KOA
KOA WALL
SBP
KOA
design Silvia Paola Pennacchio
KOA MAXI
KOA MINI
2
KOA is SBP’s answer to functional and intelligent modern industrial lighting. A range of
luminaires that has been designed and produced to offer high performance solutions with
the most efficient LED light sources available on the market, along with ultra modern light
distribution, power supply and light flow control systems.
The KOA series has been designed to offer:
- energy saving, compared to conventional solutions that make use of gas-discharge lamps;
- an extensive range of models;
- robustness and reliability as a result of the materials used;
- high performance lighting in terms of efficiency;
- excellent light engineering performance with specially studied optics to obtain high levels of
uniform lighting;
- quick and simple installation that makes use of rapid external plug-socket connectors;
- rapid hooking device.
KOA is proposed in two sizes:
- KOA MAXI, the large one, which is indicated to light up extensive industrial areas where high
performance and a considerable amount of light are demanded;
- KOA MINI, the small one, designed to light up small industrial areas that both high
performance and a small luminaire.
3
SBP
KOA
KOA
The KOA series is available in two versions that differ for optics type and mounting methods;
hence, they are characterised by the type of application:
- KOA, the version for industrial installations, warehouses and commercial areas, comes with
a strong steel hook that is suitable for chains and metal ropes;
- KOA WALL, the version for outdoor areas of industrial sheds, such as industrial buildings’
boundaries, is completed with a strong steel bracket for wall mounting.
KOA WALL
HEAT DISSIPATION
The large ribs on the back of the body enhance exchange
of the considerable heat generated by LED lights with
the surrounding environment. Moreover, their particular
layout, combined with the geometrical features of the
body, encourages the outflow of rain water, thus avoiding
dangerous stagnation and build-up of dirt that could affect
heat dissipation in time.
The specially designed High Performance multi-lens system
acts as a protective screen, and is directly in contact with the
LED module.
This achieves:
- elimination of insulating air chambers between the LED
module and the protective screen, which prevents air
circulation and heat dissipation;
- direct contact between the lens and the external
environment to allow air circulation and dispersion of heat
generated by the LEDs, to promote maximum duration of
performance in time.
4
ELECTRICAL CONNECTION
All KOA and KOA WALL models are fitted with a quick, waterproof, male-female connector that allows to connect the
luminaire to the mains without opening the device.
Beyond granting a quick installation, this guarantees the
safety of having a product sealed at the factory, and the
certainty that the lighting system is intact; hence, it avoids
accidental damage during the process of connecting the
luminaire to the mains.
Moreover, the system allows to drastically cut down the time
required to connect it, thus saving on installation costs.
On request, the luminaire can
be produced to be connected
in a continuous line.
5
SBP
The Koa series is the result of the experience and thorough knowledge in compliance with applicable
regulations.
This goal has been achieved thanks to:
- a new concept of thermally optimised heat-sink to obtain the utmost LED efficiency in terms of lumen
output and duration;
- optics designed for industrial lighting, produced with special high transmittance plastic polymers to
drastically reduce the losses due to reflections and refractions of the same through deviation devices,
reflection or refraction.
6
S/EW
SYMMETRICAL
EXTRA WIDE OPTICS
ELL
ELLIPTIC OPTICS
SR
STREET OPTICS
K
IN PROG
SS
RE
WOR
The lenses designed for industrial lighting (KOA) and for street lighting (KOA WALL) offer high levels of uniform lighting.
The lens, besides being the first means of lighting control and distribution, primary optics, acts as a protective screen that prevents the
need of a secondary means of lighting control and the external screen. This allows to recover more than 8% of light flow.
The use of specific high transmittance materials that are stabilised with heat and UV radiations ensures high photometric performance and
long duration in time.
A
ASYMMETRICAL OPTICS
PROTECTION AGAINST
IMPACT WITH A BALL
KOA luminaires are also suitable to
light up sports facilities.
