CERTOLUX
S P E C I A LT Y LU M I N A I R E S
Cleanrooms
Surface mount luminaires designed for ceiling,
wall and corner applications.
Sealed Teardrop design ideally suited for
laminar airflow cleanrooms.
Recessed grid or flange style luminaires with
inset or overlapping door available.
Grid designed to match the size of a
standard HEPA filter.
CERTOLUX
S P E C I A LT Y LU M I N A I R E S
www.certolux.com
Email: info@certolux.com
35 Oak Street, Toronto, Ontario M9N 1A1
Phone: 647-777-3300 Fax: 416-245-4778
Corner Mount Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 4 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRC series by Certolux is a specification-grade luminaire for
Cleanroom applications. The overlapping single piece door design provides
for a continuous seal to the sealed housing. The luminaire can be corner
mounted and is IP65 certified.
3519
ProductSpecifications
Housing
Door Frame
Finish
Precision formed, TIG welded, one piece
18 gauge cold rolled steel housing.
Welded studs are used in order to mount
components, offering superior
performance over PEM style fasteners.
One piece 60° beveled perimeter door
frame, fabricated from 18 gauge, cold
rolled steel with TIG welded corners. It is
retained by stainless steel aircraft cable
when opened. Specialized, military grade,
flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings. Custom shaped, extruded
closed cell silicone gasketing is used
throughout to ensure precise, seals
between door assembly and housing.
Vulcanized corners ensure continuity of
the seal on the frame gasket. Continuous
retention-mounts mechanically secure
and evenly distribute force against both
gasketing and diffuser.
The luminaire is in a polyester powder
painted white finish and offiers a high
reflectivity coating for improved lighting
performance and efficiency.
Lens and Lens Retention
The standard lens assembly is made with
a tempered safety glass which is sealed
to the door frame with silicone sealant
and a pattern #12 acrylic lens overaly
which is mechanically secured. Other
lens options available. (see product
ordering guide)
Electrical
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lampe retention. See product
ordering guide for optional ballasts. A ½”
EMT hole is provided for wiring
connections.
Approvals
Approved to CSA and UL standards.
ETL Certified to IEC 60529 IP65
Dimensions
50.00in
1270.0mm
7.75in
196.9mm
7.75in
196.9mm
32.00in
812.8mm
4.75in
120.7mm
CROSS SECTION
(4)
.313in MOUNTING HOLES
8.0mm
.875 EMT ACCESS
TOP VIEW
(TYPICAL FOR BACK VIEW)
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRC - Cleanroom
Project
Cleanroom
CRC - Cleanroom
Project
Corner Mount Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 4 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRC series by Certolux is a specification-grade luminaire for
Cleanroom applications. The overlapping single piece door design provides
for a continuous seal to the sealed housing. The luminaire can be corner
mounted and is IP65 certified.
3519
Ordering
C
CR
Size
(Width x
Length)
Series
-
/
3519
No. of
of
No.
Lamps
Lamps
Model
1L
2L
3L
24
36
48
Door/Housing
Gauge
A
E
H
L
Mount
Type
C - Corner
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
T8
Type
- 18 Ga. CRS (Painted)*
- 18 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)
- 18 Ga. SS #316 (Painted)
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
R - Rapid Start
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
* Standard Door Frame and Housing Material
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P18 UV Filtering
P06 .125 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Fusing and Breaker Options
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
T5
T6
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Lamp Watts
Nom. Lamp Watts
T8
T5HO
Size
T5
24
14
24
17
40, 50, 55
(2 lamps max.)
36
21
39
25
-
48
28
54
32
-
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
PLL
Approvals Options
X7 Dual CSA/USA
X8 IP65 Rated
Lamp Options
Z1 Lamps Installed (Specify Type)
+ T5HO Lamps only
www.certolux.com
Recessed Cleanroom Luminaire
with Door Frame, PLL Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRG2X2 series by Certolux is a specification-grade, luminaire which provides a
cost-effective fluorescent Cleanroom lighting solution. The model 3425 is designed
as a lay-in unit with the dimensional width of a standard HEPA filter which allows for a
consistent ceiling grid spacing for both luminaires and filters. The housing flange
facilitates easing sealing to the ceiling grid.
3425
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing, code
gauge cold rolled steel welded
construction. Holes are provided on
single piece end plates for chain
mounting support to building structure.
The lamp compartment is protected by a
clear polycarbonate lens with an option
pattern 12 overlay. The lens is secured
with adjustable Z style brackets with
through studs on housing faceplate. Clear
tempered glass lens optional see ordering
guide.
All electrical components are CSA or UL
approved. Rotary lock lamp holders
provided ensure positive lamp retention.
Standard electronic ballasts are
programmed or rapid start, with a THD of
less than 20%. Luminaires are provided
standard with cord and plug and sealed
connector(120v) to facilitate wiring to
external power source(No plug for other
voltages) Note: Cord connection not
supplied for US Market. Ballast
disconnects are standard for easy ballast
maintenance.
Door Frame
Single piece precision die formed, code
gauge cold rolled steel painted to match
housing. Stainless steel acorn style
fasteners and safety cable allow for easy
re-lamping.
Finish
The luminaire is in a powder painted
white finish.
Approvals
Reflector
The reflector is high reflectance aluminum
for optimum lighting performance and
efficiency.
Approved to CSA and UL standards.
Photometrics
Efficiency of Cat No CRG2x22LPLL36P120 = 48% for additional
photometric information visit
www.certolux.com
Dimensions
4.30in
109.1mm
21.10in
536mm
23.63in
600.1mm
3.81in
96.9mm
21.10in
536mm
23.63in
600.1mm
CROSS SECTION
.875in
22.2mm
EMT ACCESS
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRG2X2 - Cleanroom
Project
Cleanroom
CRG2X2 - Cleanroom
Project
Recessed Cleanroom Luminaire
with Door Frame, PLL Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRG2X2 series by Certolux is a specification-grade, luminaire which provides a
cost-effective fluorescent Cleanroom lighting solution. The model 3425 is designed
as a lay-in unit with the dimensional width of a standard HEPA filter which allows for a
consistent ceiling grid spacing for both luminaires and filters. The housing flange
facilitates easing sealing to the ceiling grid.
3425
Ordering
CR
G
Series
2X2
3425
Size
(Width x
Length)
Model
/
2L No. of
of
No.
Lamps
Lamps
2L
2x2
Door/Housing
Gauge
Mount
Type
G - Grid (T-Bar)
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Lamp
Type
PLL
Lamp
Watts
See Table
below
Ballast
Type
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
R - Rapid Start
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Size
Nom. Lamp Watts
PLL/Biax
2x2
40, 50, 55
(4 lamps
max.)
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
+ PLL 50 and 55 Lamps only
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Cleanroom Luminaire
with Door Frame, T5, T5HO Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRG2X4 series by Certolux is a specification-grade, luminaire which provides a
cost-effective fluorescent Cleanroom lighting solution. The model 3425 is designed
as a lay-in unit with the dimensions of a standard HEPA filter which allows for a
consistent ceiling grid spacing for both luminaires and filters. The housing flange
facilitates easing sealing to the ceiling grid.
3425
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing, code
gauge cold rolled steel welded
construction. Holes are provided on
single piece end plates for chain
mounting support to building structure.
The lamp compartment is protected by a
clear polycarbonate lens with an option
pattern 12 overlay. The lens is secured
with adjustable Z style brackets with
through studs on housing faceplate. Clear
tempered glass lens optional see ordering
guide.
All electrical components are CSA or UL
approved. Rotary lock lamp holders
provided ensure positive lamp retention.
Standard electronic ballasts are
programmed or rapid start, with a THD of
less than 20%. Luminaires are provided
standard with cord and plug and sealed
connector(120v) to facilitate wiring to
external power source(No plug for other
voltages) Note: Cord connection not
supplied for US market. Ballast
disconnects are standard for easy ballast
maintenance.
Door Frame
Single piece precision die formed, code
gauge cold rolled steel painted to match
housing. Stainless steel acorn style
fasteners and safety cable allow for easy
re-lamping.
Finish
The luminaire is in a powder painted
white finish.
Approvals
Reflector
The reflector is high reflectance aluminum
for optimum lighting performance and
efficiency.
Approved to CSA and UL standards.
Photometrics
Efficiency of Cat No CRG2X44LT528P120 = 65% for additional
photometric information visit
www.certolux.com
Dimensions
4.29in
109.1mm
45.10in
1145.6mm
47.63in
1209.7mm
3.81in
96.9mm
21.10in
536mm
23.63in
600.1mm
CROSS SECTION
.875in
22.2mm
EMT ACCESS
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRG2X4 - Cleanroom
Project
Cleanroom
CRG2X4 - Cleanroom
Project
Recessed Cleanroom Luminaire
with Door Frame, T5, T5HO Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRG2X4 series by Certolux is a specification-grade, luminaire which provides a
cost-effective fluorescent Cleanroom lighting solution. The model 3425 is designed
as a lay-in unit with the dimensions of a standard HEPA filter which allows for a
consistent ceiling grid spacing for both luminaires and filters. The housing flange
facilitates easing sealing to the ceiling grid.
3425
Ordering
CR
G
Series
2X4
3425
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
4L
6L
2x4
Door/Housing
Gauge
Mount
Type
G - Grid (T-Bar)
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
Type
Voltage
120
277
347
UNV
UN4
P - Prog. Start
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Lamp Watts
Nom. Lamp Watts
T5
T5HO
2x4
28
54
(2,3,4 or (3,4 or 6
6 lamps) lamps max)
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
+ T5HO Lamps only
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Grid Cleanroom Luminaire
with Door Frame T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRG1X4 series by Certolux is a specification-grade, luminaire which
provides a cost-effective fluorescent Cleanroom lighting solution. The model
3522 is designed as a lay-in unit. The housing flange facilitates easing
sealing to the ceiling grid. It is suitable for ISO Class 5 - 8 Cleanrooms.
Available in 1x4 configurations.
3522
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing, 20 gauge
cold rolled steel welded construction.
Holes are provided on single piece end
plates for chain mounting support to
building structure.
The lamp compartment is protected by a
clear polycarbonate lens with an option
pattern 12 overlay. The lens is secured
with adjustable Z style brackets with
through studs on housing faceplate. Clear
tempered glass lens optional see ordering
guide.
All electrical components are CSA or UL
approved. Rotary lock lamp holders
provided ensure positive lamp retention.
Standard electronic ballasts are
programmed or rapid start, with a THD of
less than 20%. Ballast disconnects are
standard for easy ballast maintenance.
Door Frame
Single piece precision die formed, 18
gauge cold rolled steel painted to match
housing. Stainless steel acorn style
fasteners and safety cable allow for easy
re-lamping.
Reflector
Finish
The luminaire is in a powder painted
white finish.
Approvals
Approved to CSA and UL standards.
The reflector is high reflectance aluminum
for optimum lighting performance and
efficiency.
Dimensions
47.98in
1218.7mm
8.57in
217.7mm
4.54in
115.2mm
46.76in
1187.7mm
4.96in
126mm
10.76in
273.3mm
11.75in
298.5mm
47.75in
1212.8mm
.875in
22.2mm
EMT ACCESS
CROSS SECTION
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRG1X4 - Cleanroom
Project
Cleanroom
CRG1X4 - Cleanroom
Project
Recessed Grid Cleanroom Luminaire
with Door Frame T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRG1X4 series by Certolux is a specification-grade, luminaire which
provides a cost-effective fluorescent Cleanroom lighting solution. The model
3522 is designed as a lay-in unit. The housing flange facilitates easing
sealing to the ceiling grid. It is suitable for ISO Class 5 - 8 Cleanrooms.
Available in 1x4 configurations.
3522
Ordering
G
CR
Series
1X4
3522
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
1L
2L
3L
1x4
Door/Housing
Gauge
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Mount
Type
G - Grid (T-Bar)
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
T8
Type
Voltage
120
277
347
UNV
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp Watts
Nom. Lamp Watts
T5
T5HO
T8
1x4
28
54
32
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
- 120V
- 277V
- 347V
- 120-277V
Options
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Grid Cleanroom Luminaire
with Door Frame T5, T5HO, T8 or PLL Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRG2X2 series by Certolux is a specification-grade, luminaire which
provides a cost-effective fluorescent Cleanroom lighting solution. The model
3522 is designed as a lay-in unit. The housing flange facilitates easing
sealing to the ceiling grid. It is suitable for ISO Class 5 - 8 Cleanrooms.
Available in 2X2 configurations.
3522
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing, 20 gauge
cold rolled steel welded construction.
Holes are provided on single piece end
plates for chain mounting support to
building structure.
The lamp compartment is protected by a
clear polycarbonate lens with an option
pattern 12 overlay. The lens is secured
with adjustable Z style brackets with
through studs on housing faceplate. Clear
tempered glass lens optional see ordering
guide.
All electrical components are CSA or UL
approved. Rotary lock lamp holders
provided ensure positive lamp retention.
Standard electronic ballasts are
programmed or rapid start, with a THD of
less than 20%. Ballast disconnects are
standard for easy ballast maintenance.
Door Frame
Single piece precision die formed, 18
gauge cold rolled steel painted to match
housing. Stainless steel acorn style
fasteners and safety cable allow for easy
re-lamping.
Reflector
Finish
The luminaire is in a powder painted
white finish.
Approvals
Approved to CSA and UL standards.
The reflector is high reflectance aluminum
for optimum lighting performance and
efficiency.
23.98in
609.1mm
Dimensions
22.76in
578.1mm
4.54in
115.2mm
4.96in
126mm
23.75in
603.2mm
22.76in
578.1mm
23.75in
603.3mm
CROSS SECTION
.875in
22.2mm
EMT ACCESS
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRG2X2 - Cleanroom
Project
Cleanroom
CRG2X2 - Cleanroom
Project
Recessed Grid Cleanroom Luminaire
with Door Frame T5, T5HO, T8 or PLL Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRG2X2 series by Certolux is a specification-grade, luminaire which
provides a cost-effective fluorescent Cleanroom lighting solution. The model
3522 is designed as a lay-in unit. The housing flange facilitates easing
sealing to the ceiling grid. It is suitable for ISO Class 5 - 8 Cleanrooms.
Available in 2x2 configurations.
3522
Ordering
G
CR
Series
2X2
3522
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
2L
3L
4L
2x2
Door/Housing
Gauge
Mount
Type
G - Grid (T-Bar)
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Lamp
Type
Lamp
Watts
120
277
See Table
T5
347
below
T5HO
Ballast UNV
T8
Type
PLL
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp Watts
Nom. Lamp Watts
T5
T5HO
T8
PLL
2x2
14
24
17
40, 50, 55
- 120V
- 277V
- 347V
- 120-277V
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
Voltage
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Grid Cleanroom Luminaire
with Door Frame T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRG2X4 series by Certolux is a specification-grade, luminaire which
provides a cost-effective fluorescent Cleanroom lighting solution. The model
3522 is designed as a lay-in unit. The housing flange facilitates easing
sealing to the ceiling grid. It is suitable for ISO Class 5 - 8 Cleanrooms.
Available in 2x4 configurations.
3522
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing, 20 gauge
cold rolled steel welded construction.
Holes are provided on single piece end
plates for chain mounting support to
building structure.
The lamp compartment is protected by a
clear polycarbonate lens with an option
pattern 12 overlay. The lens is secured
with adjustable Z style brackets with
through studs on housing faceplate. Clear
tempered glass lens optional see ordering
guide.
All electrical components are CSA or UL
approved. Rotary lock lamp holders
provided ensure positive lamp retention.
Standard electronic ballasts are
programmed or rapid start, with a THD of
less than 20%. Ballast disconnects are
standard for easy ballast maintenance.
Door Frame
Single piece precision die formed, 18
gauge cold rolled steel painted to match
housing. Stainless steel acorn style
fasteners and safety cable allow for easy
re-lamping.
Reflector
Finish
The luminaire is in a powder painted
white finish.
Approvals
Approved to CSA and UL standards.
The reflector is high reflectance aluminum
for optimum lighting performance and
efficiency.
Dimensions
47.98in
1218.7mm
46.76in
1187.7mm
4.54in
115.2mm
4.96in
126mm
47.75in
1212.8mm
22.76in
578.1mm
23.75in
603.3mm
CROSS SECTION
.875in
22.2mm
EMT ACCESS
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRG2X4 - Cleanroom
Project
Cleanroom
CRG2X4 - Cleanroom
Project
Recessed Grid Cleanroom Luminaire
with Door Frame T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRG2X4 series by Certolux is a specification-grade, luminaire which
provides a cost-effective fluorescent Cleanroom lighting solution. The model
3522 is designed as a lay-in unit. The housing flange facilitates easing
sealing to the ceiling grid. It is suitable for ISO Class 5 - 8 Cleanrooms.
Available in 2x4 configurations.
3522
Ordering
G
CR
Series
2X4
3522
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
4L
6L
2x4
Door/Housing
Gauge
Mount
Type
G - Grid (T-Bar)
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
T8
Type
Voltage
120
277
347
UNV
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp Watts
Nom. Lamp Watts
2x4
T5
T5HO
28
54
(4,6
(4 lamps)
lamps)
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
- 120V
- 277V
- 347V
- 120-277V
Options
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
T8
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
32
(4,6
lamps)
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Flanged Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Clean Rooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIF1X4 series by Certolux is a specification-grade, recessed flanged
inset door luminaire for ISO Class 5 - 8 Cleanrooms. Available in 1x4
configurations.
3463
ProductSpecifications
Housing
Lens and Lens Retention
Door Frame Gasket
Precision formed, TIG welded, one piece
20 gauge cold rolled steel housing.
Welded and PEM studs are used in order
to mount components.
The lamp compartment is protected by a
.125” pattern 12 lens. The lens is secured
with adjustable Z style brackets with weld
studs on housing faceplate. Lens is
sealed to the door frame with silicone
sealant. Other lens options available.
(see product ordering guide)
The extruded silicone based gasket seals
the door frame to the housing.
Door Frame
Approvals
Mounting
The housing is supported by two yoke
style mounting brackets.
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
One piece door frame, fabricated from 18
gauge, cold rolled steel with TIG welded
corners. It is retained by stainless steel
aircraft cables. Specialized, military
grade, flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Dimensions
Finish
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts. Sufficient knockouts are
provided for connections and through
wiring.
