GLS5010PF-R
o
8
r
t
spi
g
g
abi
t ac
Rk o
m
unt oEPwi
st
ch i
w
t
h S2
FP
Features:
• Fully IEE802.3af standard compliant
• Support PoE power up to 15.4W/25.5W for each PoE ports
• Auto detected powered device(PD).
• 10/100/1000Mbps auto-sensing.
• Plug and play,no configuration required.
Introduction:
This Acorid PoE switch provides power and data from a single point,
This GLS5010PF-R provides a compact solution that fits nicely into a situ
using Power over Ethernet(PoE) over a single Cat-5 cable. GLS5010PF-R
-ationwhere low-port density is desired for specific areas or extension of the
s e r i e s c a n b e u s e d f o r a n y 10/100/1000Mbps link and supply industry
network. It comes with 8 PoE-capable Gigabit copper ports to connect to your
-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives
PoE end devices and two additional dedicated Gigabit Fiber ports for uplinks
power to 802.3af end devices,In addition,the PoE switch automatically
with greater distance.
determines PoE requirements, speed, duplex,.Easy to operate and
reliable.
Speciafication:
Network
Standards
• IEEE 802.3 10BASE-T
• Operating temperature: 32°to 122°F (0°to 50°C)
• IEEE 802.3u 100BASE-TX
• Storage temperature: -4°to 158°F (-20°to 70°C)
• Operating humidity: 90% maximum
• IEEE 802.3ab 1000BASE-T
Environmental
Specifications
• IEEE 802.3z 1000BASE-X
• relative humidity, non-condensing
• IEEE 802.3x full-duplex flow control
• Storage humidity: 95% maximum
• IEEE 802.3af/at (Power over Ethernet )
• relative humidity, non-condensing
• Operating altitude: 10,000 ft (3,000 m) maximum
• Power consumption: 147 W maximum
PoE power
• Storage altitude: 10,000 ft (3,000 m) maximum
100-240VAC/50-60-Hz universal input
• Per port (10/100 and Gigabit): Link/activity, speed
• PoE budget: 130W
Network Ports
• 8 10/100/1000 Mbps auto sensing Gigabit Ethernet
LEDs
• Per device: Power, Fan, PoE Max
• Per PoE port: PoE Power, PoE fault
• 2 10/10/1000MBPS SFP slots
• UL/cUL 60950-1
Physical
Specifications
• Dimensions: (W x D x H): 328 x 169 x 43 mm
• CE EN 60950-1
• Weight: 1.68 kg (3.7 lb)
Safety
• CB
• CE EN 55022, EN 61000 and EN 55024
Electromagnetic
Emissions
• CCC
• KCC
• FCC Part 15 Class B
• Category 5 UTP Network cables or above
• VCCI Class B
• Network card for each PC
• C-Tick
System
Requirements
• Network software (e.g., Windows)
• Web browser (e.g., Internet Explorer 6.0 or higher,
Netscape 6.0 orhigher)
Ordering Information:
Application Diagram
• GLS5010PF-R, 8 ports 10/100/1000Mbps PoE switch with 2SFP slots,
Power
IEEE802.3af/at.
PoE i
W
f
i PA
m
o
n
i
t
o
PoE PIh
P
one
r
i
n
g
c
e
n
t
e
r
PoE PI
Camer
a
PoE
Power
+Dat
a
PoEI
PCamer
a
Power
Dat
a
Power
Dat
a