Produced entirely with shatterproof materials (there are no glass
parts), prevent the possibility of
damage to objects or people
hypotetically generated by falling
parts. (DIN VDE 0710-B).
7
SBP
KOA
β
α
S/EW
SYMMETRICAL EXTRA WIDE OPTICS
h
KOA MAXI S/EW 32 LED
α
0 [m]
β
Max
[lx]
Med
[lx]
2,4 m
6,0
5,6
1298
770
4,8 m
12,0 11,3
324
193
7,2 m
18,1 17,0
144
86
9,6 m
24,1 22,7
81
48
12,0 m
30,2 28,4
52
31
0 [m]
β
Max
[lx]
Med
[lx]
6,0
5,6
662
395
3,6 m
9,0
8,5
294
176
4,8 m
12,0 11,3
166
99
6,0 m
15,1 14,1
106
63
0 [m]
β
Max
[lx]
Med
[lx]
4,9
1,9
3491
1843
4,8 m
9,8
3,9
873
461
7,2 m
14,7
5,9
388
205
h
KOA MINI S/EW 16 LED
2,4 m
α
ELL
ELLIPTIC OPTICS
h
KOA MAXI ELL 32 LED
2,4 m
α
9,6 m
19,6
7,9
218
115
12,0 m
24,5
9,8
140
74
β
Max
[lx]
Med
[lx]
h
KOA MINI ELL 16 LED
α
0 [m]
2,4 m
4,9
1,9
1783
952
3,6 m
7,4
2,9
793
423
4,8 m
9,9
3,9
446
238
6,0 m
12,4
4,9
285
152
The hook A0675 (optional), which is principally indicated to univocally direct the
luminaire by preventing its accidental rotation, is recommended in combination with
the elliptic optics.
8
KOA WALL
β
α
SR
STREET OPTICS
KOA MAXI SR 32 LED
h
α
0 [m]
β
Max
[lx]
Med
[lx]
2,4 m
5,3
17,7
1191
257
4,8 m
10,5 35,4
298
64
7,2 m
15,8 53,1
132
29
9,6 m
21,1
74
16
12,0 m
26,4 88,5
48
10
0 [m]
β
Max
[lx]
Med
[lx]
5,2
18,6
590
120
3,6 m
7,9
27,9
262
53
4,8 m
10,5 37,2
148
30
6,0 m
13,1 46,5
94
19
KOA MINI SR 16 LED
h
2,4 m
SECURE LIGHT DISTRIBUTION
α
7,8
û
The “Secure Light Distribution” system guarantees a uniform
light distribution also in case of LED inefficiencies without
creating disturbing shadow areas. The Reflex Comfort System
optic has been designed with a double deviation system and
developed so that the light emitted by each LED is distributed
on the entire area to be illuminated, thus creating a layer of light.
Therefore, the light generated is the sum of the layers of light
of the individual LED mounted in the luminaire.
UNIFORM LIGHT DISTRIBUTION
û
SBP has specially studied the lenses to obtain square (S/EW
optics) and rectangular (ELL optics) light distribution to enhance
light uniformity on the ground and optimise the installation.
This has allowed to increase the interaxis between luminaires
with subsequent use of a smaller number of luminaires,
compared to conventional rotosymmetrical optics.
9
SBP
KOA
KOA is a series of strong and efficient LED luminaires designed and produced to light up industrial environments, warehouses and sales
areas. It uses high performance, new generation LED Multichips, and is available in two sizes:
KOA MINI available in the following configurations
- 8LED
-16 LED
-KOA MAXI available in the following configurations
-16 LED
-24 LED
-32 LED
Every KOA model is available with two different specially studied optics that can ensure uniform high performance light
engineering solutions. They are available with 4,000K LED. Versions can be produced with CRI 80 and with 3,000K or 5,000K
colour temperature, on request.
For ceiling installation, Koa comes with a suspension hook and a safety steel wire.
