACE.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 1 / 3
VEGA24 LED
SURFACE
W W W . L U M E N W E R X . C O M
OPTICS
MOUNTING OPTIONS
CENTER LENS - MEDIAN TEXTURED OPTIC (MTO) - Median Textured Optic (MTO) shielding
A separate kit for mounting fixtures directly to the ceiling surface. Kit is compatible
consisting of ribbed diffusing center element.
with T-Bar, hard surface and drywall ceilings.
49 11/32"
Surface kit
32"
Ceiling holes
SIDE LENS - HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - Curved sides of diffusing 0.075"
thick acrylic with 90% transmission and good source obscuration. Luminaire brightness is
controlled by the flux-to-shielding area ratio in addition to offering a gentle gradient from center to
edge.
25 11/32"
Surface
kit
16"
Ceiling
holes
LIGHT SOURCE - LED
Custom linear array of mid-flux LED's are cartridge-mounted with quick-connect wiring to facilitate
service and thermal management. Available in 3000K, 3500K and 4000K with a minimum 80 CRI
and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM.
LEDs operated at reduced drive current to optimize efficacy and lumen maintenance.
Power
All LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80
lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and
presented in accordance with IESNA LM-79, unless otherwise indicated.
LED output
Color Temp
Watts
Nominal Lumens
Efficacy
Lumens Per Watt
low output
4000K
38
4000
105
medium output
4000K
55
5500
100
high output
4000K
68
6800
100
SUR - surface mount kit
FINISH
Interior reflectors - 95% reflective, matte white powder coating
ELECTRICAL
Factory-set adjustable output current electronic driver with 120-277V AC line input. Dimmable
from at least 100%-5% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC
max. ambient (and 70ºC max. case) temperature. Terminal block connections for easy service.
At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include
Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5
(100%-5%) dimmable drivers and DALI protocol drivers.
Exterior - matte white powder coating.
Custom finish is also available.
CONTROLS
LumenWerx offers several options for integrating motion and daylight controls into
Vega luminaires. Wireless options incorporate a wireless controller/powerpack into
the luminaire, which receives signals from a wireless sensor (by others) installed in
the space. The advantages of the wireless option include greater flexibility of control
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and
charge indicator, minimum of 90 minutes operation, up to 1300 lumens (25ºC) emergency lighting
output. Recharge time of 24 hours.
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
options, sensor coverage, and system integration. Onboard options incorporate both
the sensor and controller/powerpack. Onboard sensors, while inherently simpler,
have limitations of control and coverage.
File Name: VEGA24.SURFACE.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 2 / 3
VEGA24 LED
SURFACE
W W W . L U M E N W E R X . C O M
WARRANTY
Onboard
LumenWerx provides a five-year limited warranty of electrical and mechanical
Onboard Motion Sensor and power pack
performance of the luminaires, including the LED boards, drivers, and auxiliary
(OMS) provide automatic on and automatic
electronics. LumenWerx will repair or replace defective luminaires or components at
off control, using PIR detection. Sensor is
our discretion, provided they have been installed and operated in accordance with our
designed to detect fine-motion when installed
specifications. Other limitations apply, please refer to the full warranty on our website.
within 6' of occupants.
Onboard Daylight Sensor and controller
(ODS) provide input for 0-10V dimming
drivers. Separate switched control of line
1 1/2"
Location of an Onboard sensor
input is required for on/off control.
Wireless
EnOcean Wireless Controller (EWC) provides both a power pack for presence detection control
and a 0-10V interface for daylight harvesting. EnOcean wireless sensors (by others) mounted in the
room signal the onboard EWC. This option permits manual on/automatic off (vacancy) control.
Lutron Motion Controller (LMC) and Daylight Controller (LDC) provide inputs to Ecosystem
drivers. Compatible Lutron wireless motion and daylight sensors (by others) mounted in the room
signal onboard LPC or LDC. This option permits manual on/automatic off (vacancy) control.
CONSTRUCTION
Housing - Die formed cold rolled sheet steel 20 gauge thick, matte white powder coating.
Reflectors - Cold rolled steel 0.030" thick precisely die formed, 95% reflective matte white painted.
Interior brackets - Die formed cold rolled sheet steel 20 gauge thick.
Center basket - Extruded Aluminum 0.07" nominal, matte white and lens made in clear PMMA
precisely formed into optical micro-structures forms.
Side lenses - Frost impact acrylic lens 88% transmissive.
Surface kit - Extruded Aluminum 0.07" nominal, matte white or silver powder coating. Custom
finishes are also available.
WEIGHT
27.53 lbs.+8.26lbs. - 12.5kg+3.75 kg
CERTIFICATIONS
ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA
Standard C22.2 No. 250.0.
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
File Name: VEGA24.SURFACE.SPEC
LumenWerx ULC. reserves the right to change or modify product specifications without notification
February 20, 2015
Page: 3 / 3