Data sheet SAK Series SAK 70/35 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The Weidmüller SAK feed-through terminals satisfy the requirements of IEC 60947-1 and are available with rated cross-sections from 0.08 mm² to 240 mm². General ordering data Type Order No. GTIN (EAN) Qty. SAK 70/35 0139160000 4008190088552 10 pc(s). Creation date June 9, 2014 7:18:31 PM CEST Catalogue status 28.04.2014 / We reserve the right to make technical changes. 1 Data sheet SAK Series SAK 70/35 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width Height of lowest version Net weight 22 mm 87 mm 157.1 g Height Depth 75 mm 87 mm -50 °C Continuous operating temp., max. 100 °C No right Screw connection, for screwable crossconnection, One end without connector Number of similar terminals Type of mounting 1 Clamped 12400-136 150 A 4 AWG Voltage size C (CSA) Wire cross section max. (CSA) 600 V 00 AWG Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. Temperatures Continuous operating temp., min. Additional technical data Explosion-tested version Open sides Version CSA ratings data Certificate No. (CSA) Current size C (CSA) Wire cross section min. (CSA) Clampable wires (additional connection) Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min. 16 mm² 35 mm² Clampable wires (rated connection) Type of connection Blade size Number of connections Clamping range, rated connection, max. Tightening torque, min. Gauge to IEC 60947-1 Screw connection S6 (DIN 6911) 2 70 mm² 6 Nm B11 Wire connection cross section, solid core max. rated connection 16 mm² Wire connection cross section, stranded, rated connection, max. 70 mm² Wire connection cross-section, finely stranded, min. 16 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 35 mm² Wire connection cross section AWG, max. AWG 2/0 Stripping length 24 mm Connection direction on side Clamping range, rated connection, min. 16 mm² Clamping screw M8 Tightening torque, max. 12 Nm Wire connection cross section, solid core, min. rated connection 16 mm² Wire connection cross section, stranded, rated connection, min. 16 mm² Wire connection cross section, finely stranded, max. 70 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 16 mm² Wire connection cross section AWG, min. AWG 4 Dimensions TS 35 offset 19.5 mm Creation date June 9, 2014 7:18:31 PM CEST Catalogue status 28.04.2014 / We reserve the right to make technical changes. 2 Data sheet SAK Series SAK 70/35 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rated data Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity 70 mm² 8 kV 192 A 3 Rated voltage Rated current Standards 1,000 V 192 A IEC 60947-7-1 3: 9 x 0.8 6: 13 x 0.5 Band 1, No. of layers, max. 6: 9 x 0.8 Voltage size C (UR) 600 V Conductor size Factory wiring max. (UR) 00 AWG Conductor size Field wiring max. (UR) 00 AWG PA 66 Beige Material UL 94 flammability rating PA 66 V-2 SAK Series on side 2 No Yes Type of connection Number of levels No. of clamping points per level Mounting rail Screw connection 1 2 TS 35 EC000897 27-14-11-20 27-14-11-20 UNSPSC eClass 6.2 30-21-18-11 27-14-11-20 Strap connection Band 1, No. of layers, min. Band 2, No. of layers, min. UL ratings data Certificate No. (UR) E60693 Current size C (UR) 150 A Conductor size Factory wiring min. (UR) 4 AWG Material data Insulating material Colour System specifications Product family Connection direction Number of connections Levels cross-connected internally End cover plate required Classifications ETIM 3.0 eClass 5.1 eClass 7.1 Product information Descriptive text technical data Tightening torque for 70 mm² stranded = 12 Nm. Approvals Approvals ROHS Conform Creation date June 9, 2014 7:18:31 PM CEST Catalogue status 28.04.2014 / We reserve the right to make technical changes. 3