PROJECT INFORMATION
STRATALUME CONNECTS™
Job Name
AUC SERIES – 24 HOUR SHIP PROGRAM
Fixture Type
Catalog Number
PRODUCT FEATURES:
Approved by
»»Available in 2 lengths, T8 lamping to fit
any application
»»Extruded marine grade aluminum
housing with high-impact polycarbonate
end caps
»»Solid front lens
»»External mounting feet allow for easy
installation
SPECIFICATIONS
HOUSING: Extruded marine-grade aluminum. Nominal thickness: 0.060".
LENS: UV-stabilized, high-impact resistant, extruded frost 100% DR acrylic. Smooth exterior, linear prism interior. Snap-in tool-less entry design.
END CAPS/COVERS: UV-stabilized, high-impact resistant, injection-molded white polycarbonate. Light leak-preventing interlocking design.
SOCKETS: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.
ELECTRICAL: Instant start electronic ballast <10% THD. High power factor; UL Listed, Class P; Class A audible noise rating. 3500K lamps pre-installed at factory. Male and female grounded
connectors provided at ends of series-mount fixtures.
INSTALLATION: External mounting feet allow installation without accessing internal compartments. Four-point mounting required for individual fixtures and initial fixture in series-mount run.
Two-point mounting required for subsequent series-mount fixtures. Direct wire in rear of fixture uses push-in connectors behind quick-access cover (7/8" KO). Direct wire into sides of fixture uses
included adapter plate. Maximum current of series-runs 6 amps per circuit.
LISTINGS: UL and CUL listed for Damp Location.
24
Hour
ORDERING INFORMATION (Ex: XAUCSD-S-MW-26-IS-DV)
Model
XAUCSD
Installation Type
Finish
S
Length/Lamps
Ballast Type
MW
Installation Type
S
Series Mount
Voltage
IS
DV
Finish
MW Matte White
Ballast Type
IS
Instant Start Electronic <10% THD (T8)
Length/Lamps
26 26.125" one 17 Watt (F17T8)
50 50.125" one 32 Watt (F32T8)
Voltage
DV 120-277 Volts
DIMENSIONAL DATA
CROSS SECTION/DETAILS
TOP MOUNTING VIEW
2' unit: 26.12"
5.66"
4' unit: 50.12"
1.70"
(4) 0.188" Mounting Holes
Length Dimension – XAUC Series
MODEL
LAMP X
Voltage Max. Current
(in) (mm)
120V
277V
26
(1) F17T8
26.12 663
0.20
0.08
50
(1) F32T8
50.12 1273
0.29
0.13
NOTE: Subtract 0.54" for each end cover removed to get overall length in series mount applications. When ordering the power or
interconnect cordset, allow at least 2" clearance on the side of the fixture. To calculate maximum allowable fixtures in a series run,
divide 6 amps maximum current by the maximum current of each fixture.
www.kenall.com
P: 800-4-Kenall
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.
XAUCSD-QS_24HR-021014