Data sheet
W-Series
WSI 6/LD 60-150V DC/AC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
The fuse terminals of the Weidmüller W Series are
available in two different forms:
• Fuse terminal with pivoting retaining lever
• Fuse terminal with plug-in SIHA fuse holder
General ordering data
Type
Order No.
Version
GTIN (EAN)
Qty.
WSI 6/LD 60-150V DC/AC
1012300000
W-Series, Fuse terminal, Rated cross-section: 6
mm², Screw connection
4008190012908
50 pc(s).
Creation date December 10, 2015 12:09:54 PM CET
Catalogue status 06.11.2015 / We reserve the right to make technical changes.
1
Data sheet
W-Series
WSI 6/LD 60-150V DC/AC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions and weights
Width
Height
Depth
Depth including DIN rail
Net weight
7.9 mm
60 mm
71.5 mm
72 mm
19.37 g
Width (inches)
Height (inches)
Depth (inches)
Weight
0.311 inch
2.362 inch
2.815 inch
21.5 g
-50 °C
Continuous operating temp., max.
120 °C
Wemid
V-0
Colour
Dark Beige
Screw connection,
Fuse isolator, with LED,
for screwable crossconnection, One end
without connector
1
2
No
TS 35
No
End cover plate required
Number of levels
Number of potentials per tier
PE connection
N-function
PEN function
Yes
1
1
No
No
No
No
right
Number of similar terminals
Type of mounting
1
Snap-on
200039-1057876
20 AWG
Wire cross section max. (CSA)
8 AWG
Temperatures
Continuous operating temp., min.
Material data
Material
UL 94 flammability rating
System specifications
Version
Number of potentials
No. of clamping points per level
Levels cross-connected internally
Mounting rail
PE function
Additional technical data
Explosion-tested version
Open sides
CSA rating data
Certificate No. (CSA)
Wire cross section min. (CSA)
Conductors for clamping (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max.
6 mm²
Creation date December 10, 2015 12:09:54 PM CET
Catalogue status 06.11.2015 / We reserve the right to make technical changes.
2
Data sheet
W-Series
WSI 6/LD 60-150V DC/AC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Conductors for clamping (rated connection)
Blade size
0.8 x 4.0 mm
Clamping range, rated connection, min. 0.5 mm²
Connection direction
Gauge to IEC 60947-1
Stripping length
Tightening torque, min.
Type of connection
Wire connection cross section AWG,
min.
on side
A5
12 mm
0.8 Nm
Screw connection
AWG 20
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min.
0.5 mm²
Wire connection cross section, solid
core max. rated connection
10 mm²
Wire connection cross section, stranded,
rated connection, max.
10 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max.
6 mm²
Clamping range, rated connection, max.
Clamping screw
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min.
Number of connections
Tightening torque, max.
Torque level with DMS electric
screwdriver
Wire connection cross section AWG,
max.
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max.
Wire connection cross section, finely
stranded, max.
10 mm²
M 3.5
0.5 mm²
2
1.6 Nm
3
AWG 8
6 mm²
10 mm²
Wire connection cross section, solid
core, min. rated connection
0.5 mm²
Wire connection cross section, stranded,
rated connection, min.
1.5 mm²
Wire connection cross-section, finely
stranded, min.
0.5 mm²
Dimensions
TS 35 offset
32 mm
150 V
AC/DC
Operating voltage for display, min.
60 V
G-Si. 5 x 20
Pivoting
Display
Operating voltage, max.
Power loss, 1-pole ; 2-pole ; 3-pole
red LED
150 V
AC/DC
No
6 mm²
6.3 A
Rated current
Standards
Rated impulse withstand voltage
Display element
Operating voltage for display, max.
Type of voltage for indicator
Fuse terminals
Cartridge fuse
Fuse holder (cartridge holder)
Permitted power loss for fuse with
semiconductor protection
Type of voltage for indicator
PE rating data
PEN function
Rating data
Rated cross-section
Current at maximum wires
Volume resistance according to IEC
60947-7-x
Pollution severity
0.78 mΩ
3
6.3 A
IEC 60947-7-3
6 kV
Creation date December 10, 2015 12:09:54 PM CET
Catalogue status 06.11.2015 / We reserve the right to make technical changes.
3
Data sheet
W-Series
WSI 6/LD 60-150V DC/AC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring min. (UR) 22 AWG
Conductor size Field wiring min. (UR)
22 AWG
Conductor size Factory wiring max. (UR) 8 AWG
Conductor size Field wiring max. (UR) 8 AWG
ETIM 4.0
ETIM 6.0
eClass 5.1
eClass 7.1
eClass 9.0
Classifications
ETIM 3.0
ETIM 5.0
UNSPSC
eClass 6.2
eClass 8.1
EC000899
EC000899
30-21-18-11
27-14-11-16
27-14-11-16
EC000899
EC000899
27-14-11-16
27-14-11-16
27-14-11-16
Product information
Descriptive text ordering data
Descriptive text accessories
Max. power loss (1.6 W) at the cartridge fuse limits the rated current.
Markers only fit on one side. Cross-connections, see section "W series accessories".
Approvals
Approvals
ROHS
Conform
Creation date December 10, 2015 12:09:54 PM CET
Catalogue status 06.11.2015 / We reserve the right to make technical changes.
4
Data sheet
W-Series
WSI 6/LD 60-150V DC/AC
Drawings
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Creation date December 10, 2015 12:09:54 PM CET
Catalogue status 06.11.2015 / We reserve the right to make technical changes.
5