S/EW - SYMMETRICAL EXTRA WIDE OPTICS
with a “butterfly shape” light distribution that projects itself on the floor as a “round-edged square” which is the best to ensure
an optimal uniformity when used for installations such as warehouses and large indoor areas.
120°180°120°
25
105°
105°
90°
90°
75°
100
75°
60°
200
60°
300
45°
45°
400
500
30
15
0
180,0
15
0,0 90,0
cd/klm
30
270,0
GENERAL STORE AREAS INSIDE BUILDINGS
Luminaire used
Quantity of luminaires
Lighted area [m]
h - installation height [m]
I - distance between luminaires [m]
10
KOA MINI
n. 16 LED
KOA MINI
n. 8 LED
KOA MAXI
n. 32 LED
KOA MAXI
n. 24 LED
KOA MAXI
n. 16 LED
25
20
36
30
20
25 x 25 x h 4,5
25 x 25 x h 4,5
50 x 50 x h 12,5
50 x 50 x h 9,5
50 x 50 x h 6,5
4
4
12
9
6
5x5
5x6
8,5x8,5
9x10
10x12,5
Ēm - medium lighting [lx]
504
210
303
201
101
U0 (Emin/Ēm) - general uniformity [lx]
0,61
0,62
0,61
0,62
0,84
Absorption [W]
3375
1400
9720
6300
2700
Reflection [Ro]
30/40/60
30/40/60
30/40/50
30/40/50
30/40/50
KOA MINI
n. 8 LED
KOA MAXI
n. 16 LED
n. 16 LED
n. 24 LED
n. 32 LED
ELL - ELLIPTIC OPTICS
elliptical distribution specially designed for aisles and corridors in warehouses and goods storage departments.
KOA MINI and KOA MAXI are available with 4000K LED.
120°180°120°
25
105°
105°
90°
90°
75°
25
75°
60°
50
60°
75
45°
45°
100
125
30
15
0
180,0
cd/klm
15
30
0,0 90,0
270,0
GENERAL STORAGE RACK AREAS INSIDE BUILDINGS
Luminaire used
Quantity of luminaires
Lighted area [m]
h - installation height [m]
I - distance between luminaires [m]
KOA MINI
n. 16 LED
KOA MINI
n. 8 LED
KOA MAXI
n. 32 LED
KOA MAXI
n. 24 LED
KOA MAXI
n. 16 LED
7
3
8
5
4
25 x 4 x h 4,5
25 x 4 x h 4,5
50 x 4 x h 12,5
50 x 4 x h 9,5
50 x 4x h 6,5
4
4
12
9
6
3,6
8,3
6,5
10
12,5
Ēm - medium lighting [lx]
324
151
311
200
158
U0 (Emin/Ēm) - general uniformity [lx]
0,66
0,56
0,69
0,69
0,58
Absorption [W]
945
210
2160
1050
540
Reflection [Ro]
30/40/60
30/40/60
30/40/50
30/40/50
30/40/50
11
SBP
KOA WALL
KOA WALL is a series of strong and efficient LED luminaires designed and produced to light up areas inside and outside industrial sheds.
Especially suitable for all the pedestrian paths and driveways that surround an industrial and commercial area where outdoor goods
handling and forwarding activities are performed. Just like KOA, KOA WALL too uses high performance, new generation LED Multichips,
and is available in two sizes:
KOA WALL MINI available in the following configurations:
- 8LED
-16 LED
-KOA WALL MAXI available in the following configurations:
-16 LED
-24 LED
-32 LED
KOA WALL is available with specific optics to light up outdoor paths. Based on new generation street lighting, it offers lighting for large
areas by combining a high degree of brightness and uniformity. They are available with 4,000K LED. Versions can be produced with CRI 80
and with 3,000K or 5,000K colour temperature, on request.
All KOA WALL models come with a series of strong steel brackets for wall mounting, it also allows the luminaire to tilt.
