Q-Specials 2015

advertisement
10 SPY COURT
MARKHAM, ON L3R 5H6
PZ 10 HEX Ferrule Crimper
Special
Price of
$200.00
The new PZ 10 HEX is able to crimp
wire end ferrules with or without
plastic collar from 0.14 – 10 mm²
(26 to 7 AWG). The hexagonal crimp form
provides a nearly round crimp with the
lowest maximum diameter and is optimal
in spatially limited areas.
•For wire end ferrules with or without
plastic collar according to DIN 46228
Part 1 and Part 4
•Ratchet for precise crimping
•Release option in the event of incorrect operation
•Ergonomic design
•Low hand forces required
Catalog #
Description
1445070000
PZ 10 HEX
Regular Price
Special Price
$300.00 ea.
$200.00 ea.
QUOTATION #Q2-2015
This number must appear on purchase order to receive
special prices.
Valid from April 1st to June 30th, 2015
Q-S p e c i a l s 2 015
2nd Quarter
Special
Price from
$ 4.40
Weidmuller Canada Infoline : 1-800-268-4080
Weidmuller Canada Fax :
1-877-300-5635
support@weidmuller.ca
ISO 9001:2008 Registered
For an electronic copy of this Q-Special :
http://www.weidmuller.ca/q-specials_ca
CAT6 Ethernet Patch Cables
Pre-assembled CAT6 cables with straight ends
•According to Cat.6A / Class EA (ISO/IEC 11801 2010)
•Can be used for PoE applications
•Wire markers included
•Standard stocked colour green
•Other colours available upon request (grey, blue, black, red, magenta,
yellow)
•Standard lengths in meters
- 3.0m (0030)
- 0.5m (0005)
- 5.0m (0050)
- 1.0m (0010)
- 10.0m (0100)
- 2.0m (0020)
Catalog #
Description
1251590005
1251590010
1251590020
1251590030
1251590050
1251590100
IE-C6FP8LG0005M40M40-G
IE-C6FP8LG0010M40M40-G
IE-C6FP8LG0020M40M40-G
IE-C6FP8LG0030M40M40-G
IE-C6FP8LG0050M40M40-G
IE-C6FP8LG0100M40M40-G
Regular Price
Special Price
$5.30 ea.
$6.40 ea.
$8.70 ea.
$11.00 ea.
$14.80 ea.
$25.60 ea.
$4.40 ea.
$5.20 ea.
$7.40 ea.
$9.40 ea.
$13.10 ea.
$22.90 ea.
Q-S p e c i a l s
Special
Price from
$55.00
ESX10-T Circuit Protectors
ESX10-TA 24Vdc Electronic Circuit Protectors designed to ensure selective disconnection of 24Vdc
load systems.
•Selected in fixed values from 0.5 A...12 A
•Manual ON/OFF button (S1)
•Width per unit only 12.5mm, TS35 DIN-rail mounting only
•UL2367, File E306740, Solid State Overcurrent Protectors
•Class 1 Div 2 and Zone 2 approved, ATEX Zone 2 approved
•UL508/CSA No.14, CE marked
•Other versions available (Auxiliary contacts, Control or Reset input); Consult factory
Catalog #
Special
Price from
$30.00
6720005305
6720005301
6720005302
6720005303
6720005304
6720005306
6720005308
6720005310
6720005312
Description
ESX10-TA-100-DC24V-0.5A-E
ESX10-TA-100-DC24V-1A-E
ESX10-TA-100-DC24V-2A-E
ESX10-TA-100-DC24V-3A-E
ESX10-TA-100-DC24V-4A-E
ESX10-TA-100-DC24V-6A-E
ESX10-TA-100-DC24V-8A-E
ESX10-TA-100-DC24V-10A-E
ESX10-TA-100-DC24V-12A-E
Regular Price
$84.00 ea.
$84.00 ea.
$84.00 ea.
$84.00 ea.
$84.00 ea.
$84.00 ea.
$84.00 ea.
$84.00 ea.
$84.00 ea.
Special Price
$55.00 ea.
$55.00 ea.
$55.00 ea.
$55.00 ea.
$55.00 ea.
$55.00 ea.
$60.00 ea.
$60.00 ea.
$60.00 ea.
