VIA 3 LED
SURFACE
W W W . L U M E N W E R X . C O M
DESCRIPTION
PROJECT:
Via 3 is a compact linear LED
luminaire system for pendant, surface,
and recessed or in-wall installation,
TYPE:
whether as discrete luminaires,
NOTES:
continuous runs, or patterns. Via 3
features numerous high-efficiency
optical configurations, including wall
wash, asymmetric and offers a wide range
of electrical options and trim details.
See separate spec sheets for patterns and
other mountings.
Shown with HLO optics
up to 104 lm/w performance
ORDER GUIDE
VIA3S
HLO
LED
LUMINAIRE ID
OPTICS
LIGHT SOURCE
CRI
LUMEN PACKAGES
COLOR TEMP.
VIA3S - via 3" surface
HLO - High-Efficiency Lambertian Optic
LED - high performance LED
80 - 80CRI
500 - low output 500lm/ft
30 - 3000k
90 - 90CRI
750 - med. output 750lm/ft
35 - 3500k
1000 - high output 1000lm/ft
40 - 4000k
LUMINAIRE LENGTH
VOLTAGE
DRIVER
ELECTRICAL
MOUNTING
FINISH
Standard sections - 2', 3', 4', 5', 8' & 12'
120 - 120V
D - dimming 0-10V
1 - 1 circuit
GRD - grid ceiling
W - matte white
For all other specify length
277 - 277V
DA - Dali
+#EB - emergency battery pack
DRC - drywall ceiling
AL - aluminum
#FT - nominal length in feet
UNV - 120V-277V
LA2 - Lutron Hi-Lume A - 2 wires 120V
(for min 4' fixture)
OHC - other ceiling
B - matte black
#IN - length in inches
347 - 347V
LA3 - Lutron Hi-Lume A - 3 wires /EcoS
+#EM - emergency light circuit
(specify)
CF# - custom
Continuous Run - for luminaires
LEH - Lutron EcoSystem H
+#NL - night light circuit
finish specify
over 12'
LE5 - Lutron EcoSystem 5
+#COB/MR - COB/MR circuit
RAL#
Minimum Individual section 2'
OTH - other (consult factory)
+GTD - generator transfer device
CONTROLS
LED DOWNLIGHT
COB CRI
COB LUMEN PACK.
COB COLOR TEMP.
COB DRIVER
OPTIONS
ONBOARD
#COB20 - COB 20º
80 - 80CRI
600 - 600lm
30 - 3000k
D - dimming 0-10V
FU - fuse
OMS - Motion Sensor & power pack
#COB30 - COB 30º
90 - 90CRI
1200 - 1200lm
35 - 3500k
DA - Dali
TB# - T-bar caddy clip
ODS - Daylight Sensor & controller
#COB40 - COB 40º
97 - 97CRI
1800 - 1800lm
40 - 4000k
LHL# - Lutron Hi-Lume A
specify grid size
WIRELESS
#MR16 - MR16 LED
(consult
LEH - Lutron EcoSystem H
TG# - Tegular caddy
EWC - EnOcean Wireless Controller
Minimum individual
factory)
LE5 - Lutron EcoSystem 5
clip specify grid size
LMC - Lutron Motion Controller
section with
OTH - other (consult factory)
ST - Screw Slots
LDC - Lutron Daylight Controller
downlight 4'
caddy clip
CU - custom
CROSS SECTION
OPTICS
See page 2 for ordering code detailed information
4 1/4"
3 1/32"
VIA3S - surface
HLO - High-efficiency Lambertian Optic
File Name: VIA3-SURFACE-SPEC
Page: 1 / 4
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
June 12, 2016
VIA 3 LED
SURFACE
W W W . L U M E N W E R X . C O M
OPTICS
MOUNTING OPTIONS
HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - Matte white side reflectors
Fixtures can be mounted directly to T-Bar, drywall
combined with High-Efficiency Lambertian Optic (HLO) shielding of diffusing 0.075"
and hard surface ceilings, hardware supplied by
thick acrylic with up to 88% transmission and good source obscuration. Luminaire
others. Long runs require a minimum of 6" distance
brightness is controlled by the flux-to-shielding area ratio.
from the vertical wall.
LIGHT SOURCE - LED
FINISH
Custom linear array of mid-flux LED's are cartridge-mounted with quick-connect
Interior - 95%, reflective matte powder coated
wiring to facilitate service and thermal management. Available in 3000K, 3500K
white paint
and 4000K with a minimum 80 CRI and an option for 90 CRI with elevated R9
Exterior - matte white, matte black or silver powder
value. Color consistency maintained to within 3 SDCM. LEDs operated at reduced
coating.
drive current to optimize efficacy and lumen maintenance.
Custom finishes are also available.
All LEDs have been tested in accordance with IESNA LM-80-08 and the results
have shown L80 lumen maintenance greater than 60,000 hours. Absolute product
CONTROLS
photometry is measured and presented in accordance with IESNA LM-79, unless
LumenWerx offers several options for integrating
otherwise indicated.
motionand daylight controls into Via 3 luminaires.