SR - STREET OPTICS
120°180°120°
150
105°
105°
90°
90°
150
75°
75°
300
60°
60°
450
45°
45°
600
750
30
15
0
15
V0,0
cd/klm
30
H0,0
LIGHTING OR WORK PLACES
INDOOR
Luminaire used
Quantity of luminaires
Lighted area [m]
h - installation height [m]
I - distance between luminaires [m]
12
OUTDOOR
KOA WALL MINI
n. 16 LED
KOA WALL MINI
n. 8 LED
KOA WALL MAXI
n. 32 LED
KOA WALL MAXI
n. 24 LED
KOA WALL MAXI
n. 16 LED
3
3
4
3
2
25 x 5 x h 3,5
25 x 5 x h 3,5
50 x 15 x h12,5
50 x 13 x h 9,5
50 x 10 x h 6,5
2,80
2,80
12
9
6
14
14
15
25
28
Ēm - medium lighting [lx]
212
107
50
32
23
U0 (Emin/Ēm) - general uniformity [lx]
0,43
0,45
0,54
0,53
0,50
1080
630
270
Absorption [W]
405
210
Reflection [Ro]
30/40/60
30/40/60
KOA WALL MINI
n. 8 LED
KOA WALL MAXI
n. 16 LED
n. 16 LED
n. 24 LED
n. 32 LED
A - ASYMMETRICAL OPTICS
The new optics with asymmetrical emission will soon be available for KOA WALL.
13
SBP
ENERGY
SAVING
The high performance offered by KOA allows to obtain considerable energy saving, compared to conventional solutions. The following are
some comparative tables of the two solutions.
Nominal lumen output [lm]
Real lumen output [lm]
HIGH BAY
250 W ME
18.000
KOA MINI
16 LED
17.280
HIGH BAY
400 W ME
32.500
KOA MAXI
24 LED
25.920
12.600
14.935
22.750
21.967
250 W
Total consumption [W]
lamp wattage
+
38 W
400 W
135 W
(LEDs + drivers)
gear loss
+
60 W
210 W
(LEDs + drivers)
gear loss
54%
ENERGY
SAVING
14
lamp wattage
55%
ENERGY
SAVING
KOA MAXI
SMART
easy
KOA MAXI SMART VERSIONS
Today customers increasingly seek energy saving solutions even for industrial
environments where light is the essential safety factor and the daily companion of work-related activities.
The extreme flexibility of LED and its high performance, combined with the
possibility of linking it to flow control and management systems provided by
modern electronics, allow to create intelligent modern lighting systems that
can adapt to multiple environmental features.
SBP can produce three different special versions, on request, designed to
obtain the utmost energy saving.
KOA MAXI
SMART
plus
KOA MAXI
SMART
detek
Total consumption [W]
50 m
50 m
Quantity of luminaires
n. 30
Lighted area
50x50 m
h - installation height
10 m
R0 - reflection
30/40/50
HIGH BAY
400 W
460
KOA MAXI
24 LED S/EW
210
Ēm - medium lighting
230
210
U0 (Emin/Ēm) - general uniformity
0,47
0,51
Absorption [kW]
13,8
6,3
55%
-7,5 kW
ENERGY
SAVING
15
CUS TO M V ER SI O NS
SBP
KOA MAXI
SMART
easy
The ideal version for premises that need to combine both minimum
constant lighting and effective energy saving.
WIRELESS
ANTENNA
PRESENCE
DETECTOR
1-10 V
ENERGY
SAVING
16
Every KOA MAXI SMART EASY is fitted with an infrared sensor (triggered by the average mass and temperature of a human body) and an
internal interface fitted with a wireless antenna. It acts both as transmitter and receiver, and directly communicates with other luminaires.
Every KOA MAXI SMART EASY that detects the presence of a person, positions the light level at 100% of the flow (FULL LEVEL) and transmits a
wireless signal to other luminaires (within a radius of 50 m), positioning them too at full level. This creates a light spot that dynamically follows
the person by lighting up the surrounding area.
It is only available on KOA MAXI and at a maximum height of 12 m.
