VL08 Vandal-Lock Series High Abuse A- 4' Polycarbonate Luminaires for Surface Installation Specifications: Housing/End Caps: Welded one piece construction. Die formed 16 Ga. CRS with continuous welded and ground smooth exposed seams. Reflector: Full reflector panel white powder coat finished (minimum reflectivity 88%). Lens: .187 prismatic polycarbonate standard. Secured in continuous channel using six (6) tamper proof fasteners. Torx drive with center pin reject is standard. See options for other lens and fastener choices. 4.75" Lamps: See lamp options listed below. Lamps supplied by others. Lampholders: Rotary locking lampholders standard for T8 and T5 lamps. Installation Detail Ballast: Standard ballast - Electronic less than 10% THD high performance instant start universal voltage (120-277 volt). See options for other choices. 50.0" 37.0" Finish: White polyseter powder coat finish (1,000 hour salt spray test). 1.75" 3.6" Installation: Four .312” debossed holes for surface mounting. One .875” flattened knockout located on back of housing for wiring. One .875” flattened knockout on each end. Listings: UL and CUL Listed for Damp Locations. IBEW Label. Ordering Information: VL -A - - Series Installation Type Material VL A = Surface 1 = CRS External & Internal 40 = 4' Housing Size 1/T5HO = F54W/T5 54-Watt (G5) 1/T8 = F32T8 32-Watt (G13) 1/T5 = F28W/T5 28-Watt (G5) Lamps -Voltage Options 120V 277V 347V UNV FF = Fuse & Holder FD = Two Fuses & Holders 2/EB = Two Ballasts, (Two Circuits)* EBL = -20°F Electronic Ballast* EBPRS= Program Rapid Start Ballast* 1/EM = 1 Lamp Battery Pack (700L)* 2/EM = 1 Lamp Battery Pack (1300L)* TIG= One-piece TIG Welded Housing NLF = Fluorescent Night Light NLED= LED Night light OH = Oval Head Fasteners AH = Allen Head Fasteners Project: Fixture Type: Catalog Number: Approved by: Kurtzon Lighting / Quality Since 1898 Morris Kurtzon, Incorporated 1420 South Talman Avenue, Chicago, Illinois 60608 773/277-2121 FAX 773/277-9164 © 2008 Website - www.kurtzon.com