Datenblatt SAK Series SAKT 1/35/QT1 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com In order to do justice to the different requirements placed on our products, it is necessary to use various insulating materials tailored to the particular application. None of the insulating materials used by Weidmüller contain any hazardous substances. Above all, we ensure that all our materials are free from cadmium. Furthermore, they contain no colour pigments based on heavy metals and do not lead to the formation of dioxin/furan. General ordering data Type Order No. Version GTIN (EAN) Qty. SAKT 1/35/QT1 0105720000 SAK Series, Test-disconnect terminal, Rated crosssection: 6 mm², Screw connection, Medium Yellow, Direct mounting 4008190116439 50 pc(s). Erstellungs-Datum December 12, 2013 10:33:40 AM CET Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 1 Datenblatt SAK Series SAKT 1/35/QT1 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technische Daten Dimensions and weights Length Height Net weight 65 mm 52.5 mm 27.6 g Width Height of lowest version -60 °C Storage temperature Continuous operating temp., max. Installation advice Open sides Version Direct mounting right Screw connection, Special terminal longitudinal isolator, for screwable cross-connection, One end without connector Voltage size C (CSA) Wire cross section max. (CSA) 300 V 8 AWG Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. 8 mm 52.5 mm Temperatures Operating temperature Continuous operating temp., min. 130 °C Additional technical data Explosion-tested version Number of similar terminals Type of mounting No 1 Snap-on CSA ratings data Certificate No. (CSA) Current size C (CSA) Wire cross section min. (CSA) 12400-198 25 A 26 AWG Clampable wires (additional connection) Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min. 0.5 mm² 6 mm² Clampable wires (rated connection) Type of connection Screw connection Blade size 4.0 x 0.8 mm Number of connections 2 Clamping range, rated connection, max. 10 mm² Torque level with DMS electric screwdriver 3 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross section, finely stranded, max. 6 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Wire connection cross section AWG, min. AWG 26 Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Gauge to IEC 60947-1 12 mm on side 0.13 mm² M 3.5 Integral test socket Torque level with DMS electric screwdriver No A5 Wire connection cross section, solid core max. rated connection 10 mm² Wire connection cross section, stranded, rated connection, max. 10 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 6 mm² Wire connection cross section AWG, max. AWG 8 Disconnect terminals Cross-disconnect Slitting sliding Miscellaneous 3 Erstellungs-Datum December 12, 2013 10:33:40 AM CET Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2 Datenblatt SAK Series SAKT 1/35/QT1 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technische Daten Rated data Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity Rated voltage Rated current Standards Voltage size C (UR) 300 V Conductor size Factory wiring max. (UR) 8 AWG Conductor size Field wiring max. (UR) 8 AWG KrG V-0, 5VA Colour Medium Yellow SAK Series on side 2 No Yes Type of connection Number of levels No. of clamping points per level Mounting rail Screw connection 1 2 TS 35 EC000902 27-14-11-26 27-14-11-26 UNSPSC eClass 6.2 30-21-18-11 27-14-11-26 6 mm² 6 kV 57 A 3 400 V 41 A IEC 60947-7-1 UL ratings data Certificate No. (UR) E60693 Current size C (UR) 25 A Conductor size Factory wiring min. (UR) 26 AWG Material data Material UL 94 flammability rating System specifications Product family Connection direction Number of connections Levels cross-connected internally End cover plate required Classifications ETIM 3.0 eClass 5.1 eClass 7.1 Product information Descriptive text technical data Descriptive text accessories 10 mm² stranded and AWG 8/7 connections are to be fixed with 1.6 Nm tightening torque. To safe the test sockets use the SDIZ-blade (see chapter Tools) or bits with pilots! Approvals Approvals ROHS Conform Erstellungs-Datum December 12, 2013 10:33:40 AM CET Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 3