Sentry Series
2’ LED Gear Tray Type
LED Light Engine Lumens
LED Module
LG IT 50LED 4000K
Driver
LG 37W 520 mA
2-Rows
4,021 lm, 36W, 112lm/W
Housing
Compression molded self-extinguishing
fiberglass reinforced polyester compound
with UL 5V flame rating (ASTM D635-74).
F1 weatherability rating.
Gasketing
En-Seal ™ continuous perimeter poured
gasket assures lens seal to housing.
Electrical Chassis
2ARS Shallow Crepe lens, LTP088 liquid tight end plug & tamper-proof LCWTP3 latches shown.
Description
Features
Sentry LED combines the benefits of LED
technology with the features OEMs have
come to rely upon in the flagship Sentry
series. Sentry LED utilizes gear tray
internal construction for cost effectiveness
and functional practicality by minimizing
required internal metal components.
Drivers mount to the driver tray for thermal
isolation. The Sentry housing is sealed
against dust and moisture and available
in a variety of lens, latch, and wire-entry
configurations
•
•
Applications
•
Ideal for use in dusty, dirty, or wet
environments including food processing,
cold storage, kitchens, parking garages,
car washes, covered canopies, pedestrian
tunnels, concourses, and industrial.
Certifications
•
•
•
•
•
•
UL/cUL recognized component
Wet Location listed
IP65
40° C ambient temperature rating
when used with LGIT light engines.
F2202RLED-11B3 fixture kit is DLC
qualified.
NSF International certified for NSF/
ANSI Standard 2 – Food Equipment
A.L.P.
6333 Gross Point Road, Niles, IL 60714
•
•
•
•
•
•
Rigid one piece housing construction.
Two 1/4-28 brass studs molded into
back of housing for attachment of
optional mounting brackets.
En-seal™ gasketing provides superior
resistance to moisture absorption
versus conventional gasketing.
Lens retained by four suitcase style
latches.
Molded latch pockets compatible
with standard and tamper-proof
latches in Celcon, stainless steel, and
polycarbonate.
Gear trays secured to #10-32 brass
studs molded into housing via
threaded hex steel mounting standoffs.
LED Module tray available for two
rows of nominal 22” LED boards.
LED Module tray attaches to two
plastic or steel TrayLats for easy, toolless removal.
LED Module tray suspends from
housing by two security straps during
servicing.
Gear trays constructed of 83% reflective,
22-gauge, pre-painted steel.
Light Engine
50 diode LED module available in 4000K
from LGIT with 50,000 hour L70 life.
Constant current drivers with 0-10V
dimming and 120-277V input available
from LGIT.
Conduit Entry
Standard housings available with one 7/8”
conduit entry point on either or both ends.
Consult Sales for other opening sizes or for
top openings.
Lens
Inline thermal-formed lenses available in
tapered or shallow profile in crepe pattern
acrylic or frosted acrylic, or prismatic
polycarbonate.
Mounting
Standard stainless steel bracket
(BRKTS22PK) for surface or all-thread
pendant mounting or optional galvanized
steel bracket (BRKT 1) for surface mounting.
Consult Sales for chain or cable mounting
options.
Please contact A.L.P. for pricing and delivery.
All specifications subject to change without notice.
A.L.P. assumes no responsibility for these materials in
any luminaire or application.
The product is an OEM component kit requiring final
assembly by a qualified OEM fixture manufacturer.
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alplighting.com
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV# SENTRY2LED012116
Sentry Series
2’ LED Gear Tray Type
LED light source and luminaire specifications
EXPLODED VIEW
Latches (4)
Wire entry plug
(0, 1 or 2)
F2202RLED-11B3
Housing (1)
Specification
2’ Sentry
Input Wattage
35.58
Delivered Lumens (lms)
4021
Efficacy (LpW)
Driver Tray (1)
Traylat (2)
LED Module Tray (1)
Lanyard (2)
Color Rendering Index (CRI)
84.2
Color Temperature (CCT) k
4193
Dimming
0-10v
Rated Life (L70)
50000
Warranty
5 years
Voltage (V)
120-277v
Operating Frequency (Hz)
Lens (1)
113.01
50/60
UL
Yes
FCC
Compliant
17-1/2”
Opt. Back Hub Loc.
TOP VIEW
14-3/4” Stud
7”
26”
1/4 - 28 Brass Studs
SIDE VIEW
3-1/8"
26”
2MTARS100F Lens
Note: Brass Studs on Inside of Unit are 10-32
END VIEW
1-3/8”
3-1/8”
1-3/8”
3-1/8”
4-7/8”
1-3/4”
5”
1-7/8”
6-5/8”
7”
6-5/8”
7”
Tapered Lens
Shallow Lens
2MTARS_
Tapered Acrylic or Polycarbonate
A.L.P.
6333 Gross Point Road, Niles, IL 60714
2ARS_
Shallow Acrylic Crepe
Notice
2APP00
Shallow Polycarbonate Prismatic
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alplighting.com
A.L.P. assumes no responsibility for suitability of these
materials in any luminaire or application. Please test for fit and
function prior to ordering project quantities.
While A.L.P. utilizes IESNA testing procedures and believes our
testing results to be accurate, A.L.P. provides photometry for
reference only. Actual results will vary based on the actual
light source(s) and power source(s) used, i.e. ballast, driver,
generator, etc. and the combinations in which they are used,
as well as operating temperatures, and other electrical and
environmental variables. We urge that customers perform their
own fixture qualifications prior to making performance-based
claims. In no event will A.L.P. be liable for any loss or damage,
including without limitation, indirect or consequential loss or
damage in connection with the use of this information.
