Sentry Series
4’ LED Parking Garage Luminaire
LED Light Engine Lumens
LED Module
LG IT 50LED 4000K
Driver
LG 55W 420 mA
2-Rows of 2
5,602 lm, 51.7W, 108lm/W
Housing
Compression molded self-extinguishing
fiberglass reinforced polyester compound
with UL 5VA flame rating (ASTM D635-74).
F1 rating.
Gasketing
En-Seal ™ continuous perimeter poured
gasket assures lens seal to housing.
Electrical Chassis
4ARS15 Shallow Crepe Acrylic lens, DC-2A die cast aluminum end
plug and tamper-proof stainless steel LSS-3TP latches shown
Description
The Sentry LED Parking Garage Luminaire
is a unique linear solution for modern
parking garages. LED boards are mounted
on an internal angled gear tray and feature
a specular, high reflectance center “V”
reflector for broad lateral light distribution.
A separate driver tray provides thermal
isolation for long driver life. The Sentry
housing is sealed against dust and
moisture and available in a variety of lens,
latch, and wire-entry configurations.
Features
•
•
•
•
•
•
Applications
Parking garages
Certifications
•
•
•
•
•
•
UL/cUL recognized component
Wet Location listed
IP65 (Standard 6-latch configuration)
IP66 & IP67 (Optional 8-latch
configuration)
40° C ambient temperature rating
when used with LGIT light engines.
F2402RLED-21B3 fixture kit is DLC
qualified.
•
•
Rigid one piece housing construction.
Standard 6-latch (IP65) or optional
8-latch (IP66 & IP67) housings.
En-seal™ gasketing provides superior
resistance to moisture absorption
versus conventional gasketing.
Standard suitcase style latches.
Molded latch pockets compatible
with standard and tamper-proof
latches in Celcon, stainless steel, and
polycarbonate.
Gear trays secured to #10-32 brass
studs molded into housing via
threaded hex steel mounting standoffs.
LED Module tray available for two
rows of nominal 22” LED boards.
LED Module tray suspends from
housing by two security straps during
servicing.
Gear trays constructed of high reflective,
22-gauge, pre-painted steel.
Light Engine
50 diode LED module available in 4000K
from LGIT with 50,000 hour L70 life.
Constant current drivers with 0-10V
dimming to 10% and 120-277V input
available from LGIT.
Conduit Entry
Standard housings available with one 7/8”
conduit entry point on either or both ends.
Consult Sales for other opening sizes or for
top openings.
Lens
Inline thermal-formed lenses available in
crepe pattern acrylic only.
Mounting
Standard stainless steel mounting brackets
(BRKTS22PK) clip to housing for surface or
all-thread pendant mounting. Consult Sales
for chain or cable mounting or for housings
with 1/4x28 external brass studs compatible
with BRKT1 galvanized steel bracket for
flush mounting.
Please contact A.L.P. for pricing and delivery.
All specifications subject to change without notice.
A.L.P. assumes no responsibility for these materials in
any luminaire or application.
The product is an OEM component kit requiring final
assembly by a qualified OEM fixture manufacturer.
A.L.P.
6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alplighting.com
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV#3 SENTRY4LEDPARK012016
Sentry Series
4’ LED Parking Garage Luminaire
EXPLODED VIEW
LED light source and luminaire specifications
Latches (4)
Wire entry plug
(0, 1 or 2)
F2402RLED-21B2
Housing (1)
Driver Tray (1)
Lanyard (2)
Angled LED
Module Tray (1)
Specification
4’ Sentry
Input Wattage
51.70
Delivered Lumens (lms)
5602
Efficacy (LpW)
Reflector (1)
Standoff (2)
Lens (1)
Color Rendering Index (CRI)
83.5
Color Temperature (CCT) k
4233
Dimming
0-10v
Rated Life (L70)
50000
Warranty
5 years
Voltage (V)
120-277v
Operating Frequency (Hz)
TOP VIEW
108.35
50/60
UL
Yes
FCC
Compliant
49-7/8”
38-3/4” Opt Stud
7”
41-1/2”” Opt back holes
SIDE VIEW
END VIEW
1-3/8”
3-1/8”
4-7/8”
1-3/4”
1-3/8”
3-1/8”
5”
1-7/8”
6-5/8”
7”
MTARS Lens
1-3/8”
3-1/8”
5-7/8”
2-3/4”
6-5/8”
7”
6-5/8”
7”
Shallow Lens
Deep Lens
4ARS15 Lens
Notice
A.L.P. assumes no responsibility for suitability of these
materials in any luminaire or application. Please test for fit and
function prior to ordering project quantities.
4ARS_
Shallow Acrylic Crepe
While A.L.P. utilizes IESNA testing procedures and believes our
testing results to be accurate, A.L.P. provides photometry for
reference only. Actual results will vary based on the actual
light source(s) and power source(s) used, i.e. ballast, driver,
generator, etc. and the combinations in which they are used,
as well as operating temperatures, and other electrical and
environmental variables. We urge that customers perform their
own fixture qualifications prior to making performance-based
claims. In no event will A.L.P. be liable for any loss or damage,
including without limitation, indirect or consequential loss or
damage in connection with the use of this information.
A.L.P.