Surge Protection Devices
The SPD II range of surge protectors are used for transient surge protection of single and multi-phase power
circuits at the main electrical panel. The SPD design is based on high-energy varistors (MOVs) equipped with
thermal disconnects and integral failure indicators. A remote signaling contact for disconnection indication is
standard on each unit. Typical applications include low voltage distribution or protection of industrial control
systems, equipment assemblies and devices. Units are rated as per UL1449 3rd Edition for USA and Canada.
•SPD II 120V/40kA single channel unit; parallel multiple units for multi-phase circuits at 120/208Vac
•SPD II 120V/G/40kA dual channel unit for level II transients in single phase 120Vac (L-N) circuits
•SPD III 120V/40kA dual channel unit for level III transients in single phase 120Vac (L-N) circuits
Catalog #
Special
Price from
$0.25
6720005410
6720005415
6720005416
Description
SPD II 120V/40kA
SPD II 120V/G/40kA
SPD III 120V/40kA
Regular Price
$51.50 ea.
$77.30 ea.
$70.10 ea.
Special Price
$30.00 ea.
$47.50 ea.
$47.50 ea.
WAD Markers
Now in MultiCard format!!! The WAD markers are the preferred choice for marking group functions.
•Mounting on terminals of the W-series and end brackets WEW 35/2 and ZEW 35/2
•Optimised: large labelling surfaces give you the best overview
•Top-quality and resistant printing with PrintJet ADVANCED printer
•WAD 5 for 5mm wide devices or more, blank markers available in white or yellow
•WAD 8 for 8mm wide devices or more, blank markers available in white or yellow
•Black/Yellow versions pre-printed with the lightning bolt symbol indicating live circuits
•Sold per card of 48 markers - Priced per marker
Catalog #
Special
Price from
$14.00
1120450000
1112910000
1112920000
1120470000
1112940000
1112950000
WAD 5 MC B GE/SW (Black/Yellow)
WAD 5 MC NE WS (Neutral White)
WAD 5 MC NE GE (Neutral Yellow)
WAD 8 MC B GE/SW (Black/Yellow)
WAD 8 MC NE WS (Neutral White)
WAD 8 MC NE GE (Neutral Yellow)
Regular Price
$0.59 ea.
$0.39 ea.
$0.39 ea.
$0.62 ea.
$0.47 ea.
$0.47 ea.
Special Price
$0.35 ea.
$0.25 ea.
$0.25 ea.
$0.40 ea.
$0.30 ea.
$0.30 ea.
Circuit Development Kits
Includes prototype Printed Circuit Board, TS32 or TS35 DIN-rail mounted housing, screw clamp terminals, and
marking tags – just about everything you need to prototype a circuit.
Catalog #
7940003500
7940003501
HELP US CONSERVE!!!
If you would prefer an electronic copy,
contact: marketing@weidmuller.ca
Description
Description
RS70-3 CIRCUIT DEVELOPMENT KIT
RS70-5 CIRCUIT DEVELOPMENT KIT
Regular Price
$19.60 ea.
$23.50 ea.
Special Price
$14.00 ea.
$16.50 ea.
CONDITIONS: Prices valid from April 1, 2015 to June 30, 2015. Orders must be received by Weidmuller by this date.
Orders must be sent to an authorized Weidmuller distributor. Orders must reference quotation number Q2-2015.
Please note that all prices (Regular Price and Special Price) are suggested pricing only.
VSSC and VSPC now CSA C1D2
Pluggable surge protection for the measurement and control industry
VARITECTOR SPC
New!
