STEEL SHAPES
DIRECT / INDIRECT
SERIES
S334-ADJ
ROTATABLE
Options:
Mounting Options:
W - Wall mounting
Lamp Options:
BX - 50W biax
T5 - 5/8" diameter lamp
T5HO - 5/8" diameter lamp (High output)
T8 - 1" diameter lamp
Downlight Options:
3 3/8"
PERF - Integral perforated areas
backed with opal acrylic diffuser
Reflector Options:
SS - Semi-specular aluminum
Color Options:
WHT - White (Standard)
CA - Custom colors
Electrical Options:
UNV - Universal voltage 120/277
347V - 347 volt operation
2CIR - 2 circuit wiring
DIM - Dimming ballast (Consult factory)
EM - Emergency ballast
GLR - In line fusing
4"
4"
3/4"
3/4"
4 3/8"
4 3/8"
3 3/8"
PMC’s S334-ADJ is housed in a die formed heavy gauge steel casing for structural
stability. Its adjustable diffuser is made of 20 guage perforated steel with solid ends. It
can be positioned to allow light output to meet standard requirements - and is locked in
position by concealed hardware. The reflector behind the lamp is made of specular
aluminum. The fixture is be to be wall mounted with hardware by others. All PMC fixtures have epoxy powder coated housings, with precision-formed, high reflectance
(minimum reflectance factor 90%) emamel reflectors for optimum optical efficiency.
Fixtures are UL listed for damp location, and have standard electronic ballasts.
Each fixture is lamp-tested at the factory before shipment.
ORDERING INFORMATION
S334-ADJ - DI - W - 1 / T8- 4 - SS - PERF - WHT - UNV
SERIES
NUMBER
LIGHT
OUTPUT
DI
W
1
2
BX
T5
T5HO
T8
2
3
4
SS
PERF
UNV
347V
2CIR
DIM
EM
GLR
MOUNTING
NUMBER
OF LAMPS
LAMP
TYPE
LENGTH
WHT
Standard
CA
Custom
Color
REFLECTOR
DFFFUSER
COLOR
ELECTRICAL
OPTIONS
STS-18
SERIES S334-ADJ
4"
Back View With Wall Mounting Locations
8.000"
[203mm]
8.000"
[203mm]
3/4"
4 3/8"
3 3/8"
6.000"
[152mm]
6.000"
[152mm]
48.000"
[1219mm]
PHOTOMETRY BELOW
IS THIS POSITION
PHOTOMETRY
No: S334-ADJ-DI-W-1/OCT-4-WHT-120-EB
1 Lamps•2850 Lumens•Open
Coefficients of Utilization
RCR
1
2
3
4
5
6
7
8
9
10
70
80%
50
30
70
70%
50
30
50
50%
30
10
.58
.53
.48
.45
.39
.36
.34
.27
.25
.23
.58
.51
.44
.38
.36
.30
.27
.22
.19
.18
.58
.49
.43
.37
.35
.29
.26
.21
.20
.17
.52
.47
.44
.39
.36
.33
.30
.28
.27
.25
.52
.45
.41
.34
.31
.27
.24
.22
.21
.19
.52
.42
.39
.31
.28
.24
.21
.19
.18
.16
.41
.36
.32
.29
.26
.22
.19
.17
.16
.14
.41
.35
.31
.28
.24
.20
.18
.16
.14
.12
.41
.33
.29
.26
.22
.19
.17
.15
.13
.10
CANDELLA DISTRIBUTION
SPECIFICATIONS
CONSTRUCTION: Fixture Exterior
Chassis is die-formed, and welded
of 20 gauge, cold rolled steel,
perforated roatatable face and
backed with white opal. Internal
construction of 20 gauge, die
formed CRS.
ELECTRICAL: All fixtures are UL
listed, and are shipped fully wired,
individually tested, with Electronic
Ballasts shipped as standard
equipment
MOUNTING: Fixture is mounted to
to wall using keyhole slots.
FINISH: A range of custom colors
are available to meet Architect
specifications. Please consult the
factory.
FINISH: Standard fixtures are
polyester powder-coated white
Reflectors are finished with high
gloss white enamel (Minimum
Reflectance Factor 90%).
All dimensions are subject to change, Consult the
factory before making structural alterations.
OPTIONS:
ELECTRICAL: 277 Volt Ballast
(277). Dimming Ballast (DIM).
Emergency Ballast (EM) Note:
unless specified, PMC will select
ballasts to meet requirements. In
Line Fusing (GLR).
2 Circuit Wiring (2CIR).
100 Gilbane Street / Warwick, RI 02886 • 401.738.7266
FAX.401.738.0618 • www.pmclighting.com
STS-18