47.99in
1218.95mm
10.13in
257.18mm
4.59in
116.51mm
50.85in
1291.64mm
CROSS SECTION
48.38in
1229.0mm
WIRING HOLE
(4) MOUNTING HOLES
12.98in
329.62mm
10.63in
270.0mm
RECOMMENDED CEILING CUT-OUT
TOP VIEW
YOKE NOT SHOWN
Cleanroom
CRIF1X4 - Cleanroom
Project
Cleanroom
CRIF1X4 - Cleanroom
Project
Recessed Flanged Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Clean Rooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIF1X4 series by Certolux is a specification-grade, recessed flanged
inset door luminaire for ISO Class 5 - 8 Cleanrooms. Available in 1x4
configurations.
3463
Ordering
CR
IF
Series
1X4
3463
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
1L
2L
3L
1x4
Mount
Type
Door/Housing
Gauge
IF - Inset Door Flange
A
E
H
L
P
- 18 Ga. CRS (Painted)*
- 18 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
T8
T5HO
Size
T5
1x4
28
(1,2 or
3 lamps)
54
(2 lamps
max)
+ T5HO Lamps only
32
(1,2 or
3 lamps)
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
T8
Type
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M37 Mounting Plaster Frame Kit (Stainless #304)
M38 Mounting Plaster Frame Kit (Stainless #316)
M40 Mounting Safety Lens Tether Stainless Steel
M42 Mounting Swing Out Arms
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Fusing and Breaker Options
T5
T6
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X5
X7
X8
NSF (National Sanitation Foundation)
Dual CSA/USA
IP65 Rated
Lamp Options
Z1 Lamps Installed (Specify Type)
Recessed Flanged Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIF2X2 series by Certolux is a specification-grade, recessed flanged,
inset door, Cleanroom luminaire, for ISO Class 5 - 8 Cleanrooms. Available
in 2x2 configurations.
3463
ProductSpecifications
Housing
Lens and Lens Retention
Door Frame Gasket
Precision formed, TIG welded, one piece
20 gauge cold rolled steel housing.
Welded and PEM studs are used in order
to mount components.
The lamp compartment is protected by a
.125” pattern 12 lens. The lens is secured
with adjustable Z style brackets with weld
studs on housing faceplate. Lens is
sealed to the door frame with silicone
sealant. Other lens options available.
(see product ordering guide)
The extruded foam based gasket seals
the door frame to the housing.
Mounting
The housing is supported by two yoke
style mounting brackets.
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
The luminaire is in a polyester powder
painted white finish.
Approvals
Approved to CSA and UL standards.
Door Frame
Reflector
Finish
One piece door frame, fabricated from 18 Electrical
All electrical components are CSA or UL
gauge, cold rolled steel with TIG welded
approved. See product ordering guide for
corners. It is retained by stainless steel
optional ballasts.
aircraft cables. Specialized, military
grade, flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
24.00in
609.60mm
Dimensions
22.13in
561.98mm
26.85in
682.04mm
4.59in
116.54mm
(4) MOUNTING HOLES
CROSS SECTION
WIRING HOLE
24.38in
619.1mm
24.98in
634.42mm
22.63in
575.0mm
RECOMMENDED CEILING CUT-OUT
TOP VIEW
YOKE NOT SHOWN
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRIF2X2 - Cleanroom
Project
Cleanroom
CRIF2X2 - Cleanroom
Project
Recessed Flanged Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIF2X2 series by Certolux is a specification-grade, recessed flanged,
inset door, Cleanroom luminaire, for ISO Class 5 - 8 Cleanrooms. Available
in 2x2 configurations.
3463
Ordering
CR
IF
Series
2X2
3463
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
2x2
Door/Housing
Gauge
2L
3L
4L
6L
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Mount
Type
IF - Inset Door Flange
Lamp
Type
Lamp
Watts
120
277
See Table
T5
347
below
T5HO
Ballast UNV
T8
UN4
Type
PLL
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp Watts
Nom. Lamp Watts
T8
T5HO
T5
2x2
14
(2,3,4 or
6 lamps)
24
(4 lamps
max)
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M37 Mounting Plaster Frame Kit (Stainless #304)
M38 Mounting Plaster Frame Kit (Stainless #316)
M40 Mounting Safety Lens Tether Stainless Steel
M42 Mounting Swing Out Arms
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
Voltage
PLL
17
40, 50, 55
(2,3,4 or (4 lamps
6 lamps)
max.)
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
+ T5HO Lamps only
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Flanged Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIF2X4 series by Certolux is a specification-grade, recessed flanged,
inset door Cleanroom luminaire, for ISO Class 5 - 8 Cleanrooms. Available
in 2x4 configurations.
3463
ProductSpecifications
Housing
Lens and Lens Retention
Door Frame Gasket
Precision formed, TIG welded, one piece
20 gauge cold rolled steel housing.
Welded and PEM studs are used in order
to mount components.
The lamp compartment is protected by a
.125” pattern 12 lens. The lens is secured
with adjustable Z style brackets with weld
studs on housing faceplate. Lens is
sealed to the door frame with silicone
sealant. Other lens options available.
(see product ordering guide)
The extruded silicone based gasket seals
the door frame to the housing.
Door Frame
Approvals
Mounting
The housing is supported by two yoke
style mounting brackets.
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
Dimensions
One piece door frame, fabricated from 18
gauge, cold rolled steel with TIG welded
corners. It is retained by stainless steel
aircraft cables. Specialized, military
grade, flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Finish
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts.
48.00in
1219.20mm
22.13in
561.98mm
4.59in
116.54mm
50.85in
1291.64mm
CROSS SECTION
(4) MOUNTING HOLES
WIRING HOLE
48.38in
1229.0mm
24.98in
634.42mm
22.63in
575.0mm
RECOMMENDED CEILING CUT-OUT
TOP VIEW
YOKE NOT SHOWN
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRIF2X4 - Cleanroom
Project
Cleanroom
CRIF2X4 - Cleanroom
Project
Recessed Flanged Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIF2X4 series by Certolux is a specification-grade, recessed flanged,
inset door Cleanroom luminaire, for ISO Class 5 - 8 Cleanrooms. Available
in 2x4 configurations.
3463
Ordering
CR
IF
Series
2X4
3463
Size
(Width x
Length)
Model
No. of
of
No.
Lamps
Lamps
2x4
Door/Housing
Gauge
Mount
Type
IF - Inset Door Flange
-
/
2L
3L
4L
6L
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
T8
Type
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
R - Rapid Start
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Size
2x4
T5
Nom. Lamp Watts
T8
T5HO
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M37 Mounting Plaster Frame Kit (Stainless #304)
M38 Mounting Plaster Frame Kit (Stainless #316)
M40 Mounting Safety Lens Tether Stainless Steel
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
28
32
54
(2,3,4 or (3,4 or 6
(2,3,4 or
6 lamps) lamps max) 6 lamps)
+ T5HO Lamps only
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Flanged Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Clean Rooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIF1X4 series by Certolux is a specification-grade, recessed flanged
inset door luminaire for ISO Class 5 - 8 Cleanrooms. Available in 1x4
configurations.
3579
ProductSpecifications
Housing
Lens and Lens Retention
Door Frame Gasket
Precision formed, TIG welded, one piece
20 gauge cold rolled steel housing.
Welded and PEM studs are used in order
to mount components.
The lamp compartment is protected by a
.125” pattern 12 lens. The lens is secured
with adjustable Z style brackets with weld
studs on housing faceplate. Lens is
sealed to the door frame with silicone
sealant. Other lens options available.
(see product ordering guide)
The extruded silicone based gasket seals
the door frame to the housing.
Door Frame
Approvals
Mounting
The housing is supported by swing style
mounting brackets.
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
One piece door frame, fabricated from 18
gauge, cold rolled steel with TIG welded
corners. It is retained by stainless steel
aircraft cables. Specialized, military
grade, flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Finish
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts. Sufficient knockouts are
provided for connections and through
wiring.
Dimensions
48.00in
1219.1mm
8.86in
225.1mm
5.21in
132.3mm
49.33in
1253mm
WIRING ACCESS
11.06in
281mm
CROSS SECTION
12.70in
322.5mm
TOP VIEW
Cleanroom
CRIF1X4 - Cleanroom
Project
Cleanroom
CRIF1X4 - Cleanroom
Project
Recessed Flanged Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Clean Rooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIF1X4 series by Certolux is a specification-grade, recessed flanged
inset door luminaire for ISO Class 5 - 8 Cleanrooms. Available in 1x4
configurations.
3579
Ordering
CR
IF
Series
1X4
3579
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
1L
2L
3L
1x4
Mount
Type
Door/Housing
Gauge
IF - Inset Door Flange
A
E
H
L
P
- 18 Ga. CRS (Painted)*
- 18 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
T8
T5HO
Size
T5
1x4
28
(1,2 or
3 lamps)
54
(2 lamps
max)
+ T5HO Lamps only
32
(1,2 or
3 lamps)
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
T8
Type
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M37 Mounting Plaster Frame Kit (Stainless #304)
M38 Mounting Plaster Frame Kit (Stainless #316)
M40 Mounting Safety Lens Tether Stainless Steel
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Fusing and Breaker Options
T5
T6
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X5
X7
X8
NSF (National Sanitation Foundation)
Dual CSA/USA
IP65 Rated
Lamp Options
Z1 Lamps Installed (Specify Type)
Recessed Inset Door Cleanroom Luminaire
PLL Lamps
Suitable for ISO Class 6 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIG2X2 series by Certolux is a specification-grade, luminaire which provides a
cost-effective fluorescent Cleanroom lighting solution. The model 3494 is designed
as a lay-in unit with the dimensional width of a standard HEPA filter which allows for a
consistent ceiling grid spacing for both luminaires and filters. The housing flange
facilitates easing sealing to the ceiling grid.
3494
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing, code
gauge cold rolled steel welded
construction. Holes are provided on
single piece end plates for chain
mounting support to building structure.
The lamp compartment is protected by a
clear polycarbonate lens with an option
pattern 12 overlay. The lens is secured
with adjustable Z style brackets with
through studs on housing faceplate. Clear
tempered glass lens optional see ordering
guide.
All electrical components are CSA or UL
approved. Rotary lock lamp holders
provided ensure positive lamp retention.
Standard electronic ballasts are
programmed or rapid start, with a THD of
less than 20%. Luminaires are provided
standard with cord and plug and sealed
connector(120v) to facilitate wiring to
external power source(No plug for other
voltages) Note: Cord connection not
supplied for US market. Ballast
disconnects are standard for easy ballast
maintenance.
Door Frame
Single piece precision die formed, code
gauge cold rolled steel painted to match
housing. Stainless steel acorn style
fasteners and safety cable allow for easy
re-lamping.
Reflector
The reflector is high reflectance aluminum
for optimum lighting performance and
efficiency.
Finish
The luminaire is in a powder painted
white finish.
Approvals
Approved to CSA and UL standards.
Photometrics
Efficiency of Cat No CRG2x22LPLL36P120 = 48% for additional
photometric information visit
www.certolux.com
Dimensions
23.63in
600.1mm
3.81in
96.9mm
23.63in
600.1mm
CROSS SECTION
.875in
22.2mm
EMT ACCESS
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRIG2X2 - Cleanroom
Project
Cleanroom
CRIG2X2 - Cleanroom
Project
Recessed Inset Door Cleanroom Luminaire
PLL Lamps
Suitable for ISO Class 6 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIG2X2 series by Certolux is a specification-grade, luminaire which provides a
cost-effective fluorescent Cleanroom lighting solution. The model 3494 is designed
as a lay-in unit with the dimensional width of a standard HEPA filter which allows for a
consistent ceiling grid spacing for both luminaires and filters. The housing flange
facilitates easing sealing to the ceiling grid.
3494
Ordering
CR
IG
Series
2X2
3494
Size
(Width x
Length)
Model
/
2L No. of
of
No.
Lamps
Lamps
2L
2x2
Door/Housing
Gauge
Mount
Type
IG - Inset Door Grid
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Lamp
Type
PLL
Lamp
Watts
See Table
below
Ballast
Type
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
R - Rapid Start
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Size
Nom. Lamp Watts
PLL/Biax
2x2
40, 50, 55
(4 lamps
max.)
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
+ PLL 50 and 55 Lamps only
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Inset Door Cleanroom Luminaire
T5, T5HO Lamps
Suitable for ISO Class 6 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIG2X4 series by Certolux is a specification-grade, luminaire which provides a
cost-effective fluorescent Cleanroom lighting solution. The model 3494 is designed
as a lay-in unit with the dimensions of a standard HEPA filter which allows for a
consistent ceiling grid spacing for both luminaires and filters. The housing flange
facilitates easing sealing to the ceiling grid.
3494
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing, code
gauge cold rolled steel welded
construction. Holes are provided on
single piece end plates for chain
mounting support to building structure.
The lamp compartment is protected by a
clear polycarbonate lens with an option
pattern 12 overlay. The lens is secured
with adjustable Z style brackets with
through studs on housing faceplate. Clear
tempered glass lens optional see ordering
guide.
All electrical components are CSA or UL
approved. Rotary lock lamp holders
provided ensure positive lamp retention.
Standard electronic ballasts are
programmed or rapid start, with a THD of
less than 20%. Luminaires are provided
standard with cord and plug and sealed
connector(120v) to facilitate wiring to
external power source(No plug for other
voltages) Note: Cord connection not
supplied for US market. Ballast
disconnects are standard for easy ballast
maintenance.
Door Frame
Single piece precision die formed, code
gauge cold rolled steel painted to match
housing. Stainless steel acorn style
fasteners and safety cable allow for easy
re-lamping.
Finish
The luminaire is in a powder painted
white finish.
Approvals
Reflector
The reflector is high reflectance aluminum
for optimum lighting performance and
efficiency.
Approved to CSA and UL standards.
Photometrics
Efficiency of Cat No CRG2X44LT528P120 = 65% for additional
photometric information visit
www.certolux.com
Dimensions
47.62in
1209.5mm
3.81in
96.9mm
23.63in
600.1mm
CROSS SECTION
.875in
22.2mm
EMT ACCESS
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRIG2X4 - Cleanroom
Project
Cleanroom
CRIG2X4 - Cleanroom
Project
Recessed Inset Door Cleanroom Luminaire
T5, T5HO Lamps
Suitable for ISO Class 6 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIG2X4 series by Certolux is a specification-grade, luminaire which provides a
cost-effective fluorescent Cleanroom lighting solution. The model 3494 is designed
as a lay-in unit with the dimensions of a standard HEPA filter which allows for a
consistent ceiling grid spacing for both luminaires and filters. The housing flange
facilitates easing sealing to the ceiling grid.
3494
Ordering
CR
G
Series
2X4
3494
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
4L
6L
2x4
Door/Housing
Gauge
Mount
Type
IG - Inset Door Grid
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
Type
Voltage
120
277
347
UNV
UN4
P - Prog. Start
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Lamp Watts
Nom. Lamp Watts
T5
T5HO
2x4
28
54
(2,3,4 or (3,4 or 6
6 lamps) lamps max)
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
+ T5HO Lamps only
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Grid Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIG1X4 series by Certolux is a specification-grade, recessed T-Bar,
inset door, Cleanroom luminaire, for ISO Class 5 - 8 Cleanrooms. Available
in 1x4 configurations.
3558
ProductSpecifications
Housing
Lens and Lens Retention
Door Frame Gasket
Precision formed, TIG welded, one piece
20 gauge cold rolled steel housing.
Welded and PEM studs are used in order
to mount components.
The lamp compartment is protected by a
.125” pattern 12 lens. The lens is secured
with adjustable Z style brackets with weld
studs on housing faceplate. Lens is
sealed to the door frame with silicone
sealant. Other lens options available.
(see product ordering guide)
The extruded silicone based gasket seals
the door frame to the housing.
Door Frame
Approvals
Mounting
T-Bar mounted and supplied with tabbed
holes for independent chain support.
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
One piece door frame, fabricated from 18
gauge, cold rolled steel with TIG welded
corners. It is retained by stainless steel
aircraft cables. Specialized, military
grade, flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Finish
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts. Sufficient knockouts are
provided for connections and through
wiring.
Dimensions
48.00in
1219.2mm
10.95in
278.1mm
47.75in
1212.9mm
.875in
22.2mm
EMT ACCESS
4.59in
116.5mm
10.66in
270.6mm
11.75in
298.5mm
CROSS SECTION
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRIG1X4 - Cleanroom
Project
Cleanroom
CRIG1X4 - Cleanroom
Project
Recessed Grid Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIG1X4 series by Certolux is a specification-grade, recessed T-Bar,
inset door, Cleanroom luminaire, for ISO Class 5 - 8 Cleanrooms. Available
in 1x4 configurations.
3558
Ordering
CR
IG
Series
1X4
3558
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
1L
2L
3L
1x4
Door/Housing
Gauge
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Mount
Type
IG - Inset Door Grid
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
T8
Type
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
R - Rapid Start
1x4
28
Nom. Lamp Watts
T8
T5HO
54
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Lamp Watts
T5
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
32
+ T5HO Lamps only
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Grid Inset Door Cleanroom Luminaire
T5, T5HO, T8, T8U6, PLL Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIG2X2 series by Certolux is a specification-grade, recessed T-Bar,
inset door, Cleanroom luminaire, for ISO Class 5 - 8 Cleanrooms. Available
in 2x2 configurations.
3558
ProductSpecifications
Housing
Lens and Lens Retention
Door Frame Gasket
Precision formed, TIG welded, one piece
20 gauge cold rolled steel housing.
Welded and PEM studs are used in order
to mount components.
The lamp compartment is protected by a
.125” pattern 12 lens. The lens is secured
with adjustable Z style brackets with weld
studs on housing faceplate. Lens is
sealed to the door frame with silicone
sealant. Other lens options available.
(see product ordering guide)
The extruded silicone based gasket seals
the door frame to the housing.
Door Frame
Approvals
Mounting
T-Bar mounted and supplied with tabbed
holes for independent chain support.
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
One piece door frame, fabricated from 18
gauge, cold rolled steel with TIG welded
corners. It is retained by stainless steel
aircraft cables. Specialized, military
grade, flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Finish
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts.
