VPX3-530 release 6_5_13 - Curtiss

advertisement
MEDIA RELEASE
Curtiss-Wright Introduces Rugged Dual 4GSPS Transceiver on
3U VPX Card for C4ISR Applications
New high channel, high-speed analog IO engine features on-board Xilinx® Virtex®-7 FPGA
HIGH WYCOMBE, UK – June 5, 2013 – Curtiss-Wright Controls Defense Solutions, a business group of
Curtiss-Wright Controls, has introduced a new dual channel ADC/DAC engine, the VPX3-530 that
combines two (2) channels of 4 GSPS 12-bit ADC and two (2) channels of 14-bit DAC data conversion on
a single, rugged 3U OpenVPX™ card. This next generation transceiver card also provides a user
programmable Xilinx® Virtex®-7 FPGA to couple the ADC and DAC channels for very low latency
between inputs and outputs. Designed for SWaP-constrained embedded digital receiver applications
deployed in harsh defense and aerospace environments, the VPX3-530 is ideal for use in base stations,
ground and airborne applications such as SIGINT, ELINT, SDR (Software Defined Radio), Radar Warning
Receivers, and ECM Radar.
“Our new VPX3-530 ADC/DAC engine delivers the combined high data conversion rates and channel
density previously only available in a 6U form-factor,” said Lynn Bamford, senior vice president and
general manager of Curtiss-Wright Controls Defense Solutions. “This next generation ADC/DAC engine is
ideal for SWaP-constrained C4ISR platforms and optimized with Curtiss-Wright’s ruggedization and
packaging expertise.”
About the VPX3-530
The VPX3-530 combines multi-channel high-speed ADCs and DACs in a range of rugged build formats.
The compact board provides support for up to four analog inputs, which can be configured as dual 4
GSPS/12-bit or four (4) 2 GSPS/12-bit channels. Each analog input is AC coupled via baluns for
maximum ADC performance. The analog inputs are complemented with two (2) 5.6 GSPS 14-bit DACs.
The VPX3-530 also features a user programmable Virtex-7 VX690T FPGA (speed grade 2) a member of
Xilinx's 28nm 7-Series family. The FPGA is supported by two high speed DDR3L memory resources
directly connected the FPGA. The FPGA configuration images can be stored in either the flash memory
or DDR SDRAM configuration memory and can be updated by the host CPU using the PCI Express®
(PCIe) interface. The DDR DRAM resource enables configurations to be downloaded from the host and
bypass the non-volatile flash. Because SDRAM-based configuration is volatile, it is ideal for security
sensitive applications and allows the VPX3-530 to be more easily declassified should the need arise.
The FPGA can be reconfigured from any one of a number of images indexed in the flash including a write
protected recovery configuration. FPGA configuration from either flash or DDR SDRAM can also take
advantage of AES encryption.
The VPX3-530 provides the choice of two (2) RF sample clock sources through the front panel. Modes
are supported that allow synchronous ADC and DAC data sampling or independent sample clock for the
ADCs and DACs. This allows coherent input and output sampling or the ability to operate the ADCs and
DACs separately. To deliver maximum performance the VPX3-530 uses an external clock source instead
of a local sample clock.
A key feature of the VPX3-530 is its ability to operate in a synchronous mode across multiple boards to
form an array of synchronized analog inputs. This feature is critical for applications such as
SIGINT/Direction Finding (DF) or other applications that require beamforming.
VPX3-530 Performance Features:
• Dual 4 GSPS 12-bit or Quad 2 GSPS 12-bit analog inputs
• Dual 5.6 GSPS 14-bit DAC update rate (maximum 2.8 GSPS data rate)
• Multi-board, multi-channel synchronization
• Xilinx® user programmable Virtex®-7 VX690T FPGA
MEDIA RELEASE
•
•
•
•
•
Up to 8 Gbytes DDR3L SDRAM (64-bit data paths per bank)
3U OpenVPX™ compliant
Onboard power and temperature measurement
VxWorks® and Linux® host support
Air- and Conduction-cooled variants
Software Support
Software support for the VPX3-530 includes Curtiss-Wright’s FusionXF Development Kit which provides
software, HDL and utilities complete with examples for using the VPX3-530. FusionXF includes a C
programming language API, driver framework and sophisticated DMA support. One of the core elements
to the FusionXF development kit is a framework that speeds and eases the addition of new IP
functionality or capabilities to the FPGA. Software utilities are also provided for configuring the FPGA.
These include flash programming and configuring the FPGA from one of many indexed images in flash
memory. FusionXF supports Wind River® VxWorks® and Linux Fedora operating environments.
Additional operating systems, such as Windows®, or other distributions can be considered on request.
Rugged Build Options
The VPX3-530 is offered in a wide range of ruggedization configurations, including commercial, air-cooled
rugged and conduction-cooled. Contact Curtiss-Wright for details.
For availability and pricing information, please contact the factory.
Click here for more information on the VPX3-530.
Sales & Editorial Contacts
For additional information on CWCDS please visit: http://www.cwcdefense.com.
For editorial information regarding Curtiss-Wright Controls Defense Solutions products or services,
contact John Wranovics, public relations director, Curtiss-Wright Controls, Tel: (925) 640-6402; email:
jwranovics@curtisswright.com.
Sales inquiries: Please forward all Sales and reader service inquiries to Jerri-Lynne Charbonneau,
Curtiss-Wright Controls Defense Solutions, Tel: (613) 254-5112; Fax: (613) 599-7777; e-mail:
defensesales@curtisswright.com.
About Curtiss-Wright Controls Defense Solutions
Curtiss-Wright Controls Defense Solutions is a long established technology leader in the development of
rugged electronic modules and systems for defense applications. The Defense Solutions group serves as
a technology and integration partner to its customers, providing a full range of advanced, highly
engineered solutions from modular open systems approaches to fully custom optimized solutions. Our
unmatched capabilities and product breadth span from industry standard based COTS modules to
complete electronic subsystems. The company’s modules and systems are currently deployed in a wide
range of demanding defense & aerospace applications including C4ISR systems, unmanned subsystems,
mission computing, fire control, turret stabilization, and recording & storage solutions. Additionally, the
company’s broad engineering capabilities combine systems, software, electrical, and mechanical design
expertise with comprehensive program management and a broad range of life-cycle support services. For
more information visit www.cwcdefense.com.
About Curtiss-Wright Controls, Inc.
Headquartered in Charlotte, NC, Curtiss-Wright Controls is the Controls segment of Curtiss-Wright
Corporation and a leading designer and manufacturer of advanced technologies for niche actuation and
drive applications, integrated sensors and controls, and electronic subsystems internationally for the
aerospace, defense and industrial markets. For more information, visit www.cwcontrols.com.
###
MEDIA RELEASE
NOTE: Trademarks are property of their respective owners
Download