LED Outdoor
Canopy Luminaire
Catalog #
Date
Project
LCN3 Series|Surface Mount
Type
Prepared By
Comments
For Surface/Flush Mounted Applications Including
Convenience Store Canopies, Non-IC Accessible Ceilings
in Retail Store Soffits, Entryways, and Drive-Thrus
EnduraLux ™
Specifications
Light Emitting Diodes
Luminaire Housing
Hi-flux/Hi-power white
Die formed aluminum
LEDs produce 130 lumens
lower and upper housing .
(typical) per watt and 70%
Aluminum electrical box
of initial intensity (L70
connected to fixture via
projection) at 60,000 to
threaded aluminum stem
70,000 hours of projected
and has 2 electrical
life when operated at 85°C
entries for thru-way
case / 50°C ambient. The
wiring. Designed for flush
standard 5,000K CCT
mounting onto “single(correlated color
deck” canopies with
temperature) LEDs have a
access above.
typical CRI of 70 and are
Finish
100% mercury & lead free.
Electrostatically applied,
white polyester powder
Optical Systems
coat finish.
The white injection molded
Light-Engine Housing
reflector system produces
Die formed aluminum
IESNA Type 5 distribution.
housing with proprietary
Luminaire is classified as
internal heat dissipation .
Full-Cutoff with 0 lumens
Optical Chamber
produced at or above 90⁰.
The optical chamber
Units provide a typical
consists of tempered glass luminaire efficacy of 85-89
that is sealed to the light
lumens per watt.
engine and the lower
Photometry
housing by die formed
IES Type V, Full-Cutoff
silicone gasket and RTV
distribution. All luminaires
sealant creating an IP66
are photometrically tested
environment to prevent
by a certified independent
ingress of dust or moisture.
testing laboratory in
Weight
accordance with IESNA LM15 lbs. / 6.8 kg.
79 testing procedures.
Patents
Patents pending.
LED
System Lumens
Electrical
Power supply features a Power
Factor of .9 and <20% total
harmonic distortion (THD).
Meets or exceeds FCC CFR Part
15 Class A. Power supply is
factory set at 530mA, drive
current to optimize LED light
output, efficiency and life.
Fixture employs a thermal
sensor that in abnormally high
ambient temperature, drive
current is temporarily reduced
to the fixture to protect the
LEDs and increases as ambient
temperature normalizes.
Electrical Input
Power Supply has 120277Vac universal voltage
input. Optional 347-480Vac
power supply available.
Listings/Ratings/ Warranties
Luminaires are listed by UL for
use in non- IC wet locations in
the United States and Canada,
as well as CE* listed, and are
IP 66 rated. Meets DLC
Qualified Products List
requirements. Five-year
limited warranty is standard
on all components.
Mounting
Surface Mounting - Surface mounted
in new construction or for retrofit
applications. Retrofit simplified with
two included retrofit plates and
neoprene gaskets. Some retrofit
applications may require special
plates or kits. Consult your Leotek
Sales Representative for specifics.
Features
Fixture delivers very uniform light on
the ground as well as vertical surfaces.
The design of the housing and reflector
allows the fixture to blend into the
installation. Designed to quickly and
easily install in new construction or
retrofit existing fixtures with below and
above canopy components utilizing 5
holes, or with 4” round hole. The below
and above deck mounting plates, which
are included with fixture, aided by
neoprene gasketing help ensure a
permanent seal from the elements and
attain wet location listing. Compatible
with motion sensor provided by others.
Certifications
* Note: CE listing only in 110-220V model
Operating Temperature
-40°F to 122°F (-40°C to 50°C)
Luminaire
LCN3-060K
Current
530mA
Watts
104W
per Watt Lumens (CW)
90
9,375
LCN3-060K
700mA*
127W
86
10,907
LCN3-080K
530mA
139W
88
12,251
LCN3-100K
530mA
175W
87
15,116
LCN3-120K
530mA
208W
86
17,966
* Consult factory for availability.
Industry Associations &
Accreditations
LCN3 Series Canopy Luminaire
EnduraLux ™
Ordering Information | Example: LCN3-120K-MV-CW-5S-WH-FDC-530-HBS
LCN3
LCN3
Select
Series
LCN3 Outdoor
Canopy
Luminaire
Select
LED Quantity
060K - 60 LED
080K - 80 LED
100K - 100 LED
120K - 120 LED
Select
Voltage
MV - 120-277Vac
HV - high voltage
transformer for
347- 480Vac*
5S
Nominal Color Distribution
Temperature Pattern
CW - cool
5S - Type 5 VS
white (5000K)
NW - neutral
white (4100K)
WW - warm
white (3000K)
WH
Select
Housing
Color
WH = White
Drive Current
FDC-530 - Fixed
530mA Drive
Current
Select
Options*
F1 - Single Fusing
F2 - Double
Fusing- for 480V
700 * - Factory
Pre-Set 700 mA
Drive Current
* Consult Factory for Availability
Mounting
Canopy Retrofit: Flush Mounting
Dimensions
3” (76.2mm)
10” (255mm)
0.8” (20mm)
1.2” (30mm)
7.4”
(188.6mm)
6.4” (163.1mm)
21.7”
(550.9mm)
Information provided subject to change without notice. | V15-041113
Leotek Electronics USA Corp.
726 South Hillview Drive | Milpitas, CA 95035 | 408.380.1788 | www.leotek.com