Dimensions
24.00in
609.6mm
22.95in
582.9mm
23.75in
603.3mm
4.59in
116.5mm
22.66in
575.4mm
23.75in
603.3mm
CROSS SECTION
.875in
22.2mm
EMT ACCESS
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRIG2X2 - Cleanroom
Project
Cleanroom
CRIG2X2 - Cleanroom
Project
Recessed Grid Inset Door Cleanroom Luminaire
T5, T5HO, T8, T8U6, PLL Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIG2X2 series by Certolux is a specification-grade, recessed T-Bar,
inset door, Cleanroom luminaire, for ISO Class 5 - 8 Cleanrooms. Available
in 2x2 configurations.
3558
Ordering
CR
IG
Series
2X2
3558
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
2x2
Door/Housing
Gauge
Lamp
Type
1L
2L
3L
4L
6L
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Mount
Type
IG - Inset Door Grid
Lamp
Watts
120
277
See Table
T5
347
below
T5HO
Ballast UNV
T8
UN4
Type
T8U6
PLL
N - Instant Start
P - Prog. Start
R - Rapid Start
Nom. Lamp Watts
T8
T5HO
2x2
14
(2,3,4 or
6 lamps)
24
(4 lamps
max)
17
(2,3,4 or
6 lamps)
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Lamp Watts
T5
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
Voltage
T8U6
PLL
32
(2 lamps
max.)
40, 50, 55
(4 lamps
max.)
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
+ T5HO Lamps only
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Recessed Grid Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIG1X4 series by Certolux is a specification-grade, recessed T-Bar,
inset door, Cleanroom luminaire, for ISO Class 5 - 8 Cleanrooms. Available
in 2x4 configurations.
3558
ProductSpecifications
Housing
Lens and Lens Retention
Door Frame Gasket
Precision formed, TIG welded, one piece
20 gauge cold rolled steel housing.
Welded and PEM studs are used in order
to mount components.
The lamp compartment is protected by a
.125” pattern 12 lens. The lens is secured
with adjustable Z style brackets with weld
studs on housing faceplate. Lens is
sealed to the door frame with silicone
sealant. Other lens options available.
(see product ordering guide)
The extruded silicone based gasket seals
the door frame to the housing.
Door Frame
Approvals
Mounting
T-Bar mounted and supplied with tabbed
holes for independent chain support.
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
One piece door frame, fabricated from 18
gauge, cold rolled steel with TIG welded
corners. It is retained by stainless steel
aircraft cables. Specialized, military
grade, flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Finish
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts. Sufficient knockouts are
provided for connections and through
wiring.
Dimensions
48.00in
1219.2mm
22.95in
582.9mm
.875in
22.2mm
EMT ACCESS
47.75in
1212.9mm
4.59in
116.5mm
22.66in
575.4mm
23.75in
603.3mm
CROSS SECTION
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRIG2X4 - Cleanroom
Project
Cleanroom
CRIG2X4 - Cleanroom
Project
Recessed Grid Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIG1X4 series by Certolux is a specification-grade, recessed T-Bar,
inset door, Cleanroom luminaire, for ISO Class 5 - 8 Cleanrooms. Available
in 1x4 configurations.
3558
Ordering
CR
IG
Series
2X4
3558
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
1L
2L
3L
2x4
Door/Housing
Gauge
A - 18 Ga. CRS (Painted)*
E - 18 Ga. SS #304 (Painted)
H - 18 Ga. SS #304 (#4 Brushed)**
L - 18 Ga. SS #316 (Painted)
P - 20 Ga. CRS (Painted)***
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Mount
Type
IG - Inset Door Grid
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
T8
Type
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
R - Rapid Start
2x4
28
Nom. Lamp Watts
T8
T5HO
54
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Lamp Watts
T5
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
32
+ T5HO Lamps only
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Surface Mount Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIS1X4 series by Certolux is a specification-grade, surface mounted,
inset door luminaire for use in ISO Class 5 - 8 Cleanrooms. Available in 1x4
configurations.
3525
ProductSpecifications
Housing
Lens and Lens Retention
Door Frame Gasket
Precision formed, TIG welded, one piece
20 gauge cold rolled steel housing.
Welded and PEM studs are used in order
to mount components.
The lamp compartment is protected by a
.125” pattern 12 lens. The lens is secured
with adjustable Z style brackets with weld
studs on housing faceplate. Lens is
sealed to the door frame with silicone
sealant. Other lens options available.
(see product ordering guide)
The extruded silicone based gasket seals
the door frame to the housing.
Door Frame
Approvals
Mounting
The housing is supplied with mounting
holes and a knockout for wiring. (See
Dimension section for details)
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
One piece door frame, fabricated from 18
gauge, cold rolled steel with TIG welded
corners. It is retained by stainless steel
aircraft cables. Specialized, military
grade, flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Finish
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts.
Dimensions
10.16in
258mm
47.71in
DOOR FRAME
1211.8mm
4.60in
116.8mm
48.00in
1219.2mm
9.86in
250.5mm
CROSS SECTION
36.00in
914.4mm
.875in
22.2mm
EMT ACCESS
8.00in
203.2mm
.313in
7.9mm
MOUNTING HOLES
(4)
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRIS1X4 - Cleanroom
Project
Cleanroom
CRIS1X4 - Cleanroom
Project
Surface Mount Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIS1X4 series by Certolux is a specification-grade, surface mounted,
inset door luminaire for use in ISO Class 5 - 8 Cleanrooms. Available in 1x4
configurations.
3525
Ordering
CR
IS
Series
1X4
3525
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
1L
2L
3L
1x4
Mount
Type
Door/Housing
Gauge
IS - Inset Door Surface
A
E
H
L
P
- 18 Ga. CRS (Painted)*
- 18 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)***
Lamp
Type
Lamp
Watts
N - Instant Start
P - Prog. Start
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Fusing and Breaker Options
Nom. Lamp Watts
T8
T5HO
28
(1,2 or
3 lamps)
54
(2 lamps
max)
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Lamp Watts
1x4
Options
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
T5
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Size
Voltage
120
277
See Table
T5
347
below
T5HO
Ballast UNV
T8
UN4
Type
T5
T6
32
(1,2 or
3 lamps)
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
+ T5HO Lamps only
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Surface Mount Inset Door Cleanroom Luminaire
T5, T5HO, T8, PLL Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIS2X2 series by Certolux is a specification-grade, surface mounted,
inset door luminaire for use in ISO Class 5 - 8 Cleanrooms. Available in 2x2
configurations.
3525
ProductSpecifications
Housing
Lens and Lens Retention
Door Frame Gasket
Precision formed, TIG welded, one piece
20 gauge cold rolled steel housing.
Welded and PEM studs are used in order
to mount components.
The lamp compartment is protected by a
.125” pattern 12 lens. The lens is secured
with adjustable Z style brackets with weld
studs on housing faceplate. Lens is
sealed to the door frame with silicone
sealant. Other lens options available.
(see product ordering guide)
The extruded silicone based gasket seals
the door frame to the housing.
Door Frame
Approvals
Mounting
The housing is supplied with mounting
holes and a knockout for wiring. (See
Dimension section for details)
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
One piece door frame, fabricated from 18
gauge, cold rolled steel with TIG welded
corners. It is retained by stainless steel
aircraft cables. Specialized, military
grade, flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Finish
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts.
Dimensions
22.16in
562.8mm
4.60in
116.8mm
23.71in DOOR FRAME
602.2mm
21.86in
555.3mm
12.00in
304.8mm
CROSS SECTION
.875in
22.2mm
EMT ACCESS
16.00in
406.4mm
(4)
.313in
7.9mm
MOUNTING HOLES
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRIS2X2 - Cleanroom
Project
Cleanroom
CRIS2X2 - Cleanroom
Project
Surface Mount Inset Door Cleanroom Luminaire
T5, T5HO, T8, PLL Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIS2X2 series by Certolux is a specification-grade, surface mounted,
inset door luminaire for use in ISO Class 5 - 8 Cleanrooms. Available in 2x2
configurations.
3525
Ordering
CR
IS
Series
2X2
3525
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
2x2
Mount
Type
Door/Housing
Gauge
IS - Inset Door Surface
A
E
H
L
P
2L
3L
4L
6L
- 18 Ga. CRS (Painted)*
- 18 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)***
Lamp
Type
Lamp
Watts
2x2
14
24
17
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Fusing and Breaker Options
Lamp Watts
Nom. Lamp Watts
T8
T5HO
Options
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
T5
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Size
Voltage
120
277
See Table
T5
347
below
T5HO
Ballast UNV
T8
UN4
Type
PLL
N - Instant Start
P - Prog. Start
R - Rapid Start
PLL
T5
T6
40, 50, 55
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
+ T5HO Lamps only
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Surface Mount Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIS2X4 series by Certolux is a specification-grade, surface mounted,
inset door luminaire for use in ISO Class 5 - 8 Cleanrooms. Available in 2x4
configurations.
3525
ProductSpecifications
Housing
Lens and Lens Retention
Door Frame Gasket
Precision formed, TIG welded, one piece
20 gauge cold rolled steel housing.
Welded and PEM studs are used in order
to mount components.
The lamp compartment is protected by a
.125” pattern 12 lens. The lens is secured
with adjustable Z style brackets with weld
studs on housing faceplate. Lens is
sealed to the door frame with silicone
sealant. Other lens options available.
(see product ordering guide)
The extruded silicone based gasket seals
the door frame to the housing.
Door Frame
Approvals
Mounting
The housing is supplied with mounting
holes and a knockout for wiring. (See
Dimension section for details)
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
One piece door frame, fabricated from 18
gauge, cold rolled steel with TIG welded
corners. It is retained by stainless steel
aircraft cables. Specialized, military
grade, flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Finish
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts.
Dimensions
22.16in
562.8mm
4.60in
116.8mm
21.86in
555.3mm
47.71in
DOOR FRAME
1211.8mm
CROSS SECTION
36.00in
914.4mm
.875in
22.2mm
EMT ACCESS
16.00in
406.4mm
(4) .313in
7.9mm
MOUNTING HOLES
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRIS2X4 - Cleanroom
Project
Cleanroom
CRIS2X4 - Cleanroom
Project
Surface Mount Inset Door Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRIS2X4 series by Certolux is a specification-grade, surface mounted,
inset door luminaire for use in ISO Class 5 - 8 Cleanrooms. Available in 2x4
configurations.
3525
Ordering
CR
IS
Series
2X4
3525
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
2L
3L
4L
2x4
Mount
Type
Door/Housing
Gauge
IS - Inset Door Surface
A
E
H
L
P
- 18 Ga. CRS (Painted)*
- 18 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)***
Lamp
Type
Lamp
Watts
N - Instant Start
P - Prog. Start
28
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
Fusing and Breaker Options
Nom. Lamp Watts
T8
T5HO
54
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Lamp Watts
2x4
Options
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
T5
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
* Standard Door Frame Material
** Not Available as Housing Material
*** Standard Housing Material
Size
Voltage
120
277
See Table
T5
347
below
T5HO
Ballast UNV
T8
UN4
Type
T5
T6
32
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
+ T5HO Lamps only
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Surface Mount Overlapping Door 1X4 Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRS1X4 series by Certolux is a specification-grade luminaire for
Cleanroom application. The overlapping single piece door design provides
for a continuous seal to the sealed housing. The luminaire can be ceiling or
wall mounted. Manufactured to IP65 and is available in 1x4 configurations.
3555
ProductSpecifications
Housing
Door Frame
Reflector
Precision formed, TIG welded, one piece
18 gauge cold rolled steel housing.
Welded studs are used in order to mount
components, offering superior
performance over PEM style fasteners.
One piece 60° beveled perimeter door
frame, fabricated from 18 gauge, cold
rolled steel with TIG welded corners. It is
retained by stainless steel aircraft cable
when opened. Specialized, military grade,
flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
Mounting
Mounting holes are provided on the back
of the housing.
Lens and Lens Retention
The standard lens assembly is made with
a tempered safety glass sealed to the
lens frame with a non-silicone sealant
Door Frame Gasket
together with an overlay of a pattern #12
Custom shaped, extruded closed cell
acrylic lens, mechanically secured. Other
silicone gasketing is used throughout to
lens options available. (see product
ensure precise, seals between door
ordering guide)
assembly and housing. Vulcanized
corners ensure continuity of the seal on
the frame gasket. Continuous retentionmounts mechanically secure and evenly
distribute force against both gasketing
and diffuser.
Finish
The luminaire is in a polyester powder
painted white finish.
Approvals
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts.
Dimensions
48.00in
1219.2mm
11.69in
296.9mm
47.62in
1209.5mm
4.31in
109.5mm
4.65in
118.1mm
11.31in
287.3mm
36.00in
914.4mm
CROSS SECTION
8.00in
203.2mm
.313in
7.9mm
MOUNTING HOLES
.875in
22.2mm
EMT ACCESS
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRS1X4 - Cleanroom
Project
Cleanroom
CRS1X4 - Cleanroom
Project
Surface Mount Overlapping Door 1X4 Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRS1X4 series by Certolux is a specification-grade luminaire for
Cleanroom application. The overlapping single piece door design provides
for a continuous seal to the sealed housing. The luminaire can be ceiling or
wall mounted. Manufactured to IP65 and is available in 1x4 configurations.
3555
Ordering
S
CR
Series
1X4
3555
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
1L
2L
3L
1x4
Mount
Type
Door/Housing
Gauge
S - Surface
A
E
H
L
- 18 Ga. CRS (Painted)*
- 18 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)
- 18 Ga. SS #316 (Painted)
Lamp
Type
Lamp
Watts
See Table
T5
T5HO below
Ballast
T8
Type
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
R - Rapid Start
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
T8
T5HO
T5
1x4
28
(1,2 or
3 lamps)
54
(2 lamps
max)
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M40 Mounting Safety Lens Tether Stainless Steel
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay (Std)
* Standard Door Frame Material
* Standard Housing Material
Size
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Fusing and Breaker Options
T5
T6
32
(1,2 or
3 lamps)
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
+ T5HO Lamps only
Approvals Options
X7 Dual CSA/USA
X8 IP65 Rated
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Surface Mount 2x2 Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRS2X2 series by Certolux is a specification-grade, surface mount,
overlapping door, IP65 luminaire, for ISO Class 5 - 8 Cleanrooms. The
overlapping single piece door design provides for a continuous seal to the
sealed housing. The luminaire can be ceiling or wall mounted.
3555
ProductSpecifications
Housing
Door Frame
Reflector
Precision formed, TIG welded, one piece
18 gauge cold rolled steel housing.
Welded studs are used in order to mount
components, offering superior
performance over PEM style fasteners.
One piece 60° beveled perimeter door
frame, fabricated from 18 gauge, cold
rolled steel with TIG welded corners. It is
retained by stainless steel aircraft cable
when opened. Specialized, military grade,
flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
Mounting
Mounting holes are provided on the back
of the housing.
Lens and Lens Retention
The standard lens assembly is made with
a tempered safety glass sealed to the
lens frame with a non-silicone sealant
Door Frame Gasket
together with an overlay of a pattern #12
Custom shaped, extruded closed cell
acrylic lens, mechanically secured. Other
silicone gasketing is used throughout to
lens options available. (see product
ensure precise, seals between door
ordering guide)
assembly and housing. Vulcanized
corners ensure continuity of the seal on
the frame gasket. Continuous retentionmounts mechanically secure and evenly
distribute force against both gasketing
and diffuser.
Finish
The luminaire is in a polyester powder
painted white finish.
Approvals
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts.
Dimensions
24.00in
609.6mm
23.69in
601.7mm
23.62in
600mm
4.65in
118.1mm
4.31in
109.5mm
23.31in
592.1mm
CROSS SECTION
.875in
22.2mm
EMT ACCESS
14.00in
355.6mm
.313in
7.9mm
MOUNTING HOLES
12.00in
304.8mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRS2X2 - Cleanroom
Project
Cleanroom
CRS2X2 - Cleanroom
Project
Surface Mount 2x2 Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRS2X2 series by Certolux is a specification-grade, surface mount,
overlapping door, IP65 luminaire, for ISO Class 5 - 8 Cleanrooms. The
overlapping single piece door design provides for a continuous seal to the
sealed housing. The luminaire can be ceiling or wall mounted.
3555
Ordering
CR
S
Series
2X2
3555
Size
(Width x
Length)
Model
-
/
No. of
of
No.
Lamps
Lamps
2L
3L
4L
2x2
Door/Housing
Gauge
A
E
H
L
Mount
Type
S - Surface
- 18 Ga. CRS (Painted)*
- 18 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)
- 18 Ga. SS #316 (Painted)
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
T8
Type
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp Watts
2x2
T5
14
Nom. Lamp Watts
T8
T5HO
24
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M37 Mounting Plaster Frame Kit (Stainless #304)
M38 Mounting Plaster Frame Kit (Stainless #316)
M40 Mounting Safety Lens Tether Stainless Steel
M42 Mounting Swing Out Arms
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
* Standard Door Frame Material
* Standard Housing Material
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
17
Fusing and Breaker Options
+ T5HO Lamps only
T5
T6
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
X8 IP65 Rated
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Surface Mount 2x4 Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRS2X4 series by Certolux is a specification-grade, surface mount,
overlapping door, IP65 luminaire, for ISO Class 5 - 8 Cleanrooms. The
overlapping single piece door design provides for a continuous seal to the
sealed housing. The luminaire can be ceiling or wall mounted.
3555
ProductSpecifications
Housing
Door Frame
Reflector
Precision formed, TIG welded, one piece
18 gauge cold rolled steel housing.
Welded studs are used in order to mount
components, offering superior
performance over PEM style fasteners.
One piece 60° beveled perimeter door
frame, fabricated from 18 gauge, cold
rolled steel with TIG welded corners. It is
retained by stainless steel aircraft cable
when opened. Specialized, military grade,
flat head, stainless steel, captive
fasteners with integral silicone o-rings
easily secure door frame to housing
through use of floating cage nuts. Silicone
o-rings offer superior performance and
longer life over comparable teflon
bushings.
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
Mounting
Mounting holes are provided on the back
of the housing.
Lens and Lens Retention
The standard lens assembly is made with
a tempered safety glass sealed to the
lens frame with a non-silicone sealant
Door Frame Gasket
together with an overlay of a pattern #12
Custom shaped, extruded closed cell
acrylic lens, mechanically secured. Other
silicone gasketing is used throughout to
lens options available. (see product
ensure precise, seals between door
ordering guide)
assembly and housing. Vulcanized
corners ensure continuity of the seal on
the frame gasket. Continuous retentionmounts mechanically secure and evenly
distribute force against both gasketing
and diffuser.
