VIA 3
RECESSED
W W W . L U M E N W E R X . C O M
DESCRIPTION
PROJECT:
Via 3 is a compact linear luminaire
system for pendant, surface, and
recessed or in-wall installation, whether
TYPE:
as discrete luminaires, continuous runs,
NOTES:
or patterns. Via 3 features numerous
high-efficiency optical configurations,
and offers a wide range of electrical
options and trim details.
See separate spec sheets for patterns,
LED and other mountings.
Grid - regressed lens
Drywall - flush lens
IC RATED
ORDER GUIDE
HLO
1S
LUMINAIRE ID
OPTICS
LIGHT SOURCE
NUMBER OF LAMPS
LUMINAIRE LENGTH
VIA3RF - via 3" recessed flush lens
HLO - High-Efficiency Lambertian Optic
T5 - T5 lamp
1S - 1 staggered
Standard sections - 2', 3', 4', 5', 8' & 12'
VIA3RR - via 3" recessed regressed lens
T5HO - T5HO lamp
For all other specify length
#FT - nominal length in feet
#IN - length in inches
Continuous Run - for luminaires over 12'
Minimum Individual section 2'
VOLTAGE
BALLAST
ELECTRICAL
MOUNTING
FINISH
120 - 120V
RS - rapid start
1 - 1 circuit
TG9 - tegular 9/16"
W - matte white
277 - 277V
D - dimming 0-10V
+#EB - emergency battery pack (for min 4' fixture)
TG15 - tegular 15/16"
CF# - custom finish specify RAL#
UNV - 120V-277V
ST - step dimming
+#EM - emergency light circuit
TB9 - t-bar 9/16"
347 - 347V
DA - dali
+#NL - night light circuit
TB15 - t-bar 15/16"
LHL - Lutron Hi-Lume 3D
+#COB/MR - COB/MR circuit
ST - screw slot t-bar
LEH - Lutron EcoSystem H
+GTD - generator transfer device
DTR - drywall trim
LE- Lutron EcoSystem
DTL - drywall trimless
DMF - drywall mud flange
OHC - other ceiling (specify)
CONTROLS
LED DOWNLIGHT
COB CRI
COB LUMEN PACK.
COB COLOR TEMP.
COB DRIVER
OPTIONS
ONBOARD
#COB20 - COB 20º
80 - 80CRI
600 - 600lm
30 - 3000k
D - dimming 0-10V
FU - fuse
OMS - Motion Sensor & power pack
#COB30 - COB 30º
90 - 90CRI
1200 - 1200lm
35 - 3500k
DA - Dali
FWC - flexible whip
ODS - Daylight Sensor & controller
#COB40 - COB 40º
97 - 97CRI
1800 - 1800lm
40 - 4000k
LHL# - Lutron Hi-Lume A
cable (6' std)
WIRELESS
#MR16 - MR16 LED
(consult
LEH - Lutron EcoSystem H
CP - Chicago Plenum
EWC - EnOcean Wireless Controller
Minimum individual
factory)
LE5 - Lutron EcoSystem 5
CU - custom
LMC - Lutron Motion Controller
section with
LDC - Lutron Daylight Controller
downlight 4'
OTH - other (consult factory)
See page 2 for ordering code detailed information
CROSS SECTION
OPTICS
4"
5"
3 3/4"
4 3/4"
3 1/32"
1"
3 1/32"
VIA3RF - flush
VIA3RR - regressed
HLO - High-efficiency Lambertian Optic
TECHZONE™ & USG Compatible with 4" ceiling
File Name: VIA3-FLU-RECESSED-SPEC
Page: 1 / 3
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
May 11, 2016
VIA 3
RECESSED
W W W . L U M E N W E R X . C O M
OPTICS
3 1/32"
3 1/32"
3 27/32"
4"
between T-bars
3 27/32"
4"
between T-bars
HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - matte white side reflectors
combined with High-Efficiency Lambertian Optic (HLO) shielding of diffusing 0.075"
thick acrylic with up to 88% transmission and good source obscuration. Luminaire
brightness is controlled by the flux-to-shielding area ratio.
LUMINAIRE LENGTH
Via 3 is made up of standard 2, 3, 4, 5, 8 and 12 foot sections that may be joined
together to create longer continuous run lengths. Exact run length must be noted in
the product code. The minimum individual section available is 2 foot.
All individual sections are joined together onsite using the joiner kits provided.
TB15 - t-bar 15/16"
ST - screw slot t-bar
Mounting for drywall ceilings are available with
visible trim, mud flange trim or trimless
3 1/32"
LumenWerx offers joiner kits that are extremely simple to work with in the field
and result in a fixture that appears virtually seamless with no light leak at any
connection.
