GE
PW
RAL 7035 IP55 IP43 IK08 17-21 KG
Multiple circular beam optics are available, from very narrow to very wide, thus permitting optimized illumination designs with minimal light dispersion.
Luminaire & ballast are supplied and tested by GE, ensuring the best possible product quality. GE lamps can be ordered separately.
Application: sports lighting and extensive areas such as stadiums, recreational areas, airport aprons, racecourses, open-air car parks, etc. High-roofed large premises such as sports pavilions. Architectural lighting of buildings and monuments.
Housing: compact design, with ballast and lamp holder fixture in one single diecast aluminium housing, electrostatically sprayed with a RAL 7035 grey polyester powder paint finish, following anti-corrosion priming, oven cured at 180ºC.
Ballast support board: 230V integrated ballast in high power factor. IP54. Optional remote ballast fitting.
Control gear: is accessible from the front of the floodlight by removing the housing’s aluminium cover.
Gear tray: PW allows HPS tubular lamps up to 1000W and
Metal Halide up to 1650W.
Insulation: Class I.
Optical assembly: degree of protection IP55, comprising:
Filtered optical system, comprising a circular aluminium reflector, with five different designs for distinct beam cut-offs.
Glass: flat tempered glass lens, attached to the reflector a hinged metallic rim with stainless steel latches, for tool-less access.
Gasket: silicone gasket between glass lens and reflector and between the reflector and the lamp holder fixture.
Tool-less access to the lamp, from the front of the floodlight.
Aiming via folding sight, built into the ballast compartment.
Mounting by way of heavy gauge steel bracket with aiming degree indicator and locking plate system for securing the tilt angle.
• The floodlight can be supplied with a longer bracket for pendant mounting.
• The floodlight may incorporate a fuse. FUS option.
• The floodlight can incorporate an outer housing for the reflector, manufactured in heavy-duty spun aluminium.
HD option.

TOP VISOR FOR STANDARD
Ø 526 OR HD WITH DOOR.
305
B size 1 size 2
A
(mm)
584
526
B
(mm)
894
870
R 30
6
461
323
PW/2x2/MH1650
FIXED LAMPHOLDER POSITION
8640
7680
6720
5760
4800
3840
2880
VERT.
HORIZ.
1920
960
0
-18 -14 -10 -6 -2 2
DEGREES
6 10 14
Dimensions [mm]
Weight [kg]
Mounting
Ballast
Reflector size 1: 894x584x461 (lenght x widht x height) size 2: 870x526x461 (lenght x widht x height)
17.00-21.00
Trunnion mounting
HPS and MH up to 400W, 230V, 50Hz
Wide or Narrow
Protection Degree
Class
Windage load [m 2 ]
IP55 for the optical assembly
IP43 for the gear compartment
Class I size 1: 0,3 size 2: 0,25
Operating Temperature [°C] 25ºC. Contact us for higher temperatures
Regulations CEI 34.21/EN 60598-1, IEC 60598
18
and General Electric are both registered trademarks of the General Electric Company
PW Housing
Description
PW HPS 1000W HOUSING
PW MH1000W HOUSING
PW MH1650W HOUSING
PW Optics
Description
PW-20 B OPTICAL ASSEMBLY
PW-20 C OPTICAL ASSEMBLY
PW-20 D OPTICAL ASSEMBLY
PW-20 E OPTICAL ASSEMBLY
PW-22 A OPTICAL ASSEMBLY
PW-22 A2 OPTICAL ASSEMBLY
Lamp
Product code
LU1000/110/T/40
MVR1000/U/40
MS1650/HOR/SPORT 60
519578
519579
519580
Luminaire supplied without lamp
Product code
519583
519584
519585
519586
519582
519581
Luminaire supplied without lamp
GE Lighting is constantly developing and improving its products. For this reason, all product descriptions in this brochure are intended as a general guide, and we may change specifications time to time in the interest of product development, without prior notification or public announcement. All descriptions in this publication present only general particulars of the goods to which they refer and shall not form part of any contract. Data in this guide has been obtained in controlled experimental conditions. However, GE Lighting cannot accept any liability arising from the reliance on such data to the extent permitted by law. PW Data Sheet – April 2011