VIA 5
RECESSED VERTICAL
W W W . L U M E N W E R X . C O M
DESCRIPTION
Via 5 is a high-output linear luminaire
system for pendant, surface, and
PROJECT:
recessed or in-wall installation,
TYPE:
whether as discrete luminaires,
NOTES:
continuous runs or patterns.
Via 5 features multiple optical
configurations, including wide range
of electrical, control and trim options.
See separate spec sheets for
LED, patterns and other available
mountings.
Flush - shown with HLO optics
IC RATED
ORDER GUIDE
VIA5RVF
HLO
LUMINAIRE ID
OPTICS
LIGHT SOURCE
NUMBER OF LAMPS
LUMINAIRE LENGTH
VIA5RVF - via 5" recessed vertical flush lens
HLO - High-Efficiency Lambertian Optic
T5 - T5 lamp
1S - 1 staggered
Standard sections - 2', 3', 4', 5', 8' & 12'
T5HO - T5HO lamp
2S - 2 staggered
For all other specify length
For T8 lamps
#FT - nominal length in feet
consult factory
#IN - length in inches
Continuous Run - for luminaires over 12'
Minimum Individual section 2'
VOLTAGE
BALLAST
ELECTRICAL
MOUNTING
FINISH
120 - 120V
RS - rapid start
1 - 1 circuit
DTR - drywall trim
W - matte white
277 - 277V
D - dimming 0-10V
2 - 2 circuits
DTL - drywall trimless
CF# - custom finish specify RAL#
UNV - 120V-277V
ST - step dimming
+#EB - emergency battery pack (for min 4' fixture)
DMF - drywall mud flange
347 - 347V
DA - dali
+#EM - emergency light circuit
OHW - other wall (specify)
LHL - Lutron Hi-Lume 3D
+#NL - night light circuit
LEH - Lutron EcoSystem H
+GTD - generator transfer device
LE- Lutron EcoSystem
See page 2 for ordering code detailed information
CONTROLS
OPTIONS
ONBOARD
FU - fuse
OMS - Motion Sensor & power pack
FWC - flexible whip cable (6' std)
ODS - Daylight Sensor & controller
CP - Chicago Plenum
WIRELESS
CU - custom
EWC - EnOcean Wireless Controller
LMC - Lutron Motion Controller
LDC - Lutron Daylight Controller
CROSS SECTION
OPTICS
1/2"
6 5/32" 5 5/8"
hole
with
flanges width
5 1/32"
3 3/4"
VIA5RVF - flush
HLO - High-efficiency Lambertian Optic
File Name: VIA5-FLU-RECESSED-VERTICAL-SPEC
Page: 1 / 3
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
June 13, 2016
VIA 5
RECESSED VERTICAL
W W W . L U M E N W E R X . C O M
OPTICS
MOUNTING OPTIONS
HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - matte white side reflectors
Recessed Wall Mounting for drywall is available with
combined with High-Efficiency Lambertian Optic (HLO) shielding of diffusing 0.075"
visible trim, mud flange, trim or trimless
thick acrylic with up to 88% transmission and good source obscuration. Luminaire
1/2"
brightness is controlled by the flux-to-shielding area ratio.
LUMINAIRE LENGTH
Via 5 is made up of standard 2, 3, 4, 5, 8 and 12 foot sections that may be joined
together to create longer continuous run lengths. Exact run length must be noted in
6 5/32" 5 5/8"
hole
with
flanges width
the product code. The minimum individual section available is 2 foot.
5 1/32"
3 3/4"
All individual sections are joined together onsite using the joiner kits provided.
LumenWerx offers joiner kits that are extremely simple to work with in the field
DTR - drywall trim
and result in a fixture that appears virtually seamless with no light leak at any
connection.
1/2"
5 5/32"
hole
width
5 1/32"
3 3/4"
DTL - drywall trimless
Mud flange joining system
Trim & Trimless joining system
ELECTRICAL
Universal input voltages with multiple control schemes offered. Consult factory for
7 5/8" 5 7/8"
with hole
flanges width
5 1/32"
availability.
3 3/4"
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test
DMF - drywall mud flange
switch and charge indicator, minimum of 90 minutes operation, up to 1000 lumens
per 4ft (25ºC) emergency lighting output. Recharge time of 24 hours.
FINISH
Interior - 95%, reflective matte powder coated
white paint
Exterior - matte white powder coating.
Custom finishes are also available.
File Name: VIA5-FLU-RECESSED-VERTICAL-SPEC
Page: 2 / 3
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
June 13, 2016
VIA 5
RECESSED VERTICAL
W W W . L U M E N W E R X . C O M
CONTROLS
LumenWerx offers several options for integrating motion and daylight controls into
Via 5 luminaires. Wireless options incorporate a wireless controller/powerpack into
the luminaire, which receives signals from a wireless sensor (by others) installed in
the space. The advantages of the wireless option include greater flexibility of control
options, sensor coverage and system integration. Onboard options incorporate
both the sensor and controller/powerpack. Onboard sensors, while inherently
simpler, have limitations of control and coverage.
Onboard
Onboard Motion Sensor and power pack (OMS) provide automatic on and
automatic off control, using PIR detection. Sensor is designed to detect fine-motion
when installed within 6' of occupants.
Onboard Daylight Sensor and controller (ODS) provide input for 0-10V dimming
drivers. Separate switched control of line input is required for on/off control.
2"
Location of an Onboard sensor
Wireless
EnOcean Wireless Controller (EWC) provides both a power pack for presence
detection control and a 0-10V interface for daylight harvesting. EnOcean wireless
sensors (by others) mounted in the room signal the onboard EWC. This option
permits manual on/automatic off (vacancy) control.
Lutron Motion Controller (LMC) and Lutron Daylight Controller (LDC) provide
inputs to Ecosystem drivers. Compatible Lutron wireless motion and daylight
sensors (by others) mounted in the room signal onboard LPC or LDC. This option
permits manual on/automatic off (vacancy) control.
CONSTRUCTION
Housing - Extruded Aluminum (0.095" nominal) up to 90% Recycled Content
Interior brackets - Die formed cold rolled sheet steel 18 gauge thick
Joining system - Die cast Zinc (0.95" nominal) and die Formed galvanized sheet 18
gauge
Reflectors - Cold rolled steel 0.024” thick precisely die formed, 95% reflective
matte white painted
Recessed flanges - Extruded Aluminum (0.075" nominal) up to 90% Recycled
Content
Mud flange - Extruded Aluminum (0.075" nominal) up to 90% Recycled Content
Slip-through bracket - Die Formed galvanized sheet 18 gauge
End plate - Die formed cold rolled sheet steel 18 gauge thick
WEIGHT
Via 5 4ft - 11.78lbs - 5.35kg
Via 5 8ft - 23.79lbs - 10.8kg
Via 5 12ft - 35.24lbs - 16kg
CERTIFICATIONS
ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to
CAN/CSA Standard C22.2 No. 250.0.
Chicago plenum - City of Chicago Approved (CCEA)
IC rated - suitable for direct contact with insulation
File Name: VIA5-FLU-RECESSED-VERTICAL-SPEC
Page: 3 / 3
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
June 13, 2016