Finish
The luminaire is in a polyester powder
painted white finish.
Approvals
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts.
Dimensions
48.00in
1219.2mm
23.69in
601.7mm
47.62in
1209.6mm
4.65in
118.1mm
4.31in
109.5mm
23.31in
592.1mm
CROSS SECTION
14.00in
355.6mm
.875in
22.2mm
EMT ACCESS
.313in
7.9mm
MOUNTING HOLES
36.00in
914.4mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRS2X4 - Cleanroom
Project
Cleanroom
CRS2X4 - Cleanroom
Project
Surface Mount 2x4 Cleanroom Luminaire
T5, T5HO, T8 Lamps
Suitable for ISO Class 5 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRS2X4 series by Certolux is a specification-grade, surface mount,
overlapping door, IP65 luminaire, for ISO Class 5 - 8 Cleanrooms. The
overlapping single piece door design provides for a continuous seal to the
sealed housing. The luminaire can be ceiling or wall mounted.
3555
Ordering
CR
S
Series
2X4
3555
Size
(Width x
Length)
Model
No. of
of
No.
Lamps
Lamps
2x4
Door/Housing
Gauge
A
E
H
L
Mount
Type
S - Surface
-
/
2L
3L
4L
6L
- 18 Ga. CRS (Painted)*
- 18 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)
- 18 Ga. SS #316 (Painted)
Lamp
Type
Lamp
Watts
See Table
T5
below
T5HO
Ballast
T8
Type
Voltage
120
277
347
UNV
UN4
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp Watts
2x4
T5
28
Nom. Lamp Watts
T8
T5HO
54
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M37 Mounting Plaster Frame Kit (Stainless #304)
M38 Mounting Plaster Frame Kit (Stainless #316)
M40 Mounting Safety Lens Tether Stainless Steel
M42 Mounting Swing Out Arms
Lens Options
P05 .125 Clear Acrylic
P45 .125 Clear Polycarbonate
P13 .125 Prismatic Acrylic - P12
P16 .125 Prismatic Polycarbonate - P12
P15 .140 Prismatic High Impact Acrylic - P12
P11 .156 Prismatic Acrylic - P19
P18 UV Filtering
P06 .125 Clear Tempered Glass
P43 .187 Prismatic Polycarbonate - P12
P44 .156 Prismatic Tempered Glass
P49 .187 Clear Tempered Glass
P14 Clear Tempered Glass with Prismatic Acrylic Overlay
* Standard Door Frame Material
* Standard Housing Material
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
32
Fusing and Breaker Options
+ T5HO Lamps only
T5
T6
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
X8 IP65 Rated
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
Laminar Air Flow Teardrop Cleanroom Luminaire
LED or T5, T5HO, T8 Lamps
Suitable for ISO Class 4 Clean Rooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRTD series by Certolux is a specification-grade, sealed luminaire
suitable for laminar air flow , for ISO Class 4 Cleanrooms. Row mounting is
achieved with optional joiner end caps. Available in nominal 2’, 3’, 4’, 6’ and
8’ configurations.
3523
ProductSpecifications
Housing
Lens
Electrical
Extruded aluminum housing with a clear
satin anodized finish. End caps are
stainless steel fastened to housing with
stainless steel fasteners.
Single piece extruded clear acrylic lens
with internal horizontal prisms.
Reflector
Drill guide on inside of housing for drilling
additional mounting holes.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Precision die formed 20 ga. CRS reflector
that also acts as a wire cover with high
reflectivity.
Mounting
Approvals
Approved to CSA and UL standards.
Dimensions
1.88in
47.6mm
4.50in
114.2mm
48.13in
1222.4mm
4.50in
114.2mm
CROSS SECTION
1.88in
47.7mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
CRTD (Tear Drop) - Cleanroom
Project
Cleanroom
CRTD (Tear Drop) - Cleanroom
Project
Laminar Air Flow Teardrop Cleanroom Luminaire
LED, or T5, T5HO, T8 Lamps
Suitable for ISO Class 4 Clean Rooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The CRTD series by Certolux is a specification-grade, sealed luminaire
suitable for laminar air flow , for ISO Class 4 Cleanrooms. Row mounting is
achieved with optional joiner end caps. Available in nominal 2’, 3’, 4’, 6’ and
8’ configurations.
Ordering
3523 1L -
CR TD
Size
(Width x
Length)
Series
Model
No. of
No.
of
Lamps
Lamps
(Cross
Lamp
Type
Section)
24
36
48
72
96
1L
Lamp
Watts
Voltage
120
277
See Table
T5
347
T5HO below
Ballast UNV
T8
UN4
Type
PLL
LED *
N - Instant Start
P - Prog. Start
R - Rapid Start
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Mount
Type
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Finish Options
F06 Snow White
TD - Tear Drop Surface
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Wiring Options
V25 Radio Frequency Filter
Reflector Options
VF1 Full (95% Reflectance) Specular
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Approvals Options
X5 NSF (National Sanitation Foundation)
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
Lamp Watts
Nom. Lamp Watts
T8
T5HO
Size
T5
24
14
24
17
36 or 72
21
39
25
48 or 96
28
54
32
+ T5HO Lamps only
* Note: For LED option please consult factory for proper driver information. Driver is remote mounted.
www.certolux.com
3523
Cleanroom
SAF - Superseal Alpha Flanged - Cleanroom
Project
Recessed Premium Flanged Overlapping Door
Cleanroom Luminaire
T5, T5HO, T8, T8U2, T8U6, and PLL Lamps
Suitable for ISO Class 4 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The SAF series by Certolux is a specification-grade, recessed flanged IP65
luminaire, for ISO Class 4 Cleanrooms. Available in 1x4, 2x2, and 2x4
configurations. For use in hazardous locations (Class 1/ Zone 2, Class 2 /
Zone 2).
ProductSpecifications
Housing
Precision formed, TIG welded, one piece 18
gauge cold rolled steel housing. Housing has
integrally formed ribs surrounding plenum
access cover opening in order to ensure
integrity of seal. Welded studs are used in order
to mount components, offering superior
performance over PEM style fasteners.
Mounting
Swing arm mounting brackets, with vertical
adjustability, are used to mount the fixture
against the ceiling. Brackets provide an
improved continuous seal to plenum eliminating
fixture distortion.
Reflector
Optional VF1 reflectors are available which are
made of specular anodized aluminum with a
minimum reflectivity of 95% (see product
ordering guide).
Door Frame
Lens and Lens Retention
One piece 60° beveled perimeter door frame,
fabricated from 18 gauge, cold rolled steel with
TIG welded corners. The door assembly is self
centering by means of locating studs. It is
retained by stainless steel aircraft cable when
opened. Specialized, military grade, flat head,
stainless steel, captive fasteners with integral
silicone o-rings easily secure door frame to
housing through use of floating cage nuts.
Silicone o-rings offer superior performance and
longer life over comparable teflon bushings.
Protective stops prevent the fasteners from
being over-tightened and bending the lens door
frame. Custom shaped, extruded closed cell
silicone gasketing is used throughout to ensure
precise, redundant seals between door
assembly, housing and plenum. Vulcanized
corners ensure continuity of the seal on the
frame gasket. Continuous retention-mounts
mechanically secure and evenly distribute force
against both gasketing and diffuser.
The standard lens assembly is made with a
tempered safety glass sealed to the lens frame
with a non-silicone sealant together with an
overlay of a pattern #12 acrylic lens,
mechanically secured.
Dimensions
Finish
The luminaire is in a polyester powder painted
white finish.
Approvals
Approved to CSA and UL standards.
Electrical
All electrical components are CSA or UL
approved. See product ordering guide for
optional ballasts. Sufficient knockouts are
provided for connections and through wiring.
Photometrics
Efficiency of Cat No SAF2X44LT832 = 69.4%
for additional photometric information visit
www.certolux.com
E
4 7/8”
End View
2’x 4’
1’x 4’
2’x 2’
A
4 7/8”
C
Side View
A
D
E
A
D
E
A
D
E
F
F
G
C B
Ø
7/8” K.O.
7/8ӯK.O.
Top View
Ø
7/8” K.O.
G
2’x 2’
C B C
Top View
Top View
2’x 4’
1’x 4’
F
G
Access
Opening
Access
Opening
MODEL
NOMINAL
LENGTH
A
B
C
D
E
2'x4'
48"
25 5/8"
49 3/4"
48 1/16"
24"
22"
15"
33"
1'x4'
48"
13 5/8"
49 3/4"
48 1/16"
12"
10"
N/A
N/A
2'x2'
24"
25 5/8"
25 3/4"
24 1/16"
24"
22"
15"
16 7/8"
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Cleanroom
SAF - Superseal Alpha Flanged - Cleanroom
Project
Recessed Premium Flanged Overlapping Door
Cleanroom Luminaire
T5, T5HO, T8, T8U2, T8U6, and PLL Lamps
Suitable for ISO Class 4 - 8 Cleanrooms
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The SAF series by Certolux is a specification-grade, recessed flanged IP65
luminaire, for ISO Class 4 Cleanrooms. Available in 1x4, 2x2, and 2x4
configurations. For use in hazardous locations (Class 1/ Zone 2, Class 2 /
Zone 2).
Ordering
-
SAF
Series
-
No. of
Lamps
Size
(Width x
Length)
1x4
2x2
2x4
1L
2L
3L
4L
6L
Lamp
Watts
Voltage
120 - 120V
277 - 277V
347 - 347V
UNV - 120-277V
UN2 - 277-347V
UN4 - 347-480V
See Table
below
Lamp
Type
T5
T5HO
T8
T8U2
T8U6
PLL
Ballast
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp Watts
Size
Nom. Lamp Watts
T8
T8U2
PLL/
Biax
_
T5
T5HO
1x4
28
(2 lamps)
54
(2 lamps)
32
(2 lamps)
31
(2 or 4
lamps)
32
(2 lamps)
2x2
14
(2, 3 or 4
lamps)
24
(2, 3 or 4
lamps)
17
(2, 3 or 4
lamps)
31
(2, or 4
lamps)
32
(1 or 2
lamps)
40, 50, 55
(2 or 3
lamps)
28
(2,3,4
lamps)
54
(2,3,4
lamps)
32
(2,3,4
lamps)
31
(4, or 6
lamps)
32
(2 or 4
lamps)
_
2x4
T8U6
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B04 Dimming Line Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Housing Construction Options
C20 Plenum Access with Neoprene Gasketing
C21 Plenum Access with Silicone Gasketing
Door Frame Options (painted CRS is standard)
D3 Door Frame Stainless Steel (#304)
D9 Door Frame Stainless Steel (#316)
Packaging Options
Pack Bulk
K0
Mounting Options
M38 Mounting Plaster Frame Kit (Stainless Steel #316)
M40 Mounting Safety Lens Tether Stainless Steel
Lens and Shiellding Options
(Clear Tempered Glass w/Pattern 12 Prismatic Acrylic overlay is standard)
P05 Lens Clear Acrylic
P06 Lens Clear Glass Tempered
P14 Lens Clear Glass Tempered with Prismatic Acrylic Overlay
P16 Lens Prismatic Polycarbonate - P12
P18 Lens Ultra Violet Filter
Reflector Options
VF1 Reflector VF1 Specular (95% Reflectance) Aluminum
Fusing and Breaker Options (select one only)
Fuseholder, In-line Double Pole
T5
Fuseholder, In-line Single Pole
T6
Wiring Options
V25 Radio Frequency Filter
Approval and Rating Options
X1 Class 1 Zone 2(Div 2)*
X3 Class 2 Zone 2(Div 2)*
* Requires lens option P06 or P14
X4 Class 3
X5 NSF (National Sanitation Foundation)
X7 Dual CSA/USA
X8 IP65 Rated
www.certolux.com
CERTOLUX
S P E C I A LT Y LU M I N A I R E S
Medical Facilities
Reading, Ambient & Exam Luminaire
Ambient and Exam Luminaire
Hinged germ shield option for all Medical
luminaires
CERTOLUX
S P E C I A LT Y LU M I N A I R E S
www.certolux.com
Email: info@certolux.com
35 Oak Street, Toronto, Ontario M9N 1A1
Phone: 647-777-3300 Fax: 416-245-4778
MD1 - Medical Patient Exam Asymmetric
Project
Recessed Grid or Flange, or Surface Mount
Medical Patient Exam Luminaire
T5, T5HO, T8 Lamps
Type
Date
Product
Code
Approved by
The MD1 series by Certolux is a specification-grade, exam luminaire which
provides a cost effective fluorescent patient room lighting solution, for
hospitals, nursing homes and other patient care facilities. Eliminates the
need for wall mounted luminaires and is available in 1x4 configurations.
3466
ProductSpecifications
Housing
Lens
Electrical
Precision formed, code gauge cold rolled
steel. Wiring access plate or knockouts
are provided on back of housing, for
flexible conduit attachment.
The lamps are shielded by a perforated
steel powder coated white shield with an
opal acrylic overlay. Optional extruded
aluminum door frame with lens for IP65
rating (see product ordering key).
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Mounting
Surface Mount - Four .312” dia. holes
provided
Grid Mount - Holes provided for chain
mounting support to building structure,
and comes with integral earthquake clips.
Flange Mount - Yoke mounting bracket
(see product ordering key)
Finish
The luminaire is a powder painted white
finish and offers a high reflectivity coating
for improved lighting performance and
efficiency. Anti-microbial finish is also
available.
Approvals
Approved to CSA and UL standards.
Dimensions
48.00in
1219.2mm
4.07in
103.3mm
36.00in
914.4mm
(4)
.312in
7.9mm
MOUNTING HOLES
12.00in
304.8mm
CROSS SECTION
8.00in
203.2mm
(2) EMT ACCESS KNOCK-OUT
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Medical
Facility
ProductSpecifications - Application
MD1 - Medical Patient Exam Asymmetric
Project
Recessed Grid or Flange, or Surface Mount
Medical Patient Exam Luminaire
T5, T5HO, T8 Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
Medical
Facility
The MD1 series by Certolux is a specification-grade, exam luminaire which
provides a cost effective fluorescent patient room lighting solution, for
hospitals, nursing homes and other patient care facilities. Eliminates the
need for wall mounted luminaires and is available in 1x4 configurations.
3466
Ordering
MD
1
Series Type
1
1X4
3466
Size
(Width x
Length)
Model
-
/
No.
No.of
of
Lamps
Lamps
Exam
1L
2L
1x4
Mount
Type
Lamp
Type
T5
T5HO
T8
PLL
Lamp
Watts
See Table
below
Voltage
120
277
347
UNV
UN4
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Ballast
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
IF - Inset Door Flange
IG - Inset Door Grid
IS - Inset Door Surface
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D11 Extruded Aluminum with Continuous Piano Hinge
D12 Extruded Aluminum with Aircraft Safety Cable
Finish Options
F12 White Antimicrobial
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Type 1 = Exam (only)
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Mounting Options
M12 Mounting Clips - Earthquake
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V25 Radio Frequency Filter
Reflector Options
VF1 Full (95% Reflectance) Specular
Lamp Watts
Size
T5
1x4
28
Nom. Lamp Watts
T8
T5HO
54
Approvals Options
X7 Dual CSA/USA
X8 IP65 Rated
Lamp Options
Z1 Lamps Installed (Specify Type)
32
+ T5HO Lamps only
www.certolux.com
MD2-2X2- Medical Patient Ambient/Exam
Project
Recessed Ceiling or Surface Luminaire
T5, T5HO, T8 Lamps
Type
Date
Product
Code
Approved by
The MD2 series by Certolux is a specification-grade, luminaire which provides a costeffective fluorescent patient room lighting solution. Designed as a combination
Ambient/Exam light for hospitals, nursing homes and other patient care facilities.
Eliminates the need for wall mounted luminaires. The flexibility of the nominal 2’ x 2’
singular modular installation makes this an excellent ceiling-mount fixture.
3461
ProductSpecifications
Housing
Lens
Electrical
Precision formed, code gauge cold rolled
steel. Wiring access plate or knockouts
are provided on back of housing, for
flexible conduit attachment.
The exam compartment is shielded by a
clear linear prismatic acrylic lens. The
ambient compartment shield is a low
profile frosted linear internal prismatic
lens. Optional extruded aluminum door
frame with lens for IP65 rating (see
product ordering key).
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Mounting
Surface Mount - Four .312” dia. holes
provided
Grid Mount - Holes provided for chain
mounting support to building structure,
and comes with integral earthquake clips.
Flange Mount - Yoke mounting bracket
(see product ordering key)
Approvals
Approved to CSA and UL standards.
Dimensions
(2) EMT ACCESS KNOCK-OUTS
24.00in
609.6mm
5.53in
140.6mm
18.00in
457.2mm
24.00in
609.6mm
CROSS SECTION
(4)
.312in
7.9mm
MOUNTING HOLES
16.00in
406.4mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Medical
Facility
ProductSpecifications - Application
MD2-2X2 - Medical Patient Ambient/Exam
Project
Recessed Ceiling or Surface Luminaire
T5, T5HO, T8 Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
Medical
Facility
The MD2 series by Certolux is a specification-grade, luminaire which provides a costeffective fluorescent patient room lighting solution. Designed as a combination
Ambient/Exam light for hospitals, nursing homes and other patient care facilities.
Eliminates the need for wall mounted luminaires. The flexibility of the nominal 2’ x 2’
singular modular installation makes this an excellent ceiling-mount fixture.
3461
Ordering
MD
2
Series Type
2
2X2
3461
/
Size
(Width x
Length)
Model
No. of
No.