4 5/8"
3 3/4"
Joining system
3 5/8"
hole width
4 5/32"
with flanges
DTR - drywall trim
3 1/32"
3 1/32"
t-bar
Mud flange
3 3/4"
Trim & Trimless
3 3/4"
ELECTRICAL
Universal input voltages with multiple control schemes offered. Consult factory for
availability.
3 5/32"
hole width
DTL - drywall trimless
3 7/8"
hole width
5 5/8"
with flanges
DMF - drywall mud flange
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test
FINISH
switch and charge indicator, minimum of 90 minutes operation. Recharge time of
Interior - 95%, reflective matte powder coated
24 hours.
white paint
Exterior - matte white or silver powder coating.
MOUNTING OPTIONS
Custom finishes are also available.
Recess mount into exposed or concealed T-Bar or Tegular grid ceiling Via 3 is fully
compatible with Armstrong Techzone™ & USG ceilings
CONTROLS
LumenWerx offers several options for integrating
3 1/32"
3 1/32"
3 1/32"
motionand daylight controls into Via 3 luminaires.
Wireless options incorporate a wireless
controller/powerpack into the luminaire, which
receives signals from a wireless sensor (by others)
3 27/32"
4"
between T-bars
TG9 - tegular 9/16"
3 27/32"
4"
between T-bars
TG15 - tegular 15/16"
3 27/32"
4"
between T-bars
TB9 - t-bar 9/16"
installed in the space. The advantages of the
wireless option include greater flexibility of control
options, sensor coverage and system integration.
Onboard options incorporate both the sensor and
controller/powerpack. Onboard sensors, while
inherently simpler, have limitations of control and
coverage.
File Name: VIA3-FLU-RECESSED-SPEC
Page: 2 / 3
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
May 11, 2016
VIA 3
RECESSED
W W W . L U M E N W E R X . C O M
Onboard
WEIGHT
Onboard Motion Sensor and power pack (OMS) provide automatic on and
Via 3 4ft - 11.12lbs - 5.05kg
automatic off control, using PIR detection. Sensor is designed to detect fine-motion
Via 3 8ft - 22.25lbs - 10.1kg
when installed within 6' of occupants.
Via 3 12ft - 33.48lbs - 15.2kg
Onboard Daylight Sensor and controller (ODS) provide input for 0-10V dimming
drivers. Separate switched control of line input is required for on/off control.
CERTIFICATIONS
ETL - Rated for Dry/Damp locations. Conforms to UL
Standard 1598 and certified to CAN/CSA Standard
C22.2 No. 250.0.
2"
Chicago plenum - City of Chicago Approved (CCEA)
Location of an Onboard sensor
IC rated - suitable for direct contact with insulation.
Wireless
EnOcean Wireless Controller (EWC) provides both a power pack for presence
detection control and a 0-10V interface for daylight harvesting. EnOcean wireless
sensors (by others) mounted in the room signal the onboard EWC. This option
permits manual on/automatic off (vacancy) control.
Lutron Motion Controller (LMC) and Lutron Daylight Controller (LDC) provide
inputs to Ecosystem drivers. Compatible Lutron wireless motion and daylight
sensors (by others) mounted in the room signal onboard LPC or LDC. This option
permits manual on/automatic off (vacancy) control.
LIGHT SOURCE - COB
Fixtures with Chip On Board (COB) technology are
able to provide a maximum output of 1800 lumens
from a discrete 50mm aperture on 8 inch centers.
Standard CRI is 80, for 90 and 97 CRI with elevated
R9 values please consult factory. Standard 20,
30 and 40 degree beam angles are available, as
are custom angles with prior factory approval. All
our Chip-On-Board products have been tested in
Chip On Board (COB)
accordance with IESNA LM-80-08 and the results
have shown L80 lumen maintenance greater than 50,000 hours.
LIGHT SOURCE - MR16
Our MR16 option is a replaceable bulb solution which allows for up to a 50W
halogen equivalent solution.
CONSTRUCTION
Housing - Extruded Aluminum (0.095" nominal) up to 90% Recycled Content
Interior brackets - Die formed cold rolled sheet steel 18 gauge thick
Joining system - Die cast Zinc (0.95" nominal) and die Formed galvanized sheet 18
gauge
Reflectors - Cold rolled steel 0.024” thick precisely die formed, 95% reflective
matte white painted
Recessed flanges - Extruded Aluminum (0.075" nominal) up to 90% Recycled
Content
Mud flange - Extruded Aluminum (0.075" nominal) up to 90% Recycled Content
Slip-through bracket - Die Formed galvanized sheet 18 gauge
End plate - Die formed cold rolled sheet steel 18 gauge thick
File Name: VIA3-FLU-RECESSED-SPEC
Page: 3 / 3
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
May 11, 2016