KOA MAXI SMART EASY is designed to act on three lighting levels that are set as specified below:
100%
FULL LEVEL:
level reached by the system when it
detects the passage of a person or
receives a radio order from another
device that has detected the passage of
a person. This level persists for a period
of 60 seconds, and can be adjusted as
required.
35%
INTERMEDIATE LEVEL:
standard level at which the luminaire
is positioned when the Smartwalk
sensor does not detect the presence of
people. The level of default light is set
at 35%.
10%
LOW LEVEL:
the level to which the system sets itself
at late night, when nobody is around.
It is based on recognising the virtual
midnight (mean of the last 4 times
the luminaire was switched on). The
default light level is set at 10%.
CUSTOMISATIONS
Lumens level as well as duration periods can be adjusted at will can be customised by
stating personal requirements when the order is placed. Customisation can also be
directly performed on site on luminaires that are installed with a dedicated wireless USB
stick, which can be requested from the Company when the order is placed.
The intervention radius can also be reduced to 50 m, on request. This solution is applied
to maximise energy saving by adjusting the settings to only activate the luminaires
around the temporary work area or for small premises. Said adjustment too can either be
directly requested when the order is placed or directly implemented on site.
17
CUS TO M V ER SI O NS
SBP
KOA MAXI
SMART
plus
It is a complete system for intelligent power systems
that especially feature flexibility.
ENERGY
SAVING
18
-
+
The system is based on a 868 MHz wireless platform and includes luminaires that are fitted with a highly intelligent device for complete
management of light, a complete sensory range to detect the person and lighting levels, and dedicated control stations.
KOA MAXI SMART PLUS allows to create systems that dynamically interact with the surrounding environment by modulating the flow level of
luminaires based on natural light variations or on the specific need by detecting staff in the work place. The entire system is wireless controlled
and needs no additional control line.
System flexibility is highest with a dedicated management software that allows to programme the luminaires as required at any time, even after
installation.
To create or design systems with KOA MAXI SMART PLUS, contact the Company.
TRANSMITTER
Portable switch
RECEIVER
with DALI or 1-10 V output
DALI
1-10 V
WIRELESS CONTROLLER
with occupancy detector
and light sensor
19
CUS TO M V ER SI O NS
SBP
KOA MAXI
SMART
detek
Easiest version;
it is fitted with a presence detector that causes the single
luminaire to switch on or off whenever movement is detected.
PRESENCE
DETECTOR
ENERGY
SAVING
20
KOA
CONSTRUCTION FEATURES
IP 66
0,5
IK10 24J xx9
CLASS I
94
850 °C
1-10 V
Range of indoor and outdoor ceiling-mounted LED fixtures, composed of:
¬ Die-cast aluminium housing chemically pre-treated and painted with
polyester powder coat
¬ Diffuser with integrated louvre in UV and heat stabilised transparent
technopolymer
¬ High-transparency polycabonate lenses for best light transmission
¬ Anti-aging silicone gasket with high resiliency
¬ Electrical connection with outdoor plug-socket quick connector (IP66
rating) that allows connection to mains without opening the luminaire
body, made in PA66 with silver-plated brass contacts, for cables Ø 9 - Ø
12 mm
¬ Light beam obtained by the combination of multiple LED modules
¬ Stainless steel external screws
¬ On request, versions with DALI dimming systems are available
KOA:
¬ Galvanised steel M8 suspension hook
¬ Complete with metal safety cable that guarantees suspension of the
fixture in case of breakage of the main suspension system
¬ When using the product within environments where mineral or
natural oils are present or in atmospheres that are not compatible with
polycarbonate, the protective glass available as accessory shall be used
¬ The dual-hook accessory prevents unexpected and unwanted
rotations of the fixture. It's especially recommended for elliptical-beam
versions
KOA WALL:
¬ Light beam obtained by the combination of multiple LED modules
¬ Powder coated steel bracket
CLEAR CONDITIONS
In order to always provide customers with clear, complete information,
Performance in Lighting has decided to provide the data pertaining to its
LED luminaires in the following ways:
-Nominal lumen indicate the luminous flux produced by the LED source
according to indications from the manufacturer of the LEDs used in the
luminaire. Sometimes this is an average value derived from the range
indicated by the producer.