6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alplighting.com
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV#3 SENTRY4LEDPARK012016
Sentry Series
4’ LED Parking Garage Luminaire
HOUSING (Select One)
Contact Sales to order housing with top holes, 1-1/8” or 1-1/4” holes
Part Number
Description
IP Rating
End Wiring Holes
4F-0-GT
4’ Sentry Housing
IP65 1
None
4F-1-GT
4’ Sentry Housing
IP65 1
7/8” hole on one end only
4F-18-GT
4’ Sentry Housing
IP66 and IP67 2
7/8” hole on one end only
4F-2-GT
4’ Sentry Housing
IP65 1
7/8” hole on both ends
4F-28-GT
4’ Sentry Housing
IP66 and IP67 2
7/8” hole on both ends
GEAR TRAY (Select one)
Part Number
Description
4’ Sentry 2-board row 37º angled LED module gear tray
SENTGT4P38LED
CENTER REFLECTOR (Select one)
Part Number
Description
SENTGT4-LED-R
4’ Sentry LED Parking Garage Center Specular V-Reflector
LED DRIVER GEAR TRAY (Select one)
Part Number
Description
SENTGT4-LED-B
4’ Sentry LED driver gear tray
LATCHES (Select four)
Part Number
Description
LCW
White Celcon latch
LCWTP3
Tamper-proof white Celcon latch with nut and screw
LPC
White polycarbonate latch
LPCTP3
Tamper-proof white polycarbonate latch with nut and screw
LSS-3
Stainless steel latch
LSS-3TP
Tamper-proof stainless steel latch with nut and screw
WIRE ENTRY PLUGS (Select none, one or two depending on housing selected)
Part Number
Description
FEPW
White 7/8” dry location plug
LTP088
White 7/8” liquid tight plug
DC-2A
7/8” die cast aluminum fitting assembly for 1/2” rigid conduit3
LTF-01 Bulk Kit
7/8” liquid tight power cord fitting
FQC WOG-S
Flexible quick connector for 1/2” EMT. See FMC sheet for other configs.4
LENS (Select one)
Part Number
Description
4ARS_
4’ Shallow acrylic lens in crepe pattern. Indicate 00 for 50% DR, or 15 for 15%
DR.
HOUSING MOUNTING BRACKET (Select one)
Part Number
Description
BRKTS22PK
Sentry stainless steel strap bracket, 2-pack
BRKT 1
External stud mounting bracket 5
MISCELLANEOUS PARTS
Part Number
Description
10-32MFSTANDOFF Threaded hex steel mounting standoff for 1-row LED module gear tray 6
LANYARD
White Celcon security strap, 2-pack
NUT1001
#10-32x3/8” steel hex locking nut for TRAYLAT attachment to housing
SCR4001
#4-40 x .250” LED board screws (4 required per 2’ LED board)
SC8GND
#8-32x3/8” green ground screw
OPTIONAL LED DRIVERS (Select one)
Part Number
Description
LGITDRV-37W
LGIT 37W, 520mA driver. 120-277V, 0-10V dim.
LGITDRV-55W
LGIT driver, 55W,420mA 4-board driver for 2-row tray. 120-277V, 0-10V dim
OPTIONAL 2’ LED MODULES (Select two)
Part Number
Description
LGITLED50-40K
LGIT 50 LED, 4000K Board7
OPTIONAL ACCESSORIES
Part Number
Description
TAMPER BIT 3
Driver bit for TAMPERPRUF screw used in LCWTP3, LPCTP3, & LSS-3TP
TAMPER BIT 8
Driver bit for tamper-proof snake eye drive screw, compatible with LSS-3
Ordering Notes:
1. Requires six latches.
2. Requires 8 latches.
3. Apply silicone sealant to internal threads for
wet location use.
4. Requires housing with 1-1/4” end opening(s);
Contact Sales.
5.
6.
7.
Qty/Case
30
30
30
30
30
GEAR TRAYS
SENTGT4P38LED
DRIVER TRAY
Qty/Case
500
Qty/Case
250
SENTGT4-LED-B
CENTER REFLECTOR
SENTGT4-LED-REF
LATCHES
LCW
LCWTP3
LPC
LPCTP3
LSS-3
LSS-TP3
WIRE ENTRY PLUGS
FEPW
Qty/Case
30
LTP088
DC-2A
Qty/Case
80
100
Requires housing with external brass stud.
Contact Sales.
Two required. Requires NUT1001 nut.
3000K, 3500K, and 5000K CCT available by
special order. See Customer Service.
FQC WOG-S
+ FQC-WG
LENSES
4ARS_
HOUSING MOUNTING BRACKETS
BRTKS22PK
BRTK 1
MISCELLANEOUS PARTS
LANYARD
STANDOFF
OPTIONAL ACCESSORIES
TAMPER BIT 8
TAMPER BIT 3
Quantities are one each unless otherwise indicated.
A.L.P.
6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alplighting.com
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV#3 SENTRY4LEDPARK012016
Sentry Series
4’ LED Parking Garage Luminaire
LED PARKING GARAGE FIXTURE KIT ORDERING
Series
Module Configuration
F240 = 4’ Sentry
Housing
2RLED = 2 LED Board Rows
-
Gear Tray
Driver
LED Module
Lens
2 = 37 ° Angled
Gear Tray
1 = LGIT 55W
400 mA driver
B = LGIT 50
LED 4000K
module
1
3
4
5
6
7
=
=
=
=
=
=
4PPS00 4’ Shallow Prismatic Polycarbonate
4ARS15 4’ Shallow Crepe Acrylic, 15% DR
4ARS00 4’ Shallow Crepe Acrylic, 50% DR
4MTARSMI 4’ Tapered Acrylic, 15% DR
4MTARSHI4’ Tapered Acrylic, 50% DR
4MTARSLED 4’ Tapered Acrylic Frosted
DLC Qualified Kit Configurations -Application Category #5
• F2402RLED-21B3
A.L.P.
6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alplighting.com
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV#3 SENTRY4LEDPARK012016