Wireless options incorporate a wireless
PERFORMANCE PER 4' AT 4000K
LED output
Color Temp
Watts
Nominal Delivered
Lumens
Efficacy
LPW
controller/powerpack into the luminaire, which
receives signals from a wireless sensor (by others)
installed in the space. The advantages of the
low output
4000K
19
2000
104
medium output
4000K
29
3000
103
options, sensor coverage and system integration.
high output
4000K
39
4000
102
Onboard options incorporate both the sensor and
wireless option include greater flexibility of control
controller/powerpack. Onboard sensors, while
LUMINAIRE LENGTH
inherently simpler, have limitations of control and
Via 3 is made up of standard 2, 3, 4, 5, 8 and 12 foot
coverage.
Onboard
sections that may be joined together to create longer
continuous run lengths. Exact run length must be
Onboard Motion Sensor and power pack (OMS)
noted in the product code. The minimum individual
provide automatic on and automatic off control,
section available is 2 foot, and continuous run lengths
using PIR detection. Sensor is designed to detect
can be ordered in 2 inch increments.
fine-motion when installed within 6' of occupants.
Onboard Daylight Sensor and controller (ODS)
All individual sections are joined together onsite using
the joiner kits provided. LumenWerx offers joiner kits
joining system Via 3 direct
provide input for 0-10V dimming drivers. Separate
that are extremely simple to work with in the field and
switched control of line input is required for on/off
result in a fixture that appears virtually seamless with
control.
no light leak at any connection.
2"
ELECTRICAL
Location of an Onboard sensor
Factory-set adjustable output current electronic driver with 120-277V AC line input.
Dimmable from at least 100%-5% with 0-10V control. Rated life (90% survivorship)
of 50,000 hours at 50ºC max. ambient (and 70ºC max. case) temperature. At
maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options
include Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-toblack) and EcoSystem 5 (100%-5%) dimmable drivers and DALI protocol drivers.
Wireless
EnOcean Wireless Controller (EWC) provides both
a power pack for presence detection control and
a 0-10V interface for daylight harvesting. EnOcean
wireless sensors (by others) mounted in the room
signal the onboard EWC. This option permits manual
on/automatic off (vacancy) control.
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test
switch and charge indicator, minimum of 90 minutes operation, up to 1000 lumens
per 4ft (25ºC) emergency lighting output. Recharge time of 24 hours.
File Name: VIA3-SURFACE-SPEC
Page: 2 / 4
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
June 12, 2016
VIA 3 LED
SURFACE
W W W . L U M E N W E R X . C O M
Lutron Motion Controller (LMC) and Lutron Daylight Controller (LDC) provide
inputs to Ecosystem drivers. Compatible Lutron wireless motion and daylight
sensors (by others) mounted in the room signal onboard LPC or LDC. This option
permits manual on/automatic off (vacancy) control.
LIGHT SOURCE - COB
Fixtures with Chip On Board (COB) technology are
able to provide a maximum output of 1800 lumens
from a discrete 50mm aperture on 8 inch centers.
Standard CRI is 80, for 90 and 97 CRI with elevated
R9 values please consult factory. Standard 20º, 30º
and 40º beam angles are available, as are custom
angles with prior factory approval. All our Chip-OnBoard products have been tested in accordance
Chip On Board (COB)
with IESNA LM-80-08 and the results have shown
L80 lumen maintenance greater than 50,000 hours.
LIGHT SOURCE - MR16
Our MR16 option is a replaceable bulb solution which allows for up to a 50W
halogen equivalent solution.
CONSTRUCTION
Housing - Extruded Aluminum (0.095" nominal) up to 90% Recycled Content
Interior brackets - Die formed cold rolled sheet steel 18 gauge thick
Joining system - Die cast Zinc (0.95" nominal)
Reflectors - Cold rolled steel 0.024” thick precisely die formed, 95% reflective
matte white painted
End caps - Die cast Aluminum (0.95" nominal)
WEIGHT
Via 3 4ft - 11.12lbs - 5.05kg
Via 3 8ft - 22.25lbs - 10.1kg
Via 3 12ft - 33.48lbs - 15.2kg
CERTIFICATIONS
ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to
CAN/CSA Standard C22.2 No. 250.0.
DLC - Testing to DLC requirements, for this product, have been completed by an
Accredited Laboratory and certified by DLC.
Lighting facts - testing products and reporting performance results according to
industry standards.
WARRANTY
LumenWerx provides a five-year limited warranty of electrical and mechanical
performance of the luminaires, including the LED boards, drivers, and auxiliary
electronics. LumenWerx will repair or replace defective luminaires or components
at our discretion, provided they have been installed and operated in accordance
with our specifications. Other limitations apply, please refer to the full warranty on
our website.
File Name: VIA3-SURFACE-SPEC
Page: 3 / 4
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
June 12, 2016
VIA 3 LED
SURFACE
W W W . L U M E N W E R X . C O M
500 LUMEN AT 80CRI - LOW OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
254
600
508
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
Efficacy
low output
3000K
20
2000
98
low output
3500K
20
2000
101
low output
4000K
19
2000
104
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
medium output
3000K
31
3000
97
medium output
3500K
30
3000
100
medium output
4000K
29
3000
103
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
high output
3000K
41
4000
96
high output
3500K
40
4000
99
high output
4000K
39
4000
102
600
762
300
1016
300
750 LUMEN AT 80CRI - MEDIUM OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
381
600
762
Efficacy
600
1143
300
1525
300
1000 LUMEN AT 80CRI - HIGH OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
508
600
1016
Efficacy
600
1525
300
2033
300
File Name: VIA3-SURFACE-SPEC
Page: 4 / 4
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
June 12, 2016