No.of
of
Lamps Lamps
Lamps
Ambient
Exam
1
2L
2
4L
2x2
Mount
Type
-
Lamp
Type
T5
T5HO
T8
Lamp
Watts
See Table
below
Voltage
120
277
347
UNV
UN4
Ballast
Type
IF - Inset Door Flange
IG - Inset Door Grid
IS - Inset Door Surface
N - Instant Start
P - Prog. Start
R - Rapid Start
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D11 Extruded Aluminum with Continuous Piano Hinge
D12 Extruded Aluminum with Aircraft Safety Cable
Finish Options
F12 White Antimicrobial
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Type 1 = Exam (only)
Type 2 = Exam and Ambient
Type 3 = Exam, Ambient and Reading
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Mounting Options
M12 Mounting Clips - Earthquake
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
V40 Low Voltage Controller
V43 Field Adjustable LED Chart/Night Light
Reflector Options
VF1 Full (95% Reflectance) Specular
Lamp Watts
Nom. Lamp Watts
Size
T5
T5HO
T8
2x2
14
24
17
+ T5HO lamps only
Approvals Options
X7 Dual CSA/USA
X8 IP65 Rated
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
MD2-2X4 - Medical Patient Ambient/Exam
Project
Recessed Ceiling or Surface Luminaire
T5, T5HO, T8 Lamps
Type
Date
Product
Code
Approved by
The MD2 series by Certolux is a specification-grade, luminaire which provides a costeffective fluorescent patient room lighting solution. Designed as a combination
Ambient/Exam light for hospitals, nursing homes and other patient care facilities.
Eliminates the need for wall mounted luminaires. The flexibility of the nominal 2’ x 4’
singular modular installation makes this an excellent ceiling-mount fixture.
3461
ProductSpecifications
Housing
Lens
Electrical
Precision formed, code gauge cold rolled
steel. Wiring access plate or knockouts
are provided on back of housing, for
flexible conduit attachment.
The exam compartment is shielded by a
clear linear prismatic acrylic lens. The
ambient compartment shield is a low
profile frosted linear internal prismatic
lens. Optional extruded aluminum door
frame with lens for IP65 rating (see
product ordering key).
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Mounting
Surface Mount - Four .312” dia. holes
provided
Grid Mount - Holes provided for chain
mounting support to building structure,
and comes with integral earthquake clips.
Flange Mount - Yoke mounting bracket
(see product ordering key)
Approvals
Approved to CSA and UL standards.
Dimensions
48.00in
1219.2mm
(4) EMT ACCESS KNOCK-OUTS
5.53in
140.6mm
24.00in
609.6mm
CROSS SECTION
18.00in
457.2mm
.312in
7.9mm
MOUNTING HOLES
(4)
40.00in
1016mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Medical
Facility
ProductSpecifications - Application
MD2-2X4 - Medical Patient Ambient/Exam
Project
Recessed Ceiling or Surface Luminaire
T5, T5HO, T8 Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
Medical
Facility
The MD2 series by Certolux is a specification-grade, luminaire which provides a costeffective fluorescent patient room lighting solution. Designed as a combination
Ambient/Exam light for hospitals, nursing homes and other patient care facilities.
Eliminates the need for wall mounted luminaires. The flexibility of the nominal 2’ x 4’
singular modular installation makes this an excellent ceiling-mount fixture.
3461
Ordering
MD
/
2X4 3461
2
Size
(Width x
Length)
Series Type
2
Model
2x4
Mount
Type
No. of
No.
No.of
of
Lamps Lamps
Lamps
Ambient
Exam
1
2L
2
4L
-
Lamp
Type
T5
T5HO
T8
Lamp
Watts
See Table
below
Voltage
120
277
347
UNV
UN4
Ballast
Type
IF - Inset Door Flange
IG - Inset Door Grid
IS - Inset Door Surface
N - Instant Start
P - Prog. Start
R - Rapid Start
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D11 Extruded Aluminum with Continuous Piano Hinge
D12 Extruded Aluminum with Aircraft Safety Cable
Finish Options
F12 White Antimicrobial
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Type 1 = Exam (only)
Type 2 = Exam and Ambient
Type 3 = Exam, Ambient and Reading
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Mounting Options
M12 Mounting Clips - Earthquake
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
V40 Low Voltage Controller
V43 Field Adjustable LED Chart/Night Light
Reflector Options
VF1 Full (95% Reflectance) Specular
Lamp Watts
Nom. Lamp Watts
Size
T5
T5HO
T8
2x4
28
54
32
+ T5HO lamps only
Approvals Options
X7 Dual CSA/USA
X8 IP65 Rated
Lamp Options
Z1 Lamps Installed (Specify Type)
www.certolux.com
MD3 - Medical Patient Reading/Ambient/Exam
Project
Recessed Ceiling Luminaire
PLL Lamps
Type
Date
Product
Code
Approved by
The MD3 series by Certolux is a specification-grade, luminaire which provides a costeffective fluorescent patient room lighting solution. Designed as a combination
Reading/Ambient/Exam light for hospitals, nursing homes and other patient care
facilities. Eliminates the need for wall mounted luminaires. The flexibility of the nominal
2’ x 4’ singular modular installation makes this an excellent ceiling-mount fixture.
3452
ProductSpecifications
Housing
Optics
Electrical
Precision formed, code gauge cold rolled
steel. Wiring access plate or knockouts
are provided on back of housing, for
flexible conduit attachment.
The reading compartment is protected by
a clear acrylic lens. The ambient
compartment shield is perforated for
direct illumination and contains a
translucent opal white acrylic overlay
diffuser for visual comfort. The exam
compartment is shielded by a semispecular aluminum parabolic louver with
clear acrylic overlay.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Finish
Approved to CSA and UL standards.
Mounting
Holes provided for chain mounting
support to building structure, and comes
with integral earthquake clips.
Approvals
The luminaire is powder painted matte
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency. Anti-microbial finish is also
available.
Dimensions
47.00in
1193.8mm
5.50in
139.7mm
CROSS SECTION
ACCESS
PLATE
23.00in
584.2mm
23.69in
601.7mm
END VIEW
47.69in
1211.3mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Medical
Facility
ProductSpecifications - Application
MD3 - Medical Patient Reading/Ambient/Exam
Project
Recessed Ceiling Luminaire
PLL Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
Medical
Facility
The MD3 series by Certolux is a specification-grade, luminaire which provides a costeffective fluorescent patient room lighting solution. Designed as a combination
Reading/Ambient/Exam light for hospitals, nursing homes and other patient care
facilities. Eliminates the need for wall mounted luminaires. The flexibility of the nominal
2’ x 4’ singular modular installation makes this an excellent ceiling-mount fixture.
3452
Ordering
MD
3
2x4
3452
Size
(Width x
Length)
Model
G
Series Type
1
2
3
2x4
Mount
Type
1
/
-
/
No. of
No. of
No.
No.of
of
Lamps Lamps
Lamps
Lamps
Reading Ambient
Exam
1
3L
1
2
4L
Lamp
Type
Lamp
Watts
PLL
See Table
below
Voltage
120
277
347
UNV
UN4
Ballast
Type
G - Grid (T-Bar)
N - Instant Start
P - Prog. Start
R - Rapid Start
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Finish Options
F12 White Antimicrobial
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Type 3 = Exam, Ambient and Reading
Louver Options
L25 3x3 Inch Semi-specular Clear Parabolic Aluminum
L26 3x3 Inch Semi-specular Clear Parabolic Aluminum
with Clear Acrylic Shield
L27 1/2x1/2x1/2 Silver Parabolic Acrylic with Clear
Acrylic Shield
L28 3x3 Inch White with Clear Acrylic Shield
L30 3x3 Inch Semi-specular Clear Parabolic Aluminum
with P12 Acrylic Shield
Mounting Options
Mounting
Clips - Earthquake
M12
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
V40 Low Voltage Controller
V43 Field Adjustable LED Chart/Night Light
Reflector Options
VF1 Full (95% Reflectance) Specular
Lamp Watts
Nom. Lamp Watts
Size
PLL/Biax
2x4
40, 50, 55
Approvals Options
X6 USA
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
+ PLL 50 and 55 Lamps only
www.certolux.com
MD3 - Medical Patient Reading/Ambient/Exam
Project
Recessed Ceiling Luminaire
PLL Lamps
Type
Date
Product
Code
Approved by
The MD3 series by Certolux is a specification-grade, luminaire which provides a costeffective fluorescent patient room lighting solution. Designed as a combination
Reading/Ambient/Exam light for hospitals, nursing homes and other patient care
facilities. Eliminates the need for wall mounted luminaires. The flexibility of the nominal
2’ x 4’ singular modular installation makes this an excellent ceiling-mount fixture.
3460
ProductSpecifications
Housing
Optics
Electrical
Precision formed, code gauge cold rolled
steel. Wiring access plate or knockouts
are provided on back of housing, for
flexible conduit attachment.
The reading compartment is protected by
a clear acrylic lens. The ambient
compartment shield is perforated for
direct illumination and contains a
translucent opal white acrylic overlay
diffuser for visual comfort. The exam
compartment is shielded by a semispecular aluminum parabolic louver with
clear acrylic overlay.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Finish
Approved to CSA and UL standards.
Mounting
Holes provided for chain mounting
support to building structure, and comes
with integral earthquake clips.
Approvals
The luminaire is powder painted matte
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency. Anti-microbial finish is also
available.
46.69in
1185.8mm
Dimensions
6.75in
171.5mm
CROSS SECTION
(Optional Field Adjustable Night Light LED Shown)
22.69in
576.2mm
ACCESS
PLATE
23.70in
601.9mm
END VIEW
47.70in
1211.5mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Medical
Facility
ProductSpecifications - Application
MD3 - Medical Patient Reading/Ambient/Exam
Project
Recessed Ceiling Luminaire
PLL Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
Medical
Facility
The MD3 series by Certolux is a specification-grade, luminaire which provides a costeffective fluorescent patient room lighting solution. Designed as a combination
Reading/Ambient/Exam light for hospitals, nursing homes and other patient care
facilities. Eliminates the need for wall mounted luminaires. The flexibility of the nominal
2’ x 4’ singular modular installation makes this an excellent ceiling-mount fixture.
3460
Ordering
MD
3
2x4
3460
Size
(Width x
Length)
Model
G
Series Type
1
2
3
2x4
Mount
Type
1
-
/ 1 /
No. of
No. of
No.
No.of
of
Lamps Lamps
Lamps
Lamps
Reading Ambient
Exam
3L
1
1
4L
Lamp
Type
Lamp
Watts
PLL
See Table
below
Voltage
120
277
347
UNV
UN4
Ballast
Type
G - Grid (T-Bar)
N - Instant Start
P - Prog. Start
R - Rapid Start
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Finish Options
F12 White Antimicrobial
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Type 3 = Exam, Ambient and Reading
Louver Options
L25 3x3 Inch Semi-specular Clear Parabolic Aluminum
L26 3x3 Inch Semi-specular Clear Parabolic Aluminum
with Clear Acrylic Shield
L27 1/2x1/2x1/2 Silver Parabolic Acrylic with Clear
Acrylic Shield
L28 3x3 Inch White with Clear Acrylic Shield
L30 3x3 Inch Semi-specular Clear Parabolic Aluminum
with P12 Acrylic Shield
Mounting Options
Mounting
Clips - Earthquake
M12
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
V40 Low Voltage Controller
V43 Field Adjustable LED Chart/Night Light
Reflector Options
VF1 Full (95% Reflectance) Specular
Lamp Watts
Nom. Lamp Watts
Size
PLL/Biax
2x4
40, 50, 55
Approvals Options
X6 USA
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
+ PLL 50 and 55 Lamps only
www.certolux.com
MDGS - Medical Door Germ Shield
Project
Tamper Resistant Germ and Dust Door Accessory
for use with T-Bar(Grid) Ceilings or Flange kits for
use in drywall ceilings
Type
Date
Product
Code
Approved by
3560
ProductSpecifications
Door Frame
Mounting
Finish
Precision formed, aluminum
construction with welded corners.
Stainless steel tamper resistant
TORX® Head with center pin
fasteners secure door to mounting
frame. Fasteners provide with ‘O’
ring gaskets.
The luminaire is powder painted
matte white finish and offers a high
reflectivity coating for improved
lighting performance and efficiency.
Anti-microbial finish is also available.
Lens
Clear .125” thick polycarbonate lens
with gasket.
Dimensions
GRID FRAME
.69in
17.5mm
GASKET
MOUNTING
FRAME
22.93in
582.4mm
25.00in
635mm
CROSS SECTION
49.00in
1244.6mm
Ordering
MDGS 3560
Series
Model
Size
(W x L)
Note: 2X4 Unit shown
1X4
2X2
2X4
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Medical
Facility
ProductSpecifications - Application
The MDGS door accessory by Certolux is a specification-grade,
sealed door assembly kit for use in grid ceilings or in conjunction
with Flange kits for use in drywall ceilings. Available in 1x4, 2x2, 2x4
configurations.
CERTOLUX
S P E C I A LT Y LU M I N A I R E S
Spraybooth
Inside Access Recessed Spraybooth
luminaire
Listed for Class I, II, Div. 2 Group A,B,C,D,
F,G Hazardous Locations
Exterior Rear Access Glass mounted
Recessed Spraybooth luminaire
CERTOLUX
S P E C I A LT Y LU M I N A I R E S
www.certolux.com
Email: info@certolux.com
35 Oak Street, Toronto, Ontario M9N 1A1
Phone: 647-777-3300 Fax: 416-245-4778
SBR - Spraybooth
Project
Specification-Grade Inside Access Recessed Luminaire
T5, T5HO, T8, T8HO Lamps
Industrial Paint Spraybooth
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
Specification-grade industrial paint spraybooth luminaire. For use in most
spraybooth applications that require servicing from inside the booth or in
hazardous locations the require Class I, II Zone 2 Groups A B C D F G
certifications.
3583
Housing
Lens and Lens Retention
Electrical
Die-formed and spot welded, heavygauge steel housing assembly. Gasketing
is provided on the housing flange to seal
against the mounting surface.
The lens assembly is made with a
tempered safety glass sealed to the lens
frame with a non-silicone sealant and is
mechanically secured.
Mounting
Door Frame
The housing is mounted into pre-cut
panel hole and fastened directly to the
spraybooth panel.
One piece 60 degree beveled aluminum
perimeter hinged door frame assembly.
Gasketing ensures the seal between the
door frame assembly and the housing.
Rotary lampholders ensure positive lamp
retention. All electrical components are
CSA or UL listed. ½ Inch NPT hubs are
provided for conduit attachment. Safety
interlock switch is provided. For inside
access the interlock switch is to be wired
in such a way as to disable paint spray
equipment when the frame door is
opened. As a result this unit may be
mounted in spraybooth panels without the
previously required second lens.
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
Finish
Approvals
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Class I, II Zone 2 Groups A B C D F G
(ETL Listed) Certified to UL Standard 844
and CAN/CSA Standard C22.2 No. 137
Note: Dimensional details are for the 1.5x4 size
for additional dimension details contact your
representative.
22 9/16”
2 11/16”
Dimensions
2 1/4”
19 9/16”
7/8ӯK.O.
22 9/16”
Cross Section
48”
51 1/8”
7/8ӯ K.O.
Side View
Top View
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Spraybooth
ProductSpecifications
SBR - Spraybooth
Project
Specification-Grade Inside Access Recessed Luminaire
T5, T5HO, T8, T8HO Lamps
Industrial Paint Spraybooth
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
Specification-grade industrial paint spraybooth luminaire. For use in most
spraybooth applications that require servicing from inside the booth or in
hazardous locations the require Class I, II Zone 2 Groups A B C D F G
certifications.
3583
Ordering
Spraybooth
SB
R
3583
Series
Type
Model
R
-
-
Size
No.
No.ofof
(Width x Lamps
Lamps
Length)
Lamp
Type
T5
T5HO
T8
T8HO
2L
4L
6L
1x3
1.5x3
2x3
1x4
1.5x4
2x4
Lamp
Watts
Voltage
See Table
below
Ballast
Type
120
277
347
UNV
- 120V
- 277V
- 347V
- 120-277V
N - Instant Start
P - Prog. Start
R - Rapid Start
Type R = Inside Access Flanged Door
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B08 Ballast - High Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Reflector Options
VF1 Full (95% Reflectance) Specular
Wiring Options
V09 Flexible Whip (standard 6-ft 3-18 Ga.)
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Approvals Options
X1 Class 1 Zone 2(Div 2)
X3 Class 2 Zone 2(Div 2)
X6 USA Market
X7 Dual CSA/USA
Lamp Watts
Size
Nom. Lamp Watts
T5
T5HO
T8
T8HO
1x3
21
(2 Lamps)
39
25
(2 Lamps) (2 Lamps)
-
1.5x3
21
(4 Lamps)
39
25
(4 Lamps) (4 Lamps)
-
2x3
21
(6 Lamps)
39
25
(6 Lamps) (6 Lamps)
-
1x4
28
(2 Lamps)
54
32
44
(2 Lamps) (2 Lamps) (2 Lamps)
1.5x4
28
(4 Lamps)
54
32
44
(4 Lamps) (4 Lamps) (4 Lamps)
2x4
28
(6 Lamps)
54
32
44
(6 Lamps) (6 Lamps) (6 Lamps)
www.certolux.com
SBRA - Spraybooth
Project
Specification-Grade Inside Access Recessed Luminaire
T5, T5HO, T8, T8HO Lamps
Industrial Paint Spraybooth
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
Specification-grade industrial paint spraybooth luminaire. For use in most
spraybooth applications that require servicing from inside the booth or in
hazardous locations the require Class I, II Zone 2 Groups A B C D F G
certifications.
3581
Housing
Lens and Lens Retention
Electrical
Die-formed and spot welded, heavygauge steel housing assembly. Gasketing
is provided on the housing flange to seal
against the mounting surface.
The lens assembly is made with a
tempered safety glass sealed to the lens
frame with a non-silicone sealant and is
mechanically secured.
Mounting
Door Frame
The housing is mounted into pre-cut
panel hole and fastened directly to the
spraybooth panel.
Extruded aluminum hinged door frame
assembly allows for easy access for
servicing. Gasketing ensures the seal
between the door frame assembly and
the housing.
Rotary lampholders ensure positive lamp
retention. All electrical components are
CSA or UL listed. ½ Inch NPT hubs are
provided for conduit attachment. Safety
interlock switch is provided. For inside
access the interlock switch is to be wired
in such a way as to disable paint spray
equipment when the frame door is
opened. As a result this unit may be
mounted in spraybooth panels without the
previously required second lens.
Finish
Approvals
The luminaire is in a polyester powder
painted white finish.
Approved to CSA and UL standards.
Class I, II Zone 2 Groups A B C D F G
(ETL Listed) Certified to UL Standard 844
and CAN/CSA Standard C22.2 No. 137
Reflector
Painted white reflector is standard,
optional VF1 reflectors are available
which are made of specular anodized
aluminum with a minimum reflectivity of
95% (see product ordering guide).