-Real lumen indicate the luminous flux output of the luminaire. The
real flux is therefore generally lower than the nominal flux because it
depends on the luminaire’s thermal regime and the use of reflectors,
diffusers, screens or lenses to direct the light.
-Wattage drawn indicated in the table includes not only absorption by
the LED light source, but also driver’s loss or other necessary electronic
components of the luminaire. We then indicate the total amount of
energy actually consumed by the luminaire.
With this information, Performance in Lighting wants to help create
more clarity in this sector, the LED luminaire compartment, where it is
sometimes difficult to interpret information and compare products.
21
SBP
81
170
KOA MAXI
520
520
Lamps
W
W
W
n.16 LED - 135 W
n.24 LED - 210 W
n.32 LED - 270 W
LAMPHOLDERPOWER
ILCOS LBS
COLOUR/COS Φ
RAL
CLASS
KELVIN ≥ 0,9 EEI
OPTIC
OPTIC
NOMINAL
REAL
BEAM
LUMEN OUTPUT LUMEN OUTPUT LIFETIMEL °CCODE
NOTES EURO
KOA MAXI S/EW
POWER LED 220/240 V 50/60 HZ
-
n.16 LED - 135 W LED -
94
I
4000 •
-
S/EW
-
17280 lm14835 lm 50000 h L70 -
-
n.24 LED - 210 WLED -
94
I
4000 •
-
S/EW
-
25920 lm21967 lm 50000 h L70 -
-
n.32 LED - 270 WLED -
94
I
4000 •
-
S/EW
-
34560 lm29111 lm 50000 h L70 -
06120594
06113394
06112594
06120794
06113594
06112794
POWER LED DIMMABLE 1-10 V 220/240 V 50/60 HZ
-
n.16 LED - 135 W LED -
94
I
4000 •
-
S/EW
-
17280 lm14836 lm 50000 h L70 -
-
n.24 LED - 210 WLED -
94
I
4000 •
-
S/EW
-
25920 lm21967 lm 50000 h L70 -
-
n.32 LED - 270 WLED -
94
I
4000 •
-
S/EW
-
34560 lm29111 lm 50000 h L70 -
LAMPHOLDERPOWER
ILCOS LBS
COLOUR/COS Φ
RAL
CLASS
KELVIN ≥ 0,9 EEI
OPTIC
OPTIC
NOMINAL
REAL
BEAM
LUMEN OUTPUT LUMEN OUTPUT LIFETIMEL °CCODE
NOTES EURO
KOA MAXI ELL
POWER LED 220/240 V 50/60 HZ
-
n.16 LED - 135 W LED -
94
I
4000 •
-
ELL
-
17280 lm13279 lm 50000 h L70 -
-
n.24 LED - 210 WLED -
94
I
4000 •
-
ELL
-
25920 lm19807 lm 50000 h L70 -
-
n.32 LED - 270 WLED -
94
I
4000 •
-
ELL
-
34560 lm26272 lm 50000 h L70 -
06120994
06113794
06112994
POWER LED DIMMABLE 1-10 V 220/240 V 50/60 HZ
-
n.16 LED - 135 W LED -
94
I
4000 •
-
ELL
-
17280 lm13279 lm 50000 h L70 -
n.24 LED - 210 WLED -
94
I
4000 •
-
ELL
-
25920 lm19808 lm 50000 h L70 -
06121194
06113994
-
-
n.32 LED - 270 WLED -
94
I
4000 •
-
ELL
-
34560 lm26273 lm 50000 h L70 -
06113194
KOA MAXI
0,047 m2
Ø 9÷12
Min 200 mm
H07RN-F 3G1,5
3x2,5 mm2
max 13 kg
22
0,270 m2
81
170
KOA MINI
410
410
Lamps
W
W
n.16 LED - 135 W
n.8 LED - 70 W
LAMPHOLDERPOWER
ILCOS LBS
COLOUR/COS Φ
RAL
CLASS
KELVIN ≥ 0,9 EEI
OPTIC
OPTIC
NOMINAL