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV# SENTRY2LED012116
Sentry Series
2’ LED Gear Tray Type
HOUSING (Select One)
Contact Sales to order housing with top holes, 1-1/8” or 1-1/4” holes
Part Number
Description
IP Rating
End Wiring Holes
2F-2-GTBS
2’ Sentry Housing
IP65
7/8” on both ends
GEAR TRAY (Select one)
Part Number
Description
SENTRYGT2U-LED 2’ Sentry 2-board row LED module gear tray
LED DRIVER GEAR TRAY (Select one)
Part Number
Description
SENTGT2-LED-B
2’ Sentry LED driver gear tray
LATCHES (Select four)
Part Number
Description
LCW
White Celcon latch
LCWTP3
Tamper-proof white Celcon latch with nut and screw
LPC
White polycarbonate latch
LPCTP3
Tamper-proof white polycarbonate latch with nut and screw
LSS-3
Stainless steel latch
LSS-3TP
Tamper-proof stainless steel latch with nut and screw
WIRE ENTRY PLUGS (Select none, one or two depending on housing selected)
Part Number
Description
FEPW
White 7/8” dry location plug
LTP088
White 7/8” liquid tight plug
DC-2A
7/8” die cast aluminum fitting assembly for 1/2” rigid conduit1
LTF-01 Bulk Kit
7/8” liquid tight power cord fitting
FQC WOG-S
Flexible quick connector for 1/2” EMT. See FMC sheet for other configs.2
LENS (Select one)
Part Number
Description
2MTARS_
2’ Tapered acrylic lens with prismatic lengthwise pattern & crepe end pattern
Indicate LED for Frosted 6 High Diffusion 85% trans., EX for 100% DR, HI for
50% DR, MI for 15% DR, PC for Polycarb.
2ARS_
2’ Shallow acrylic lens in crepe pattern. Indicate 00 for 50% DR, or 15 for
15% DR.
2PPS00
2’ Shallow polycarbonate lens in prismatic pattern
HOUSING MOUNTING BRACKET (Select one)
Part Number
Description
BRKTS22PK
Sentry stainless steel strap bracket, 2-pack
BRKT 1
External stud mounting bracket
MISCELLANEOUS PARTS
Part Number
Description
TRAYLAT
White Celcon gear tray mounting clip, 2-pack 3,4
TRAYLATSS
Stainless steel gear tray mounting clip, 2-pack 3,4
LANYARD
White Celcon security strap, 2-pack
NUT1001
#10-32x3/8” steel hex locking nut for TRAYLAT attachment to housing
SCR4001
#4-40 x .250” LED board screws (4 required per 2’ LED board)
SC8GND
#8-32x3/8” green ground screw
OPTIONAL LED DRIVERS (Select one)
Part Number
Description
LGITDRV-37W
LGIT 37W, 520mA driver. 120-277V, 0-10V dim.
OPTIONAL 2’ LED MODULES (Select two)
Part Number
Description
LGITLED50-40K
LGIT 50 LED, 4000K Board7
OPTIONAL ACCESSORIES
Part Number
Description
TAMPER BIT 3
Driver bit for TAMPERPRUF screw used in LCWTP3, LPCTP3, & LSS-3TP
TAMPER BIT 8
Driver bit for tamper-proof snake eye drive screw, compatible with LSS-3
Qty/Case
30
GEAR TRAYS
Qty/Case
500
Qty/Case
250
SENTRYGT2U-LED
SENTGT2-LED-B
LATCHES
LCW
LCWTP3
LPC
LPCTP3
LSS-3
LSS-TP3
WIRE ENTRY PLUGS
FEPW
Qty/Case
30
DC-2A
30
FQC WOG-S
+ FQC-WG
30
Qty/Case
80
100
LTP088
LENSES
2MTARS_
2MTARS100F6
2ARS_
2PPS00
HOUSING MOUNTING BRACKETS
BRTKS22PK
BRTK 1
MISCELLANEOUS PARTS
TRAYLATSS
Ordering Notes:
1. Apply silicone sealant to internal threads for wet location use
2. Requires housing with 1-1/4” end opening(s); c
Contact Sales
3. Requires NUT1001 nut.
4.
5.
6.
Two required
3000K, 3500K and 5000K CCT available by special order. See Customer Service
Frosted High Diffusion 85% transmission will be
available 11/01. Please inquire about samples.
TRAYLAT
LANYARD
OPTIONAL ACCESSORIES
Quantities are one each unless otherwise indicated.
TAMPER BIT 8
A.L.P.
6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alplighting.com
TAMPER BIT 3
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV# SENTRY2LED012116
Sentry Series
2’ LED Parking Garage Luminaire
LED FIXTURE KIT ORDERING
Series
Module Configuration
F220 = 2’ Sentry
Housing
2RLED = 2 LED Board Rows
-
Gear Tray
Driver
LED Module
Lens
1 = Flat Gear
Tray
1 = LGIT 37W
520 mA driver
B = LGIT 50
LED 4000K
module
1
3
4
5
6
7
=
=
=
=
=
=
2PPS00 2’ Shallow Prismatic Polycarbonate
2ARS15 2’ Shallow Crepe Acrylic, 15% DR
2ARS00 2’ Shallow Crepe Acrylic, 50% DR
2MTARSMI 2’ Tapered Acrylic, 15% DR
2MTARSHI2’ Tapered Acrylic, 50% DR
2MTARSLED 2’ Tapered Acrylic Frosted
DLC Qualified Kit Configurations -Application Category #9
• F2202RLED-11B3
A.L.P.
6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331
www.alplighting.com
© 2015 A.L.P. Lighting Components, Inc.
Sheet/REV# SENTRY2LED012116