Dimensions
49.94in
1268.4mm
(2) 1/2" NPT HUBS
14.56in
369.9mm
51.75in
1314.5mm
2.00in
50.8mm
.375in
(12)
9.5mm
MOUNTING HOLES
18.00in
457.2mm
CROSS SECTION
Note: Dimensional details are for the 1.5x4 size
for additional dimension details contact your
representative.
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Spraybooth
ProductSpecifications
SBRA - Spraybooth
Project
Specification-Grade Inside Access Recessed Luminaire
T5, T5HO, T8, T8HO Lamps
Industrial Paint Spraybooth
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
Specification-grade industrial paint spraybooth luminaire. For use in most
spraybooth applications that require servicing from inside the booth or in
hazardous locations the require Class I, II Zone 2 Groups A B C D F G
certifications.
3581
Ordering
Spraybooth
SB
RA 3581
Series
Type
Model
RA
Size
No.
No.ofof
(Width x Lamps
Lamps
Length)
1x3
1.5x3
2x3
1x4
1.5x4
2x4
2L
4L
6L
Lamp
Type
T5
T5HO
T8
T8HO
Lamp
Watts
Voltage
See Table
below
Ballast
Type
120
277
347
UNV
- 120V
- 277V
- 347V
- 120-277V
N - Instant Start
P - Prog. Start
R - Rapid Start
Type RA = Inside Access Extruded Door
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B08 Ballast - High Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Reflector Options
VF1 Full (95% Reflectance) Specular
Wiring Options
V09 Flexible Whip (standard 6-ft 3-18 Ga.)
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Approvals Options
X1 Class 1 Zone 2(Div 2)
X3 Class 2 Zone 2(Div 2)
X6 USA Market
X7 Dual CSA/USA
Lamp Watts
Size
Nom. Lamp Watts
T5
T5HO
T8
T8HO
1x3
21
(2 Lamps)
39
(2 Lamps)
25
(2 Lamps)
-
1.5x3
21
(4 Lamps)
39
(4 Lamps)
25
(4 Lamps)
-
2x3
21
(6 Lamps)
39
(6 Lamps)
25
(6 Lamps)
-
1x4
28
(2 Lamps)
54
(2 Lamps)
32
(2 Lamps)
44
(2 Lamps)
1.5x4
2x4
28
54
32
(4,6 Lamps) (4,6 Lamps) (4,6 Lamps)
28
(6 Lamps)
54
(6 Lamps)
32
(6 Lamps)
44
(4,6 Lamps)
44
(6 Lamps)
www.certolux.com
CERTOLUX
S P E C I A LT Y LU M I N A I R E S
Vandal Resistant
Maximum Security Wall Luminaire
Ideal for Cells & Washrooms
Wall mount Bullnose style
Vandal Resistant Surface Luminaires in a
variety of materials and construction types to
suit various applications.
CERTOLUX
S P E C I A LT Y LU M I N A I R E S
www.certolux.com
Email: info@certolux.com
35 Oak Street, Toronto, Ontario M9N 1A1
Phone: 647-777-3300 Fax: 416-245-4778
VRC - Confinement
Project
Corner Mount Luminaire
T5, T5HO, T8 Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRC series by Certolux is a specification-grade luminaire for maximum security
and vandal resistant applications. The hinged door design has concealed hinges,
tamper resistant fasteners, contraband trapping backplate, and security lenses. This
maximizes impact resistance, prevents contraband concealment and unauthorized
fixture tampering/penetration.. The luminaire can be corner mounted.
3496
ProductSpecifications
Housing
Hinge
Electrical
Precision die formed 12, 14, or 16 gauge
cold rolled steel housing with 12 gauge
continuously welded end plates.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to backplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Die formed 12, 14 or 16 ga. CRS with
embossed mounting holes and
contraband trap.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Lens and Lens Retention
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable V style brackets with through
studs on housing faceplate.
Approvals
Approved to CSA and UL standards.
Finish
Vandal
Resistant
Backplate
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Dimensions
7.63in
193.7mm
48.22in
1224.8mm
7.63in
193.7mm
.375in
9.5mm
MOUNTING HOLES
(12)
WIRING ACCESS
CROSS SECTION
TOP/REAR VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRC - Confinement
Project
Corner Mount Luminaire
T5, T5HO, T8 Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRC series by Certolux is a specification-grade luminaire for maximum security
and vandal resistant applications. The hinged door design has concealed hinges,
tamper resistant fasteners, contraband trapping backplate, and security lenses. This
maximizes impact resistance, prevents contraband concealment and unauthorized
fixture tampering/penetration.. The luminaire can be corner mounted.
3496
Ordering
VR C
3496
Size
(L)
Series
-
/
No.
No. of
of
Lamps
Lamps
Model
Vandal
Resistant
24
48
1L
2L
3L
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
/
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V *
External
No. of
Lens
Lamps
Ballast
Type
Mount
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
C - Corner
Door/Housing
Gauge
B
C
D
F
G
J
K
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
** Not Available as Housing Material
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T6
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
Size
T5
T5HO
T8
24
14
24
17
48
28
54
32
www.certolux.com
VRC - Confinement
Project
Corner Mount Luminaire
Clamshell Hinged Door
T5, T5HO, T8 Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRC series by Certolux is a specification-grade luminaire for maximum security
and vandal resistant applications. The clamshell door design has concealed hinges,
tamper resistant fasteners, contraband trapping backplate, and security lenses. This
maximizes impact resistance, prevents contraband concealment and unauthorized
fixture tampering/penetration.. The luminaire can be corner mounted.
3524
ProductSpecifications
Housing
Hinge
Electrical
Precision die formed 12, 14, or 16 gauge
cold rolled steel housing with 12 gauge
continuously welded end plates.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to backplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Die formed 12, 14 or 16 ga. CRS with
embossed mounting holes and
contraband trap.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Lens and Lens Retention
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable V style brackets with through
studs on housing faceplate.
Approvals
Approved to CSA and UL standards.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Vandal
Resistant
Backplate
Dimensions
8.95in
227.3mm
49.90in
1267.6mm
8.95in
227.3mm
(6) MOUNTING HOLES IN EMBOSSES
WIRING HOLE
CROSS SECTION
6.36in
161.5mm
20.00in
508mm
20.00in
508mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRC - Confinement
Project
Corner Mount Luminaire
Clamshell Hinged Door
T5, T5HO, T8 Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRC series by Certolux is a specification-grade luminaire for maximum security
and vandal resistant applications. The clamshell door design has concealed hinges,
tamper resistant fasteners, contraband trapping backplate, and security lenses. This
maximizes impact resistance, prevents contraband concealment and unauthorized
fixture tampering/penetration.. The luminaire can be corner mounted.
3524
Ordering
VR C
Size
(L)
Series
- T5HO 54 N UNV -
/
3524
No.
No. of
of
Lamps
Lamps
Model
Vandal
Resistant
24
48
1L
2L
3L
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
/
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
External
No. of
Lens
Lamps
Ballast
Type
Mount
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
C - Corner
Door/Housing
Gauge
B
C
D
F
G
J
K
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
** Not Available as Housing Material
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
Size
T5
T5HO
T8
24
14
24
17
48
28
54
32
+ T5HO Lamps only
www.certolux.com
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
VRF - Confinement
Project
Recessed Drywall Ceiling Luminaire
with Door Frame
T5, T5HO, T8, or PLL Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRF series by Certolux is a specification-grade luminaire for medium security and
vandal resistant applications. The luminaire design has concealed hinges, tamper
resistant fasteners and security lenses. This maximizes impact resistance and
unauthorized fixture tampering/penetration. The luminaire can be recessed drywall
ceiling mounted.
3553
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing with
specified material (see product ordering
key) with continuously welded end plates.
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable Z style brackets with through
studs on housing faceplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to housing.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Approvals
Approved to CSA and UL standards.
Vandal
Resistant
Hinge
Dimensions
48.00in
1219.2mm
4.96in
126.1mm
24.00in
609.6mm
49.08in
1246.7mm
.875in
22.2mm
EMT ACCESS
4.59in
116.5mm
.313in
(4)
7.9mm
MOUNTING HOLES
25.08in
637.1mm
CROSS SECTION
25.08in
637.1mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRF - Confinement
Project
Recessed Drywall Ceiling Luminaire
with Door Frame
T5, T5HO, T8, or PLL Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRF series by Certolux is a specification-grade luminaire for medium security and
vandal resistant applications. The luminaire design has concealed hinges, tamper
resistant fasteners and security lenses. This maximizes impact resistance and
unauthorized fixture tampering/penetration. The luminaire can be recessed drywall
ceiling mounted.
3553
Ordering
VR F
Size
(W x L)
Series
Mount
Type
-
/
3553
No.
No. of
of
Lamps
Lamps
Model
1x4
2x2
2x4
Door/Housing
Gauge
F - Flange (Drywall)
Vandal
Resistant
A
B
C
E
F
G
H
J
K
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
1L
2L
3L
4L
- 18 Ga. CRS (Painted)
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 18 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
** Not Available as Housing Material
- 120V
- 277V
- 347V
- 120-277V
- 347-480V *
/
Internal
No. of
Lens
Lamps
External
No. of
Lens
Lamps
Ballast
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M31 Mounting Yoke
M42 Mounting Swing Out Arms
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
T8
T5HO
Size
T5
1x4
28
(1,2 or
3 lamps)
54
(2 lamps
max)
32
(1,2 or
3 lamps)
-
2x2
14
24
17
40, 50, 55
2x4
28
54
32
-
PLL
* T5HO Lamps only
www.certolux.com
VRG - Confinement
Project
Recessed Drywall Ceiling Luminaire
with Door Frame
T5, T5HO, T8, or PLL Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRG series by Certolux is a specification-grade luminaire for medium security
and vandal resistant applications. The luminaire design has concealed hinges,
tamper resistant fasteners and security lenses. This maximizes impact resistance
and unauthorized fixture tampering/penetration. The luminaire can be recessed T-Bar
ceiling mounted.
3552
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing with
specified material (see product ordering
key) with continuously welded end plates.
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable Z style brackets with through
studs on housing faceplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to housing.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Approvals
Approved to CSA and UL standards.
Vandal
Resistant
Hinge
Dimensions
48.00in
1219.2mm
4.96in
126mm
22.95in
582.9mm
.875in
22.2mm
EMT ACCESS
4.59in
116.5mm
47.75in
1212.9mm
23.75in
603.3mm
CROSS SECTION
23.75in
603.3mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRG - Confinement
Project
Recessed Drywall Ceiling Luminaire
with Door Frame
T5, T5HO, T8, or PLL Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRG series by Certolux is a specification-grade luminaire for medium security
and vandal resistant applications. The luminaire design has concealed hinges,
tamper resistant fasteners and security lenses. This maximizes impact resistance
and unauthorized fixture tampering/penetration. The luminaire can be recessed T-Bar
ceiling mounted.
3552
Ordering
VR G
Size
(W x L)
Series
Mount
Type
-
/
3552
No.
No. of
of
Lamps
Lamps
Model
1x4
2x2
2x4
Door/Housing
Gauge
G - Grid (T-Bar)
Vandal
Resistant
A
B
C
E
F
G
H
J
K
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
1L
2L
3L
4L
- 18 Ga. CRS (Painted)
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 18 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
** Not Available as Housing Material
- 120V
- 277V
- 347V
- 120-277V
- 347-480V *
Nom. Lamp Watts
T8
T5HO
1x4
28
(1,2 or
3 lamps)
54
(2 lamps
max)
32
(1,2 or
3 lamps)
-
2x2
14
24
17
40, 50, 55
2x4
28
54
32
-
External
No. of
Lens
Lamps
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
Lamp Watts
T5
Internal
No. of
Lens
Lamps
Ballast
Type
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
/
PLL
* T5HO Lamps only
www.certolux.com
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
VRIF1X4 - Confinement
Project
Recessed Flanged Ceiling Luminaire
with Inset Door Frame
T5, T5HO, T8 Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIF1X4 series by Certolux is a specification-grade recessed flanged luminaire
for medium security and vandal resistant applications. The luminaire design has
concealed hinges, tamper resistant fasteners and security lenses. This maximizes
impact resistance and unauthorized fixture tampering/penetration.
3497
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing with
specified material (see product ordering
key) with continuously welded end plates.
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable Z style brackets with through
studs on housing faceplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to housing.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Approvals
Approved to CSA and UL standards.
Vandal
Resistant
Hinge
Dimensions
48.00in
1219.2mm
12.00in
304.8mm
3.00in
76.2mm
49.50in
1257.3mm
10.10in
256.5mm
WIRING ACCESS
13.50in
342.9mm
CROSS SECTION
(6) MOUNTING HOLES
13.50in
342.9mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRIF1X4 - Confinement
Project
Recessed Flanged Ceiling Luminaire
with Inset Door Frame
T5, T5HO, T8 Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIF1X4 series by Certolux is a specification-grade recessed flanged luminaire
for medium security and vandal resistant applications. The luminaire design has
concealed hinges, tamper resistant fasteners and security lenses. This maximizes
impact resistance and unauthorized fixture tampering/penetration.
3497
Ordering
VR IF
Size
(W x L)
Series
-
/
1X4 3497
No.
No. of
of
Lamps
Lamps
Model
Lamp
Type
Voltage
120
277
347
UNV
UN4
1x4
Vandal
Resistant
1L
2L
3L
T5
T5HO
T8
/
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
External
No. of
Lens
Lamps
Ballast
Type
Mount
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
IF - Inset Door Flange (Drywall)
Door/Housing
Gauge
A
B
C
D
E
F
G
H
J
K
L
M
N
P
- 18 Ga. CRS (Painted)
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 18 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 16 Ga. SS #316 (Painted)
- 14 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)
Lamp
Watts
See Table
below
Internal/External Lens
P00 - None
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
** Not Available as Housing Material
Lamp Watts
Nom. Lamp Watts
T8
T5HO
T5
1x4
28
(1,2 or
3 lamps)
54
(1 or 2
lamps)
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M31 Mounting Yoke
M42 Mounting Swing Out Arms
Fusing and Breaker Options
T5
T6
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
Options
32
(1,2 or
3 lamps)
+ T5HO Lamps only
www.certolux.com
VRIF2X2 - Confinement
Project
Recessed Flanged Ceiling Luminaire
with Inset Door Frame
T5, T5HO, T8 and PLL Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIF2X2 series by Certolux is a specification-grade recessed flanged luminaire
for medium security and vandal resistant applications. The luminaire design has
concealed hinges, tamper resistant fasteners and security lenses. This maximizes
impact resistance and unauthorized fixture tampering/penetration.
3497
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing with
specified material (see product ordering
key) with continuously welded end plates.
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable Z style brackets with through
studs on housing faceplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to housing.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Approvals
Approved to CSA and UL standards.
Vandal
Resistant
Hinge
24.00in
609.6mm
Dimensions
24.00in
609.6mm
25.50in
647.7mm
WIRING ACCESS
(4) MOUNTING HOLES
3.00in
76.2mm
22.10in
561.3mm
25.50in
647.7mm
CROSS SECTION
25.50in
647.7mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRIF2X2 - Confinement
Project
Recessed Flanged Ceiling Luminaire
with Inset Door Frame
T5, T5HO, T8 and PLL Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIF2X2 series by Certolux is a specification-grade recessed flanged luminaire
for medium security and vandal resistant applications. The luminaire design has
concealed hinges, tamper resistant fasteners and security lenses. This maximizes
impact resistance and unauthorized fixture tampering/penetration.
3497
Ordering
VR IF
Size
(W x L)
Series
-
/
2X2 3497
No.
No. of
of
Lamps
Lamps
Model
Lamp
Type
Voltage
120
277
347
UNV
UN4
2x2
Vandal
Resistant
2L
3L
4L
T5
T5HO
T8
PLL
/
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
External
No. of
Lens
Lamps
Ballast
Type
Mount
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
IF - Inset Door Flange (Drywall)
Lamp
Watts
Door/Housing
Gauge
A
B
C
D
E
F
G
H
J
K
L
M
N
P
- 18 Ga. CRS (Painted)
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 18 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 16 Ga. SS #316 (Painted)
- 14 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)
See Table
below
Internal/External Lens
P00 - None
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
** Not Available as Housing Material
Lamp Watts
T5
2x2
14
Nom. Lamp Watts
T8
T5HO
24
17
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M31 Mounting Yoke
M42 Mounting Swing Out Arms
Fusing and Breaker Options
T5
T6
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
Options
PLL
40, 50, 55
+ T5HO Lamps only
www.certolux.com
VRIF2X4 - Confinement
Project
Recessed Flanged Ceiling Luminaire
with Inset Door Frame
T5, T5HO, T8 Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIF2X4 series by Certolux is a specification-grade recessed flanged luminaire
for medium security and vandal resistant applications. The luminaire design has
concealed hinges, tamper resistant fasteners and security lenses. This maximizes
impact resistance and unauthorized fixture tampering/penetration.
3497
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed housing with
specified material (see product ordering
key) with continuously welded end plates.
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable Z style brackets with through
studs on housing faceplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to housing.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Approvals
Approved to CSA and UL standards.
Vandal
Resistant
Hinge
Dimensions
48.00in
1219.2mm
24.00in
609.6mm
49.50in
1257.3mm
3.00in
76.2mm
WIRING ACCESS
(6) MOUNTING HOLES
22.10in
561.3mm
25.50in
647.7mm
CROSS SECTION
25.50in
647.7mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRIF2X4 - Confinement
Project
Recessed Flanged Ceiling Luminaire
with Inset Door Frame
T5, T5HO, T8 Lamps
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIF2X4 series by Certolux is a specification-grade recessed flanged luminaire
for medium security and vandal resistant applications. The luminaire design has
concealed hinges, tamper resistant fasteners and security lenses. This maximizes
impact resistance and unauthorized fixture tampering/penetration.
3497
Ordering
VR IF
Size
(W x L)
Series
-
/
2X4 3497
No.