REAL
BEAM
LUMEN OUTPUT LUMEN OUTPUT LIFETIMEL °CCODE
NOTES EURO
KOA MINI S/EW
POWER LED 220/240 V 50/60 HZ
-
n.16 LED - 135 W LED -
94
I
4000 •
-
S/EW
-
17280 lm14935 lm 50000 h L70 -
-
n.8 LED - 70 W LED -
94
I
4000 •
-
S/EW
-
8640 lm 7584 lm 50000 h L70 -
06155994
06156194
06126994
06127594
POWER LED DIMMABLE 1-10 V 220/240 V 50/60 HZ
-
n.16 LED - 135 W LED -
94
I
4000 •
-
S/EW
-
17280 lm14935 lm 50000 h L70 -
-
n.8 LED - 70 W LED -
94
I
4000 •
-
S/EW
-
8640 lm 7584 lm 50000 h L70 -
LAMPHOLDERPOWER
ILCOS LBS
COLOUR/COS Φ
RAL
CLASS
KELVIN ≥ 0,9 EEI
OPTIC
OPTIC
NOMINAL
REAL
BEAM
LUMEN OUTPUT LUMEN OUTPUT LIFETIMEL °CCODE
NOTES EURO
KOA MINI ELL
POWER LED 220/240 V 50/60 HZ
-
n.16 LED - 135 W LED -
94
I
4000 •
-
ELL
-
17280 lm13590 lm 50000 h L70 -
06156094
-
n.8 LED - 70 W LED -
94
I
4000 •
-
ELL
-
8640 lm 6942 lm 50000 h L70 -
06156294
06127294
06127894
POWER LED DIMMABLE 1-10 V 220/240 V 50/60 HZ
-
n.16 LED - 135 W LED -
94
I
4000 •
-
ELL
-
17280 lm13590 lm 50000 h L70 -
-
n.8 LED - 70 W LED -
94
I
4000 •
-
ELL
-
8640 lm 6942 lm 50000 h L70 -
KOA MINI
Ø 9÷12
0,035 m2
Min 200 mm
H07RN-F 3G1,5
3x2,5 mm2
max 11 kg
0,149 m
2
23
SBP
KOA WALL MAXI
81
161
207
120
520
600
Lamps
W
W
W
n.16 LED - 135 W
n.24 LED - 210 W
n.32 LED - 270 W
LAMPHOLDERPOWER
ILCOS LBS
COLOUR/COS Φ
RAL
CLASS
KELVIN ≥ 0,9 EEI
OPTIC
OPTIC
NOMINAL
REAL
BEAM
LUMEN OUTPUT LUMEN OUTPUT LIFETIMEL °CCODE
NOTES EURO
KOA WALL MAXI SR
POWER LED DIMMABLE 1-10 V 220/240 V 50/60 HZ
-
n.16 LED - 135 W LED -
94
I
4000 •
-
SR
-
17280 lm14845 lm 50000 h L70 -
-
n.24 LED - 210 WLED -
94
I
4000 •
-
SR
-
25920 lm22162 lm 50000 h L70 -
-
n.32 LED - 270 WLED -
94
I
4000 •
-
SR
-
34560 lm29285 lm 50000 h L70 -
KOA WALL
MAXI
Min 200 mm
0,060m2
06138594
06137994
06137394
Min 200 mm
Ø 9÷12
90°
NO
H07RN-F 3G1,5
3x2,5 mm2
max 14 kg
24
0,270 m2
KOA WALL MINI
81
161
207
120
410
545
Lamps
W
W
n.16 LED - 135 W
n.8 LED - 70 W
LAMPHOLDERPOWER
ILCOS LBS
COLOUR/COS Φ
RAL
CLASS
KELVIN ≥ 0,9 EEI
OPTIC
OPTIC
NOMINAL
REAL
BEAM
LUMEN OUTPUT LUMEN OUTPUT LIFETIMEL °CCODE
NOTES EURO
KOA WALL MINI SR
POWER LED DIMMABLE 1-10 V 220/240 V 50/60 HZ
-
n.16 LED - 135 W LED -
94
I
4000 •
-
SR
-
17280 lm14515 lm 50000 h L70 -
-
n.8 LED - 70 W LED -
94
I
4000 •
-
SR
-
8640 lm 7471 lm 50000 h L70 -
KOA WALL
MINI
Min200 mm
0,035 m2
NO
0,149 m2
06135394
06135694
Min200 mm
Ø 9÷12
90°
H07RN-F 3G1,5
3x2,5 mm2
max 12 kg
25
SBP
95
150
ACCESSORIES
237
0,037 m2
A0675
DESCRIPTION
90°
A0676 KOA MAXI
A0685 KOA MINI
A0677 KOA MAXI
A0686 KOA MINI
CODE
A0675 Double hook KOA MINI / MAXI
