~
..,
INSULATION KIT TYPES
TYPE E
TYPE F (RIN G GAS KET)
(FULL FACE GASKET)
This gasket kit provides complete protection of both
flange faces. The gasket has same outside diameter of
flanges. This feature will prevent collection of foreign
matter between the flange faces to ensure complete
cathodic isolation.
This gasket is manufactured to fit only the raised face
surface of the flanges. Outside diameter of the gasket
is designed to be slightly less than the inside diameter
of the bolt circle. It is recommended that the flanges be
wrapped to prevent foreign material from "shorting
out" the flanges.
TAG-SEAL
TYPE D
This gasket has a sealing element bonded in both faces of
the gasket and can be furnished in Type E full face Gasket
or Type F ring gasket. TAG-SEAL gives the resilience of
an a-ring and maintains constant contact with the flange
face. Gaskets are offered in any of the materials listed on
specification sheet with Nitrile, Viton, Silicone, Teflon or
expanded Teflon as the sealing element.
To fit RTJ flanges, we offer CE and LE grade phenolic and
glass filled Teflon.
TAG
T&A GASKETS
(Gaskets)
.1
SPECIFICATIONS
GASKETS
Water
Absorbtion
Plain Faced Phenolic
Neoprene Faced Phenolic
Other Materials Available On Request
------
Dielectric
Strength
Max. Operating
Temperature
1.10 %
500 vpm
225 of
0.45 %
500 vpm
175 of
G3-G7-GIO-GllJM940-C4401-Garlock
3400-Teflon-Gylon
-
SLEEVES
Polyethylepe
Mylar
PhenoliG
Intergal MinIon
Teflon
-- --- -
Water
Absorbtion
Dielectric
Strength
Max. Operating
Temperature
0.01 %
0.22 %
2.00%
0.9%
0.01 %
400 vpm
4000 vpm
500 vpm
450 vpm
600vpm
100 of
350 OF
225 of
300 of
350 of - 450 OF
Water
Absorbtion
Dielectric
Strength
Max. Operating
Temperature
1.10 %
500 vpm
225 of
WASHERS
Phenolic
Other materials available on request
-- - - ..- - .
ORDER SPECIFICATIONS
To Fit Flange Type
E
EN
ES
F
FN
FS
X
T
~
- ANSI
- MSS SP 44
Plain Faced Phenolic Full Face
Neoprene Faced Phenolic Full Face
Tag-Seal Full Fac;:e
Plain Faced Phenolic Ring
Neoprene Paced Phenolic Ring
Tag-Seal Ring
Special Order
Telflon
- API 605
_AWWA
- Other
SEALING ELEMENTS
Viton Seal
Silicone Seal
Nitrile (Buna) Seal
Teflon Seal
DW
Double Washer Set
(two steel and phenolic per boH hole)
SW
Single Washer Set
(one!)teel and phenolic perbolt hole)
Other Washers
-,Poly Sleeves
- Phenolic
- Quantity
_Pipe Siz;e
Sleeves
- Mylar Sleeves
_With Bolting
- Pressure Class
O de ExaJ11ple:A Flange Insulation Kit with a Neoprene faced. phenolic full-faced gasket, double phenolic washers,
double steel washers, .p'henolic sleeves, would be~ritt~n as: 2" 150# ANSI ENDW Phenolic
-
ADDITIONAL PRODUCTS
AND ACCESSORIES
Gaskets all types
Nut, bolt, and gasket sets
Studs and bolts
Flange protectors
Flange protection kits
Spiral wounds
RTJ rings
O-rings
Packing
GASKET MATERIALS
Garlock
Nitrile
Felt
Klinger
Hypalon
Phenolics
JM
Durabla
Butyl
Gum Rubber
FDA Nitrile
Red Rubber
Diaphragm
Cloth Inserted Rubber
Neoprene
Teflon
Graphite
Cork
Silicone
Viton
Cork and Rubber
Gylon
EPDM
Teflon Envelopes
Aflas
Plastic
Sponge Rubber
FLAGPAK
FLANGE PROTECTORS
(FLange Accessories and Gasket sets)
To protect the flange during shipping.
Hardware and gaskets
required to bolt up a
flange.
FLAG PAKS are
offered with studs or
FLANGE PROTECTION KITS
Customized for shipping protection of flanges of all
types. These kits include the flange protector, gasket, studs, nuts, and washers.
hex head bolting.
Carbon steel, stainless
steel and others are
available.
PIPE INSULATION PADS
Pipe insulation pads are made of CE phenolic, to
put between the pipe and the pie supports.
~
TAG
T&A GASKETS
EDI
.
. .
. E-Mail. Credit Cards Accepted
.
3168 South 108th East Avenue, Suite 325 Tulsa, OK 74146
918-664-7600
Fax: 918-664-7652
800-838-0007
1-800-375-0044