No. of
of
Lamps
Lamps
Model
Lamp
Type
Voltage
120
277
347
UNV
UN4
2x4
Vandal
Resistant
2L
3L
4L
T5
T5HO
T8
/
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
External
No. of
Lens
Lamps
Ballast
Type
Mount
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
IF - Inset Door Flange (Drywall)
Door/Housing
Gauge
A
B
C
D
E
F
G
H
J
K
L
M
N
P
- 18 Ga. CRS (Painted)
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 18 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 16 Ga. SS #316 (Painted)
- 14 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)
Lamp
Watts
See Table
below
Internal/External Lens
P00 - None
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
** Not Available as Housing Material
Lamp Watts
Nom. Lamp Watts
T8
T5HO
T5
2x4
28
(2,3, or 4
lamps)
54
(2,3, or 4
lamps)
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Mounting Options
M31 Mounting Yoke
M42 Mounting Swing Out Arms
Fusing and Breaker Options
T5
T6
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
Options
32
(2,3, or 4
lamps)
+ T5HO Lamps only
www.certolux.com
VRIS1X4 - Confinement
Project
Surface Mount Luminaire
T5, T5HO Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIS1X4 series by Certolux is a specification-grade luminaire for maximum
security and vandal resistant applications. The shallow design has concealed hinges,
tamper resistant fasteners and security lenses. This maximizes impact resistance
and unauthorized fixture tampering/penetration. The luminaire can be ceiling surface
mounted and is available in 1x4 configurations.
3490
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed 14, 16, or 18 gauge
premium grade material as specified (see
product ordering key) with continuously
welded corners.
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .500”. The lens is secured with
adjustable Z style brackets with through
studs on housing faceplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Hinge
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Approvals
Approved to CSA and UL standards.
Vandal
Resistant
Full length concealed piano style hinge
with .500” knuckle and .125” pin(Pin is
secured to knuckle) welded to door frame
and fastened to backplate.
Dimensions
49.11in
1247.4mm
2.63in
66.7mm
10.00in
254mm
.31in
(6)
7.9mm
MOUNTING HOLES
(2) EMT ACCESS
WIRING KNOCK-OUT
CROSS SECTION
4.00in
101.6mm
19.00in
482.6mm
TYPICAL
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRIS1X4 - Confinement
Project
Surface Mount Luminaire
T5, T5HO Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIS1X4 series by Certolux is a specification-grade luminaire for maximum
security and vandal resistant applications. The shallow design has concealed hinges,
tamper resistant fasteners and security lenses. This maximizes impact resistance
and unauthorized fixture tampering/penetration. The luminaire can be ceiling surface
mounted and is available in 1x4 configurations.
3490
Ordering
VR IS
Size
(W x L)
Series
-
/
1X4 3490
No.
No. of
of
Lamps
Lamps
Model
Lamp
Type
Voltage
120
277
347
UNV
UN4
1x4
Vandal
Resistant
1L
2L
3L
T5
T5HO
/
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
External
No. of
Lens
Lamps
Ballast
Type
Mount
Type
P - Prog. Start
A
B
C
D
E
F
G
H
J
K
L
M
N
P
- 18 Ga. CRS (Painted)
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 18 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 16 Ga. SS #316 (Painted)
- 14 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
** Not Available as Housing Material
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
T5HO
Size
T5
1x4
28
(1,2 or
3 lamps)
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
IS - Inset Door Surface
Door/Housing
Gauge
Options
54
(2 lamps
max)
+ T5HO Lamps only
www.certolux.com
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T5
T6
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
VRIS2X2 - Confinement
Project
Surface Mount Luminaire
T5, T5HO Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIS2X2 series by Certolux is a specification-grade luminaire for maximum
security and vandal resistant applications. The shallow design has concealed hinges,
tamper resistant fasteners and security lenses. This maximizes impact resistance
and unauthorized fixture tampering/penetration. The luminaire can be ceiling surface
mounted and is available in 2x2 configurations.
3490
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed 14, 16, or 18 gauge
premium grade material as specified (see
product ordering key) with continuously
welded corners.
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .500”. The lens is secured with
adjustable Z style brackets with through
studs on housing faceplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Hinge
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Approvals
Approved to CSA and UL standards.
Vandal
Resistant
Full length concealed piano style hinge
with .500” knuckle and .125” pin(Pin is
secured to knuckle) welded to door frame
and fastened to backplate.
Dimensions
25.11in
637.8mm
2.63in
66.7mm
22.00in
558.8mm
CROSS SECTION
.31in
7.9mm
MOUNTING HOLES
(4)
(2) EMT ACCESS
WIRING KNOCK-OUT
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRIS2X2 - Confinement
Project
Surface Mount Luminaire
T5, T5HO Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIS2X2 series by Certolux is a specification-grade luminaire for maximum
security and vandal resistant applications. The shallow design has concealed hinges,
tamper resistant fasteners and security lenses. This maximizes impact resistance
and unauthorized fixture tampering/penetration. The luminaire can be ceiling surface
mounted and is available in 2x2 configurations.
3490
Ordering
VR IS
Size
(W x L)
Series
-
/
2X2 3490
No.
No. of
of
Lamps
Lamps
Model
Lamp
Type
Voltage
120
277
347
UNV
UN4
2x2
Vandal
Resistant
2L
3L
4L
6L
T5
T5HO
/
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
External
No. of
Lens
Lamps
Ballast
Type
Mount
Type
P - Prog. Start
A
B
C
D
E
F
G
H
J
K
L
M
N
P
- 18 Ga. CRS (Painted)
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 18 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 16 Ga. SS #316 (Painted)
- 14 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
** Not Available as Housing Material
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
T5HO
Size
T5
2x2
14
(2,3,4 or
6 lamps)
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
IS - Inset Door Surface
Door/Housing
Gauge
Options
24
(4 lamps
max)
+ T5HO Lamps only
www.certolux.com
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T5
T6
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
VRIS2X4 - Confinement
Project
Surface Mount Luminaire
T5, T5HO Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIS2X4 series by Certolux is a specification-grade luminaire for maximum
security and vandal resistant applications. The shallow design has concealed hinges,
tamper resistant fasteners and security lenses. This maximizes impact resistance
and unauthorized fixture tampering/penetration. The luminaire can be ceiling surface
mounted and is available in 2x4 configurations.
3490
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Precision die formed 14, 16, or 18 gauge
premium grade material as specified (see
product ordering key) with continuously
welded corners.
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .500”. The lens is secured with
adjustable Z style brackets with through
studs on housing faceplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Hinge
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Approvals
Approved to CSA and UL standards.
Vandal
Resistant
Full length concealed piano style hinge
with .500” knuckle and .125” pin(Pin is
secured to knuckle) welded to door frame
and fastened to backplate.
Dimensions
49.11in
1247.4mm
2.63in
66.7mm
.31in
7.9mm
MOUNTING HOLES
(6)
22.00in
558.8mm
(2) EMT ACCESS
WIRING KNOCK-OUT
CROSS SECTION
16.00in
406.4mm
19.00in
482.6mm
TYPICAL
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRIS2X4 - Confinement
Project
Surface Mount Luminaire
T5, T5HO Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRIS2X4 series by Certolux is a specification-grade luminaire for maximum
security and vandal resistant applications. The shallow design has concealed hinges,
tamper resistant fasteners and security lenses. This maximizes impact resistance
and unauthorized fixture tampering/penetration. The luminaire can be ceiling surface
mounted and is available in 2x4 configurations.
3490
Ordering
VR IS
Size
(W x L)
Series
-
/
2X4 3490
No.
No. of
of
Lamps
Lamps
Model
Lamp
Type
Voltage
120
277
347
UNV
UN4
2x4
Vandal
Resistant
2L
3L
4L
6L
T5
T5HO
/
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
External
No. of
Lens
Lamps
Ballast
Type
Mount
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
IS - Inset Door Surface
Door/Housing
Gauge
A
B
C
D
E
F
G
H
J
K
L
M
N
P
- 18 Ga. CRS (Painted)
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 18 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 18 Ga. SS #304 (#4 Brushed)**
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
- 18 Ga. SS #316 (Painted)
- 16 Ga. SS #316 (Painted)
- 14 Ga. SS #316 (Painted)
- 20 Ga. CRS (Painted)
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
** Not Available as Housing Material
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Size
2x4
T5
Nom. Lamp Watts
T5HO
28
54
(2,3,4 or (2,3,4 or 6
6 lamps) lamps max)
+ T5HO Lamps only
www.certolux.com
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T5
T6
Fuseholder, In-line Double Pole
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
VRS - Confinement
Project
Ceiling Mount Luminaire
T5, T5HO, T8, PLL Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRS series by Certolux is a specification-grade luminaire for maximum security
and vandal resistant applications. The clamshell design has concealed hinges,
tamper resistant fasteners, contraband trapping backplate, and security lenses. This
maximizes impact resistance, prevents contraband concealment and unauthorized
fixture tampering/penetration.. The luminaire can be ceiling mounted.
3526
ProductSpecifications
Housing
Hinge
Electrical
Precision die formed 12, 14, or 16 gauge
cold rolled steel housing with 12 gauge
continuously welded end plates.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to backplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Die formed 12, 14 or 16 ga. CRS with
embossed mounting holes and
contraband trap.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Lens and Lens Retention
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .875”. The lens is secured with
adjustable V style brackets with through
studs on housing faceplate.
Approvals
Approved to CSA and UL standards.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Vandal
Resistant
Backplate
Dimensions
12.00in
304.8mm
51.25in
1301.8mm
5.00in
127mm
WIRING HOLE
(6) MOUNTING
HOLES IN EMBOSS
CROSS SECTION
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRS - Confinement
Project
Ceiling Mount Luminaire
T5, T5HO, T8, PLL Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRS series by Certolux is a specification-grade luminaire for maximum security
and vandal resistant applications. The clamshell design has concealed hinges,
tamper resistant fasteners, contraband trapping backplate, and security lenses. This
maximizes impact resistance, prevents contraband concealment and unauthorized
fixture tampering/penetration.. The luminaire can be ceiling mounted.
3526
Ordering
VR S
Size
(W x L)
Series
-
/
3526
No.
No. of
of
Lamps
Lamps
Model
1x2
1x4
2L
3L
Mount
Type
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
PLL
Vandal
Resistant
Door/Housing
Gauge
S - Surface
B
C
D
F
G
J
K
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
** Not Available as Housing Material
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
Nom. Lamp Watts
1x2
1x4
T8
PLL
14
24
(2,3
(2,3
lamps) lamps)
17
(2,3
lamps)
40
(2,3
lamps)
28
54
(2,3
(2,3
lamps) lamps)
32
(2,3
lamps)
T5HO
External
No. of
Lens
Lamps
Ballast
Type
Lamp Watts
T5
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
/
+ T5HO Lamps only
www.certolux.com
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
Project
VRS1X4 - Confinement
Type
Surface Mount Luminaire
T5, T5HO, T8, PLL Lamps
(Cells, Corridors, Dayrooms)
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRS1X4 series by Certolux is a specification-grade luminaire for maximum
security and vandal resistant applications. The clamshell design has concealed
hinges, tamper resistant fasteners, contraband trapping backplate, and security
lenses. This maximizes impact resistance, prevents contraband concealment and
unauthorized fixture tampering/penetration.. The luminaire can be wall or ceiling
mounted.
3492
ProductSpecifications
Housing
Hinge
Electrical
Precision die formed 12, 14, or 16 gauge
cold rolled steel housing with 12 gauge
continuously welded end plates.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to backplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Die formed 12, 14 or 16 ga. CRS with
embossed mounting holes and
contraband trap.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Lens and Lens Retention
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable V style brackets with through
studs on housing faceplate.
Approvals
Approved to CSA and UL standards.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Vandal
Resistant
Backplate
Dimensions
13.00in
330.2mm
49.65in
1261.2mm
(8) MOUNTING
HOLES IN EMBOSS
WIRING HOLE
5.25in
133.4mm
9.00in
228.6mm
CROSS SECTION
15.00in
381mm
TYPICAL
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Project
VRS1X4 - Confinement
Type
Surface Mount Luminaire
T5, T5HO, T8, PLL Lamps
(Cells, Corridors, Dayrooms)
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRS1X4 series by Certolux is a specification-grade luminaire for maximum
security and vandal resistant applications. The clamshell design has concealed
hinges, tamper resistant fasteners, contraband trapping backplate, and security
lenses. This maximizes impact resistance, prevents contraband concealment and
unauthorized fixture tampering/penetration.. The luminaire can be wall or ceiling
mounted.
3492
Ordering
VR S
Size
(W x L)
Series
-
/
1X4 3492
No.
No. of
of
Lamps
Lamps
Model
1x4
2L
3L
Mount
Type
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
Vandal
Resistant
Door/Housing
Gauge
S - Surface
B
C
D
F
G
J
K
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
** Not Available as Housing Material
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
Nom. Lamp Watts
1x4
T5HO
28
54
(2,3
(2,3
lamps) lamps)
External
No. of
Lens
Lamps
Ballast
Type
Lamp Watts
T5
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
/
T8
32
(2,3
lamps)
+ T5HO Lamps only
www.certolux.com
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
VRS1.5X2 - Confinement
Project
Surface Mount Luminaire
T5, T5HO, T8, PLL Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRS series by Certolux is a specification-grade luminaire for maximum security
and vandal resistant applications. The clamshell design has concealed hinges,
tamper resistant fasteners, contraband trapping backplate, and security lenses. This
maximizes impact resistance, prevents contraband concealment and unauthorized
fixture tampering/penetration.. The luminaire can be wall or ceiling mounted.
3489
ProductSpecifications
Housing
Hinge
Electrical
Precision die formed 12, 14, or 16 gauge
cold rolled steel housing with 12 gauge
continuously welded end plates.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to backplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Die formed 12, 14 or 16 ga. CRS with
embossed mounting holes and
contraband trap.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Lens and Lens Retention
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable V style brackets with through
studs on housing faceplate.
Approvals
Approved to CSA and UL standards.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Vandal
Resistant
Backplate
Dimensions
20.00in
508mm
25.47in
646.9mm
21.00in
533.4mm
4.88in
123.8mm
CROSS SECTION
15.00in
381mm
(4) MOUNTING
HOLES IN EMBOSS
WIRING HOLE
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRS1.5X2 - Confinement
Project
Surface Mount Luminaire
T5, T5HO, T8, PLL Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRS series by Certolux is a specification-grade luminaire for maximum security
and vandal resistant applications. The clamshell design has concealed hinges,
tamper resistant fasteners, contraband trapping backplate, and security lenses. This
maximizes impact resistance, prevents contraband concealment and unauthorized
fixture tampering/penetration.. The luminaire can be wall or ceiling mounted.
3489
Ordering
VR S 1.5X2 3489
Size
(W x L)
Series
-
/
No.
No. of
of
Lamps
Lamps
Model
1.5x2
2L
3L
Mount
Type
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
PLL
Vandal
Resistant
Door/Housing
Gauge
S - Surface
B
C
D
F
G
J
K
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
** Not Available as Housing Material
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
Nom. Lamp Watts
1.5x2
T5HO
14
24
(2,3
(2,3
lamps) lamps)
T8
PLL
17
(2,3
lamps)
40
(2,3
lamps)
External
No. of
Lens
Lamps
Ballast
Type
Lamp Watts
T5
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
/
+ T5HO Lamps only
www.certolux.com
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
VRS1.5X4 - Confinement
Project
Surface Mount Luminaire
T5, T5HO, T8, PLL Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRS1.5X4 series by Certolux is a specification-grade luminaire for maximum
security and vandal resistant applications. The clamshell design has concealed
hinges, tamper resistant fasteners, contraband trapping backplate, and security
lenses. This maximizes impact resistance, prevents contraband concealment and
unauthorized fixture tampering/penetration. The luminaire can be wall or ceiling
mounted.
3489
ProductSpecifications
Housing
Hinge
Electrical
Precision die formed 12, 14, or 16 gauge
cold rolled steel housing with 12 gauge
continuously welded end plates.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to backplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Die formed 12, 14 or 16 ga. CRS with
embossed mounting holes and
contraband trap.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Lens and Lens Retention
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable V style brackets with through
studs on housing faceplate.
Approvals
Approved to CSA and UL standards.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Vandal
Resistant
Backplate
Dimensions
49.50in
1257.2mm
20.00in
508mm
(8) MOUNTING
HOLES IN EMBOSS
4.88in
123.8mm
15.00in TYPICAL
381mm
WIRING HOLE
CROSS SECTION
15.00in
381mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRS1.5X4 - Confinement
Project
Surface Mount Luminaire
T5, T5HO, T8, PLL Lamps
(Cells, Corridors, Dayrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRS1.5X4 series by Certolux is a specification-grade luminaire for maximum
security and vandal resistant applications. The clamshell design has concealed
hinges, tamper resistant fasteners, contraband trapping backplate, and security
lenses. This maximizes impact resistance, prevents contraband concealment and
unauthorized fixture tampering/penetration.. The luminaire can be wall or ceiling
mounted.
3489
Ordering
VR S 1.5X4 3489
Size
(W x L)
Series
-
/
No.
No. of
of
Lamps
Lamps
Model
1.5x4
2L
3L
Mount
Type
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
PLL
Vandal
Resistant
Door/Housing
Gauge
S - Surface
B
C
D
F
G
J
K
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
** Not Available as Housing Material
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp
Watts
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
Nom. Lamp Watts
1.5x4
T5HO
28
54
(2,3
(2,3
lamps) lamps)
External
No. of
Lens
Lamps
Ballast
Type
Lamp Watts
T5
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Size
/
T8
32
(2,3
lamps)
+ T5HO Lamps only
www.certolux.com
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D13 Door Frame Safety Secured
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
VRSE - Architectural Vandal Resistant
Project
Surface Mount Luminaire
T5, T5HO, T8 Lamps
(Public areas - Transit, Hallways,
Stairwells, Community Centres )
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRSE series by Certolux is a specification-grade architectural linear fluorescent
luminaire for high abuse / vandal resistant applications. The housing is an extruded
aluminum construction with die-cast end plates. The polycarbonate lens and tamper
resistant fasteners. T allow this unit to be used in high abuse areas. The luminaire can
be ceiling or wall mounted.
3556
ProductSpecifications
Housing
Lens and Lens Retention
Electrical
Heavy gauge marine grade extruded
aluminum with die-cast end caps.
Includes knockouts for surface conduit
and tandem mounting.
The polycarbonate lens is UV stabilized
and is available in both opal or clear(see
product ordering key for options). The
lens is secured to the housing with four(4)
TORX® Head with center pin stainless
steel fasteners.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Reflector
Precision die formed 20 ga. CRS full
reflector that also acts as a wire cover
with 92% reflectivity.
Finish
The luminaire is in a powder painted
white finish post assembly.
