Emergency Lighting Transfer Device Central Power Systems Evenlite’s emergency lighting transfer device allows the user to provide emergency backup power to switched fixtures. Backup power from a Pure Wave or Lite-Minder inverter can be routed thru the emergency transfer device to the fixtures from both the utility supply and the backup power to provide the ability to switch fixtures off for energy saving when not in use, yet have reliable backup power available during power outages. The emergency lighting transfer device is available for mounting in a j-box in the ceiling (EPC-PM), or for mounting in the fixture ballast channel (EPC-A). In-Fixture Installation EPC-A Recommended Box Size 4-11/16” 5” L x 1.15” W x 1.15” D TEST SWITCH GREEN & RED LED’s Body Size: 1-1/2" x 3-1/2" x 3" BLUE 6 EMERGENCY SWITCH LEG YELLOW INDICATING LED 5 Emergency Load WHITE EMERGENCY NEUTRAL 4 BLUE BLACK 1 TEST SWITCH EMERGENCY HOT INDICATING LED MODEL EPC-PM WIRING DIAGRAM RED 2 ∗ 17 Amp Regular Lights WHITE 3 It is recommended to number field wiring exactly the same with numbers provided. 3161 State Road, Bensalem, PA 19020 USA TEL: (800) 872 0879 • FAX:(215) 244 4208 • www.evenlite.com REGULAR LINE HOT ROOM SWITCH LEGSWITCH REGULAR LINE NEUTRAL ∗ OPTIONAL OCCUPANCY SENSOR CONTACT Project name: Approved By: Catalog No: Type No: Emergency Lighting Transfer Device FEATURES • • • • • • • • The EPC-PM easily installs in a 4-11/16” j-box The EPC-PM is provided with red and green LED indicators, green indicates utility power is present and red indicates emergency power is present Failsafe operation, with built in surge protection Energy savings realized by switching fixtures off when not in use Emergency backup power provided on failure of normal utility power regardless of wall switch position A momentary test switch allows the user to test the EPC-PM as required Compatible with Pure Wave and Lite-Minder Sine Wave Inverter Systems Compatible with dimming systems and occupancy sensors • • • • • • • • MULTIPLE EPC ON A 20 AMP BREAKER The EPC-A is UL listed for field installation in the fixture ballast channel A green LED is provided to indicate that utility power is present Allows the room fixture to be switched off when not in use for energy savings Dedicated emergency luminaires stay on for an additional 2.5 seconds after being turned off to indicate that the emergency power source is available Both devices are completely maintenance free Operating temperature range for both devices is 32° to 140° F (0-60°C) Both devices are UL 924 listed Three year limited warranty Model EPC-A Fixture Mount Installation Instructions ORDERING GUIDE It is recommended to number eld wiring EPC Model Mounting EPC Emergency Power Control PM A* Plenum Mount Fixture Mount Input/Output Voltage V1 120/120 VAC V2 277/277 VAC * EPC-A is 120/277 VAC field selectable Example: EPC-PM 3161 State Road • Bensalem, PA 19020 USA Tel: (800) 872-0879 • Fax: (215) 244-4208 www.evenlite.com EPC 05/13