Protects Analog, Digital, Fieldbus and Telecom Signals
• 60+ models with pluggable, replaceable arrestors
Local and Remote Status
•A
rrestor condition status displayed locally;
optional remote display
• Uses the VSPC control unit
Space-Saving
• 4 digital or 2 analog signals in just 17.8mm
High Level of Protection
• IEC 62305: safely discharges impulse currents up to
20 kA (8/20 μs) and 2.5 kA (10/350 μs) to ground
Arrestor Health Options
•P
luggable arrestor can be tested with V-TEST
instrument in accordance with IEC62305
Model Selection
•P
luggable arrestors for 5Vdc, 12Vdc, 24Vdc,
24Vac and others
• Options with remote signalling
• Bases with or without remote signal or floating ground
Approvals
•C
E, UL497B 4th Edition, SIL2 or 3 to EN 61508:2010,
cCSAus C1D2 and C1Z2
• Other blue versions intrinsically safe to cCSAus C1D1 and C1Z1
Surge protection in a terminal block for measurement and control systems
VARITECTOR SSC
Local Monitoring Options (VSSC6)
• Arrestor and loop status can be displayed with local LED
• Disconnect levers for arrestor and loop testing
Analog, Digital, Fieldbus and Telecom Signals
•1
00+ terminal-type SPDs
•C
omplementary to VSPC range (with pluggable arrestors), for
grounded or floating I/O applications
Cost and Space-Saving Design
• Terminal with built-in surge protector
• 6.2mm width per signal loop
Quick Circuit Identification
•C
olour-coded marking simplifies voltage level identification
Model Selection
•S
urge arrestors for 12Vdc, 24Vdc current loops,
24Vac/dc, 120Vac and 240Vac digital signals,
2 wire RS-485 serial communication bus,
3 wire RTD and others
• Options with loop test disconnects
• Grouding via DIN-rail or field terminals
Approvals
•C
E, UL497B 4th Edition, SIL2 or 3 to EN 61508:2010,
cCSAus C1D2 and C1Z2
• Other blue versions intrinsically safe to cCSAus C1D1 and C1Z1
u-remote Ethernet/IP Gateway Now Available
New!
EtherNet/IP™ is a widespread, real-time capable Industrial Ethernet fieldbus system.
Based on standard Ethernet technology such as TCP and UDP, in addition to the transmission of unicast
messages between two participants, this provides the possibility of sending I/O data via multicast cyclically
to multiple recipients.
The UR20-FBC-EIP from Weidmuller is a field bus coupler designed in accordance with IEC 61158 and is
an EtherNet/IP participant. With options for connecting up to 64 u-remote participants, it serves as the head
module for the u-remote system bus.
The coupler can be activated with a system-independent web server application via the USB service interface
or the Ethernet ports. All information such as diagnoses, status values and parameters can therefore be read
out. All connected inputs can also be simulated or outputs set. The system’s initial power supply is already
integrated in the field bus coupler. Power is supplied via two 4-pin connectors, separated into the input and
output current paths.
Since the EtherNet/IP products from Weidmuller make full use of all the latest technological possibilities, such
as diagnosis options, they actively support your application in the most important tasks – from engineering and
commissioning to fault diagnosis.
More Performance. Simplified.
Product Features:
•2
x 10A separate current paths; one for input cards,
one for output cards
• Integrated Web server via USB or Ethernet interfaces
• Integrated 2 port switch for easy network daisy chaining
• System supply of up to 64 I/O modules
• Operating temperature range of -20 to +60°C
• End plate and end brackets included
• Part number 1334920000
Other gateways available (all with Webserver tool via USB port)
PROFIBUS field bus coupler - DP-V1 with Sub-D connection
PROFINET field bus coupler - two 100 Mbit/s RJ45 ports
EtherCAT field bus coupler - two 10/100 Mbit/s RJ45 ports
Modbus-TCP field bus coupler - two 10/100 Mbit/s RJ45 ports
More gateways coming later this year: DeviceNet, CanOpen and more!!!
Part Number
1334870000
1334880000
1334910000
1334930000
Close to 100 different Input and Output
cards now available including new Safety
SIL powerfeed cards and High Density
(HD) ones with 32 connection points
using IDC technology
Check out more information on our u-remote system at:
http://www.weidmuller.com/us/u-remote
• Applications
• Customer Benefits
• Product Highlights
• System Components
•D
ocuments and Product Videos
• Sample Requests and Contact
• Awards
• Configurator Software
2014 Employee and Salesman of the Year
Weidmuller is proud to introduce the 2014
Employee of the Year, Mr. Andrew Brown.
Weidmuller is equally proud to introduce our
2014 Salesman of the Year, Mr. Andrey Goreev.
Andrew has been with Weidmuller since March
2006 in the capacity of Warehouse Receiver/
Shipper, working out of our head office in
Markham, Ontario.
Andrey has been with Weidmuller since March of
2013. As the Key Account and Major Projects
Specialist for the Alberta region, Andrey’s ambitious
work ethic and outgoing nature have made him a
great asset to the Alberta sales team sucessfully
achieving the respect of customers, management
and peers.
Andrew’s tireless efforts and winning personality
made him a clear choice by managers and peers
alike. We wish him continued success in his
career at Weidmuller.
Download