Approvals
Vandal
Resistant
Approved to CSA and UL standards for
use in Damp locations.
Dimensions
9.26in
235.3mm
49.13in
1247.8mm
3.97in
100.8mm
.875in
(3)
22.2mm
EMT KNOCK-OUTS
(6)
.312in
7.9mm
MOUNTIN HOLES
CROSS SECTION
3.65in
92.7mm
24.19in
614.4mm
21.69in
550.9mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRSE - Architectural Vandal Resistant
Project
Surface Mount Luminaire
T5, T5HO, T8 Lamps
(Public areas - Transit, Hallways,
Stairwells, Community Centres )
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRSE series by Certolux is a specification-grade architectural linear fluorescent
luminaire for high abuse / vandal resistant applications. The housing is an extruded
aluminum construction with die-cast end plates. The polycarbonate lens and tamper
resistant fasteners. T allow this unit to be used in high abuse areas. The luminaire can
be ceiling or wall mounted.
3556
Ordering
VR SE
Size
(W x L)
Series
-
3556
No.
No. of
of
Lamps
Lamps
Model
Vandal
Resistant
24
36
48
72 *
96 **
1L
2L
3L
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
Run
CFG
(Blank)
BR
MR
ER
Mount
Type
= Standalone
= Beginning of Run
= Middle of Run
= End of Run
SE - Surface Extruded
Ballast
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
Lamp
Watts
See Table
below
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Lens Options(VRSE Only)
P40 Ribbed Linear Clear Prismatic Acrylic Lens
P41 Ribbed Linear White Prismatic Acrylic Lens
P54 Ribbed Linear Clear Prismatic Polycarbonate Lens
P55 Ribbed Linear White Prismatic Polycarbonate Lens
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
* 72” units are made up of 2 x 36” units joined in tandem
at the factory and shipped in a single carton
** 96” units are made up of 2 x 48” units joined in tandem
at the factory and shipped in a single carton
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
Size
T5
T5HO
T8
14
24
(1,2,3 (1,2
lamps) lamps)
17
(1,2,3
lamps)
36
21
39
(1,2,3
(1,2
lamps) lamps)
25
(1,2,3
lamps)
48
28
54
(1,2,3
(1,2
lamps) lamps)
32
(1,2,3
lamps)
24
+ T5HO Lamps only
www.certolux.com
VRW - Confinement
Project
Wall Mount Luminaire
T5, T5HO, T8 Lamps
(Cells, Corridors, Washrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRW series by Certolux is a specification-grade wall mounted luminaire for
maximum security and vandal resistant applications. The clamshell design has
concealed hinges, tamper resistant fasteners, contraband trapping backplate, and
security lenses. This maximizes impact resistance, prevents contraband concealment
and unauthorized fixture tampering/penetration.
3491
ProductSpecifications
Housing
Hinge
Electrical
Precision die formed 12, 14, or 16 gauge
cold rolled steel housing with 12 gauge
continuously welded end plates.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to backplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Die formed 12, 14 or 16 ga. CRS with
embossed mounting holes and
contraband trap.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Lens and Lens Retention
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable V style brackets with through
studs on housing faceplate.
Approvals
Approved to CSA and UL standards.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Vandal
Resistant
Backplate
Dimensions
14.50in
368.3mm
49.50in
1257.3mm
(8) MOUNTING
HOLES IN EMBOSS
WIRING HOLE
6.00in
152.4mm
9.50in
241.3mm
CROSS SECTION
15.00in
381mm
TYPICAL
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRW - Confinement
Project
Wall Mount Luminaire
T5, T5HO, T8 Lamps
(Cells, Corridors, Washrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRW series by Certolux is a specification-grade wall mounted luminaire for
maximum security and vandal resistant applications. The clamshell design has
concealed hinges, tamper resistant fasteners, contraband trapping backplate, and
security lenses. This maximizes impact resistance, prevents contraband concealment
and unauthorized fixture tampering/penetration.
3491
Ordering
VR W
Size
(W x L)
Series
-
/
3491
No.
No. of
of
Lamps
Lamps
Model
1x1
1x2
1x4
2L
3L
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
PL
PLL
/
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
External
No. of
Lens
Lamps
Vandal
Resistant
Ballast
Type
Mount
Type
N - Instant Start
P - Prog. Start
R - Rapid Start
W - Wall
Lamp
Watts
Door/Housing
Gauge
B
C
D
F
G
J
K
See Table
below
- 16 Ga. CRS (Painted)
- 14 Ga. CRS (Painted)
- 12 Ga. CRS (Painted)
- 16 Ga. SS #304 (Painted)
- 14 Ga. SS #304 (Painted)
- 16 Ga. SS #304 (#4 Brushed)**
- 14 Ga. SS #304 (#4 Brushed)**
** Not Available as Housing Material
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
Size
T5
T5HO
T8
1x2
1x4
PL
PLL
13
(2,3
lamps)
1x1
14
24
17
(2,3
(2,3
(2,3
lamps) lamps) lamps)
28
54
32
(2,3
(2,3
(2,3
lamps) lamps) lamps)
40
(2,3
lamps)
+ T5HO Lamps only
www.certolux.com
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D14 Door Frame Full Length Hinge
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T6 Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
VRWB (Bullnose) - Confinement
Project
Wall Mount Luminaire
T5, T5HO, T8 Lamps
(Psychiatric Wards, Cells, Washrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRWB series by Certolux is a specification-grade wall mounted luminaire for
maximum security and vandal resistant applications. The clamshell design has
concealed hinges, tamper resistant fasteners, contraband trapping backplate, and
security lenses. This maximizes impact resistance, prevents contraband concealment
and unauthorized fixture tampering/penetration.
3551
ProductSpecifications
Housing
Hinge
Electrical
Precision die formed 14 gauge cold rolled
steel housing with continuously welded
end plates.
Concealed piano style hinge with .500”
knuckle and .125” pin(Pin is secured to
knuckle) welded to door frame and
fastened to backplate.
All electrical components are CSA or UL
approved. Lamp holders provided ensure
positive lamp retention. Standard
electronic ballasts are programmed or
rapid start, with a THD of less than 20%.
Luminaires are provided with an access
plate, to facilitate wiring to external power
source.
Die formed 14 ga. CRS with embossed
mounting holes and contraband trap.
Door Frame
Single piece precision die formed with
specified material (see product ordering
key). Corners are seam welded. Tamper
resistant TORX® Head with center pin
fasteners secure door frame to housing.
Lens and Lens Retention
Multiple lens choices for both fixture side
and room facing side(see product
ordering key for options). Lens maximum
thickness .625”. The lens is secured with
adjustable V style brackets with through
studs on housing faceplate.
Approvals
Approved to CSA and UL standards.
Finish
The luminaire is in a powder painted
white finish and offers a high reflectivity
coating for improved lighting performance
and efficiency.
Vandal
Resistant
Backplate
Dimensions
10.50in
266.7mm
50.65in
1286.5mm
.875in
22.2mm
EMT ACCESS
(6) MOUNTING HOLES
IN EMBOSSES
8.86in
224.9mm
CROSS SECTION
5.00in
127mm
22.00in
558.8mm
22.00in
558.8mm
TOP VIEW
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
VRWB (Bullnose) - Confinement
Project
Wall Mount Luminaire
T5, T5HO, T8 Lamps
(Psychiatric Wards, Cells, Washrooms)
Type
Date
Product
Code
Approved by
ProductSpecifications - Application
The VRWB series by Certolux is a specification-grade wall mounted luminaire for
maximum security and vandal resistant applications. The clamshell design has
concealed hinges, tamper resistant fasteners, contraband trapping backplate, and
security lenses. This maximizes impact resistance, prevents contraband concealment
and unauthorized fixture tampering/penetration.
3551
Ordering
VR WB
Size
(W x L)
Series
-
/
3551
No. of
Lamps
Up
Model
1x1
1x2
1x4
1
1
2
2
/
/
/
/
/
No. of
Lamps
Down
1L
2L
1L
2L
Vandal
Resistant
Mount
Type
Lamp
Type
Voltage
120
277
347
UNV
UN4
T5
T5HO
T8
PL
PLC
PLL
External
No. of
Lens
Lamps
Ballast
Type
C - 14 Ga. CRS (Painted)
G - 14 Ga. SS #304 (Painted)
K - 14 Ga. SS #304 (#4 Brushed)**
** Not Available as Housing Material
See Table
below
Internal/External Lens
P13 - .125 Prismatic Acrylic
P45 - .125 Clear Polycarbonate
P42 - .156 Prismatic Polycarbonate
P44 - .156 Prismatic Tempered Glass
P43 - .187 Prismatic Polycarbonate
P46 - .187 Clear Polycarbonate
P49 - .187 Clear Tempered Glass
P08 - .250 Clear Polycarbonate
P50 - .250 Clear Tempered Glass
P47 - .375 Clear Polycarbonate
P51 - .375 Clear Tempered Glass
P48 - .500 Clear Polycarbonate
P52 - .500 Clear Tempered Glass
Model Numbers relate to specific designs, refer to product
photo and Dimension sections for additional details.
Lamp Watts
Nom. Lamp Watts
T5HO
T8
1x1
1x2
14
24
17
1x4
28
54
32
PL
PLC
13
13, 26
(3 lamps
max.)
Options
Ballast Options
B01 Ballast Disconnect - In-line Power Disconnect
(CSA-UL Req'd For Voltages above 150v)
B02 Dimming Addressable Digital (DALI)
B03 Dimming Low Voltage
B08 Ballast - High Ballast Factor
B09 Ballast - Low Ballast Factor
B30 Emergency Specified Lighting Battery Pack 1-lamp
B33 Emergency Lighting Battery Pack 1-lamp
B34 Emergency Lighting Battery Pack 2-lamp
Door Frame Options
D14 Door Frame Full Length Hinge
Lamp
Watts
Door/Housing
Gauge
T5
Internal
No. of
Lens
Lamps
- 120V
- 277V
- 347V
- 120-277V
- 347-480V +
N - Instant Start
P - Prog. Start
R - Rapid Start
WB - Wall Bullnose
Size
/
PLL
40
(3 lamps
max.)
+ T5HO Lamps only
www.certolux.com
Packaging Options
K0 Pack Bulk/Pallet Packed and/or wrapped
K1 Pack Single
Fusing and Breaker Options
T6
Fuseholder, In-line Single Pole
Wiring Options
V22 Night Light - Compact Fluorescent
V25 Radio Frequency Filter
V39 Night Light - White LED
Reflector Options
VF1 Full (95% Reflectance) Specular
Approvals Options
X7 Dual CSA/USA
Lamp Options
Z1 Lamps Installed (Specify Type)
BALLAST LAMP COMBINATIONS
B50
B51
B52
B53
B54
B55
B56
B57
B58
B59
B60
B61
B62
B63
B64
B65
B66
B67
B68
B69
B70
B71
B72
B73
B74
B75
B76
B77
Lamp Ballast Comb 1x2-lamp
Lamp Ballast Comb 1x3-lamp
Lamp Ballast Comb 1x4-lamp
Lamp Ballast Comb 2x1-lamp
Lamp Ballast Comb 1x2-lamp + 1x1-lamp
Lamp Ballast Comb 1x3-lamp + 1x1-lamp
Lamp Ballast Comb 2x2-lamp
Lamp Ballast Comb 1x4-lamp + 1x1-lamp
Lamp Ballast Comb 1x3-lamp + 1x2-lamp
Lamp Ballast Comb 1x4-lamp + 1x2-lamp
Lamp Ballast Comb 2x3-lamp
Lamp Ballast Comb 2x4-lamp
Lamp Ballast Comb 3x1-lamp
Lamp Ballast Comb 2x2-lamp + 1x1-lamp
Lamp Ballast Comb 3x2-lamp
Lamp Ballast Comb 3x3-lamp
Lamp Ballast Comb 3x4-lamp
Lamp Ballast Comb 4x1-lamp
Lamp Ballast Comb 3x1-lamp + 1x2-lamp
Lamp Ballast Comb 4x2-lamp
Lamp Ballast Comb 4x3-lamp
Lamp Ballast Comb 5x2-Lamp
Lamp Ballast Comb 2x3-Lamp + 1x2-Lamp
Lamp Ballast Comb 1x3-Lamp + 2x1-Lamp
Lamp Ballast Comb 1x3-Lamp + 1x2-Lamp + 1x1-Lamp
Lamp Ballast Comb 1x4-Lamp + 2x1-Lamp
Lamp Ballast Comb 1x4-Lamp + 2x2-Lamp
Lamp Ballast Comb 2x4-Lamp + 1x2-Lamp
NUMBER OF LAMPS
1
1
-
2
-
3
4
5
2
3
2
1+1
3
B50
-
-
B53
-
-
-
-
-
-
4
2+1
1+1+1
4
3+1
2+2
1+1+1+1
B51
-
-
B52
-
B54
-
-
-
-
-
B55
B56
-
-
-
-
B62
-
-
-
-
-
-
-
-
-
-
-
B67
-
-
-
-
-
-
-
-
NUMBER OF LAMPS
NUMBER
OF
BALLASTS
4+1
3+1+1
3+2
2+2+1
1+1+1+2
4+2
3+3
3+2+1
2+2+2
4+1+1
1
-
-
-
-
-
-
-
-
-
-
2
B57
-
B58
-
-
B59
B60
-
-
-
3
-
B73
-
B63
-
-
-
B74
B64
B75
4
-
-
-
-
B68
-
-
-
-
-
5
-
-
-
-
-
-
-
-
-
-
5
6
NUMBER OF LAMPS
NUMBER
OF
BALLASTS
4+4
4+2+2
3+3+2
2+2+2+2
3+3+3
4+4+2
2+2+2+2+2
4+4+4
3+3+3+3
1
-
-
-
-
-
-
-
-
-
2
B61
-
-
-
-
-
-
-
-
3
-
B76
B72
-
B65
B77
-
B66
-
4
-
-
-
B69
-
-
-
-
B70
5
-
-
-
-
-
-
B71
-
-
8
9
10
12
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Additional
Information
NUMBER
OF
BALLASTS
Cleanroom Classifications
ISO
Maximum Number of Particles in Air
Federal
STD 209E
Class
(particles in each cubic m eter equal to or greater than the specified
size)
Class
Particle size
> 0.1 ìm
> 0.2 ìm
ISO Class
1
10
2
ISO Class
2
100
24
10
4
ISO Class
3
1000
237
102
35
8
1
ISO Class
4
10,000
2,370
1,020
352
83
10
ISO Class
5
100,000
23,700
10,200
3,520
832
29
100
237,000
102,000
> 0.5 ìm
> 1 ìm
> 5 ìm
NA
NA
35,200
8,320
293
1000
ISO Class
7
352,000
83,200
2930
10000
ISO Class
8
3,520,000
832,000
29,300
100000
ISO Class
9
35,200,000
8,320,000
293,000
NA
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010
Additional
Information
ISO Class
6
1,000,000
> 0.3 ìm
IP (Ingress Protection) and NEMA Classifications (comparison)
IP Classifications
NEMA/UL Classifications
Ingress Protection class of enclosures is according to IEC 529 stated in
the form of IP classification. It is a two digit coding system which is
shown below.
NEMA performance criteria and test methods are
used by Underwriters Laboratories as guidelines
for investigation and list of electrical enclosures.
First Digit
Second Digit
Protection against contact and ingress of solid objects
0
No special protection
1
Protected against ingress solid objects with a diameter of
more than 50mm. No protection against deliberate access,
e.g. with a hand, but large surfaces of the body are
prevented from approach
2
Protection against ingress of water
Approximate IP(Ingress Protection) equivalents in red.
0
No special protection
1
Protection against dripping water falling vertically. No
harmful effect must be produced. (vertically falling
drops)
Protected against penetration by solid objects with a
diameter of more than 12mm. Fingers or similar objects
prevented from approach
2
Protection against dripping water falling vertically.
There must be no harmful effect when the equipment
(enclosure) is tilted at an angle up to 15° from its
normal position. (drops falling at an angle)
Protected against ingress of solid objects with a diameter of
more than 2.5mm. Tools, wires etc. with a thickness of more
than 2.5mm are prevented from approach
3
Protection against water falling at any angle up to 60°
from the vertical. There must be no harmful effect
(spray water).
4
Protection against water splashed against the
equipment (enclosure) from any direction. There must
be no harmful effect (splashing water).
4 (X)
5
Protection against water projected from a nozzle
against the equipment (enclosure) from any direction.
There must be no harmful effect (water jet).
12/12K
6
Protection against heavy seas or powerful water jets.
water must not enter the equipment (enclosure) in
harmful quantities (splashing over).
13
1
IP30
4
Protected against ingress of solid objects with a diameter of
more than 1mm. Tools, wires etc. with a thickness of more
than 1mm are prevented from approach
5
Protected against harmful dust deposits. Ingress of dust is
not totally prevented but the dust must not enter in sufficient
quantity to interface with satisfactory operation of the
equipment. Complete protection against contact.
6
Protection against ingress of dust (dust tight). Complete
protection against contact.
7
8
Indoor use to provide a degree of protection against
limited amounts of falling water and dirt.
IP31
3
IP64
3R
IP32
IP66
Outdoor use to provide a degree of protection against
windblown dust, rain and sleet, undamaged by the
formation of ice on the enclosure.
Outdoor use to provide a degree of protection against
rain and sleet, undamaged by the formation of ice on
the enclosure.
Indoor or outdoor use to provide a degree of protection
against splashing water, windblown dust and rain,
hose directed water, undamaged by the formation of
ice on the enclosure. (Resist corrosion).
Indoor use to provide a degree of protection against
dust, falling dirt and dripping non corrosive liquids.
IP65
IP65
Indoor use to provide a degree of protection against
dust and spraying of water, oil and non corrosive
coolants.
Protection against water when the equipment
(enclosure) is immersed in water under defined
conditions of pressure and time. Water must not enter
in harmful quantities (immersion).
The equipment (enclosure) is suitable for continuous
submersion on water under conditions which must be
specified by the manufacturer (submersion).
Additional
Information
3
2
Indoor use primarily to provide a degree of protection
against contact with the enclosure equipment and
against a limited amount of falling dirt.
35 Oak Street, Toronto, ON M9N 1A1
Tel: 647-777-3300 Fax: 416-245-4778
www.certolux.com
A division of Visioneering Corp. Copyright © 2010