Securing device with two hooks, suitable for KOA MINI and KOA MAXI. It includes a shaped bracket
made of strong zinc-plated sheet steel and two steel hooks. It is mainly indicated to univocally
direct the luminaire, preventing its accidental rotation.
It is strongly recommended for elliptical optic versions.
14174920
A0676 Bell diffuser KOA MAXI
A0685 Bell diffuser KOA MINI
They complete the product by aesthetically mellowing the “industrial” look. Hence, they are ideal
for indoor sales premises. Available both for KOA MINI (A0685) and KOA MAXI (A0676), they are
made of shock-resistant opaline polycarbonate.
14175020
A0677 Protective glass MAXI
A0686 Protective glass MINI
They allow the product to be installed in any room where there might be chemical substances
that are not compatible with the polycarbonate of the lenses. Hence, they are ideal for industrial
premises that contain mineral and natural oils. Available both for KOA MINI (A0686) and KOA MAXI
(A0677), they are made of extra clear thermally tempered glass and have an expanded silicone
gasket that is directly placed on the glass surface.
14175120
A0689 KOA shaped hook
14461220
14460720
14460820
SPECIAL VERSIONS
Upon request, Koa can be fit with dedicated power supply systems such as:
- automatic power reduction (APR) - supplied with power supply units that can automatically reduce the flow by 50% for a
specific period, based on the virtual midnight (defined as the period of time calculated from on to off of the fixture).
- DALI dimming.
PROTECTIONS
KOA WALL uses a series of electronic power supply units that are protected against voltage overloads (3 kV) from the mains.
On request, luminaires can be supplied with an SPD (Surge Protection Device) for peaks up to 10 kV.
26
27
The data contained in this catalogue is for reference purposes only and does not involve any commitment by Performance in Lighting S.p.A., which
reserves the right to make all necessary changes without prior notice. Partial or complete reproduction of this catalogue is forbidden.
SBP® and SBP URBAN LIGHTING® are brands of
PERFORMANCE IN LIGHTING s.p.a.
via Provinciale, 57 - 24050 Ghisalba (BG) - Italia
info@sbp-pil.com
EXPORT DEPARTMENT
Tel. +39 0363 94 06 22
Fax +39 0363 94 06 99
euroexport@sbp-pil.com
worldexport@sbp-pil.com
UK - Performance in Lighting (UK) Limited
Imex Spaces Business Centre
Oxleasow Road, East Moons Moat
Redditch
Worcestershire B98 0RE
Tel. +44 (0) 1527 830439
Fax +44 (0) 1527 830440
info1@pil-uk.com
MADE IN ITALY
DP000095 - 20150624
www.performanceinlighting.com