Data sheet... Multipin terminal strip KS 4 O.D4 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Multi-pole terminal strips have been part of the Weidmüller portfolio for many years. The terminal rails can be screwed directly to the housing. A retightening of the clamping screw when setting the wire is not needed with these terminals. The terminal strips are available in the materials KRG and PA and with different connection systems. General ordering data Order No. Type Version GTIN (EAN) Qty. 0140320000 KS 4 O.D4 Multipin terminal strip, Single- and multi-pole terminal strip, Rated cross-section: 2.5 mm², Screw connection, Direct mounting 4008190044336 50 pc(s). Creation date September 11, 2012 1:04:34 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... Multipin terminal strip KS 4 O.D4 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions Length Height Weight 66 mm 17.5 mm 33.5 g Width Height of lowest version Net weight 25 mm 20 mm 34.9 g -60 °C Storage temperature Continuous operating temp., max. 130 °C No Direct mounting Installation advice Version Direct mounting For the mounting rails 12400-193 300 V 25 A 10 A 24 AWG Voltage size B (CSA) Voltage size D (CSA) Current size C (CSA) Wire cross section max. (CSA) 300 V 300 V 25 A 12 AWG Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 8 mm on side 0.2 mm² M3 0.7 Nm Rated voltage Rated current Standards 500 V 24 A IEC 60947-7-1 Temperatures Operating temperature Continuous operating temp., min. Additional technical data Explosion-tested version Type of mounting CSA ratings data Certificate No. (CSA) Voltage size C (CSA) Current size B (CSA) Current size D (CSA) Wire cross section min. (CSA) Clampable wires (rated connection) Type of connection Screw connection Blade size 4.0 x 0.8 mm Number of connections 8 Clamping range, rated connection, max. 4 mm² Tightening torque, min. 0.5 Nm Torque level with DMS electric screwdriver 2 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross section, finely stranded, max. 2.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 0.5 mm² Wire connection cross section AWG, min. AWG 24 A2 Wire connection cross section, solid core max. rated connection 4 mm² Wire connection cross section, stranded, rated connection, max. 2.5 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 1.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 1.5 mm² Wire connection cross section AWG, max. AWG 12 Rated data Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity 2.5 mm² 6 kV 24 A 3 Creation date September 11, 2012 1:04:34 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... Multipin terminal strip KS 4 O.D4 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data UL ratings data Certificate No. (UR) E60693VOL1SEC6 Current size C (UR) 20 A Conductor size Factory wiring min. (UR) 24 AWG Voltage size C (UR) 300 V Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG KrG 5VA Colour Medium yellow Multipin terminal strip on side No Type of connection Number of connections Screw connection 8 EC001284 30-21-18-11 27-14-11-06 27-14-11-06 ETIM 3.0 eClass 4.1 eClass 6.0 EC001284 27-14-11-06 27-14-11-06 Material data Material UL 94 flammability rating System specifications Product family Connection direction End cover plate required Classifications ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0 Approvals Approvals Creation date September 11, 2012 1:04:34 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3