© Siemens AG 2008
PAC3200 Multifunction Measuring
Instruments and Expansion Modules
Catalog News LV 1 N • June 2008
SENTRON
© Siemens AG 2008
Related catalogs
Contents
Low-Voltage Controls and
Distribution
SIRIUS · SENTRON · SIVACON
Order No.:
Catalog
E86060-K1002-A101-A7-7600
Technical Information incl.
Systems Controlgear: Contactors and contactor assemblies,
solid-state switching devices Protection equipment Load
feeders, motor starters and soft starters Monitoring and control devices Detecting devices Commanding and signaling
devices Transformers Power supplies Planning and configuration with SIRIUS Power Management System SIVACON
Power, distribution boards, busway and cubicle systems
SENTRON switching and protection devices for power distribution Air circuit breakers, molded case circuit-breakers, switch
disconnectors Software for power distribution BETA lowvoltage circuit protection
Low-Voltage
Controls and Components
for Applications according to UL
Order no.:
E86060-K1816-A101-A1-7600
Industrial Communication
Industrial Communication
for Automation and Drives
Order No.:
E86060-K6710-A101-B5-7600
E86060-K6710-A121-A2-7600
SICUBE
System Cubicles and
Cubicle Air-Conditioning
·
LV 1
LV 1 T
LV 16
·
· ·
·
·
·
·
·
·
·
·
·
·
·
·
SIRIUS 3RV17 and 3RV18 circuit breaker according to UL 489
SIVACON Components for 8US Distribution Systems according
to UL 508A SENTRON 3WL5 air circuit breakers/non-automatic air circuit breakers according to UL 489/IEC SENTRON
3VL Molded Case Circuit Breakers according to
UL 489/IEC ALPHA Devices according to UL Standard
BETA Devices according to UL standard
·
·
·
·
·
PROFINET/Industrial Ethernet Industrial Mobile
Communicaton PROFIBUS to IEC 61158/EN 50170 SIMATIC
ET 200 distributed I/Os AS-Interface to EN 50295/IEC 61158
Remote operation with SINAUT Telecontrol Routers ECOFAST system
·
IK PI
IK PI N
LV 50
Order No.:
·
· ·
·
·
·
·
·
System cubicles Cubicle modifications Cubicle expansion
components Accessories Special cubicles
Cubicle solutions in applications Cubicle air-conditioning
Special colors
· ·
·
E86060-K1920-A101-A3-7600
·
SIDAC
Reactors and Filters
Order No.:
E86060-K2803-A101-A4-7600
LV 60
Commutating reactors for converters Mains reactors for frequency converters Iron-core output reactors
Ferrite output reactors Iron-core smoothing reactors Smoothing air-core reactors Filter reactors Application-specific
reactors Radio interference suppression filters dv/dt filters
Sinewave filters
SIVACON 8PS
CD-K, BD01, BD2
Busbar Trunking Systems
up to 1250 A
Order No.:
E86060-K1870-A101-A3-7600
LV 70
Busbar trunking systems, overview CD-K system
(25 A to 40 A) BD01 system (40 A to 160 A)
BD2 system (160 A to 1250 A)
Automation & Drives
The A&D Offline Mall
CD-ROM:
E86060-D4001-A110-C6-7600
DVD:
E86060-D4001-A510-C6-7600
CA 01
All Automation and Drives products,
including those in the catalogs listed above.
·
·
··
·
·
·
·
·
·
·
A&D Mall
Internet:
http://www.siemens.com/
automation/mall
All Automation and Drives products,
including those in the catalogs listed above.
Catalog-PDF
Internet:
http://www.automation.
siemens.com/cd
All catalogs for low-voltage controls and distribution can be
downloaded as PDF files.
Registered trademarks
Technical Assistance
All product designations may be registered trademarks or
product names of Siemens AG or other supplying
companies. Third parties using these trademarks or product
names for their own purposes may infringe upon the rights of
the trademark owners.
Further information about low-voltage controls is available on
the Internet at:
http://www.siemens.com/lowvoltage
·
Expert technical assistance for
Low-voltage controls and
electrical installation.
Tel.: +49 (9 11) 8 95-59 00
Fax: +49 (9 11) 8 95-59 07
E-Mail: technicalassistance@siemens.com
© Siemens AG 2008
SENTRON
PAC3200 Multifunction Measuring
Instruments
Catalog News LV 1 N · 06/2008
The products and
systems listed in this
catalog are manufactured/distributed
using a certified
quality management system which
complies with
EN ISO 9001 (for
the Certificate
Register No. see the
Appendix of Catalog
LV 1 · 2008).
The certificate is
recognized in all
IQ Net countries.
The corresponding section in Catalog
News LV 1 N, which was in circulation up to
04/2008, is replaced by this Catalog News.
Contact your local Siemens representative
for further information
© Siemens AG 2008
© Siemens AG 2008
PG 041, 101, 121, 230, 250, 540 ...
PG 041, 101, 121
3RT, 3TB, 3TF Contactors for Switching Motors
3RA13, 3RA14, 3TD, 3TE Contactor Assemblies
3RT, 3RH, 3TB, 3TC, 3TH, 3TK Contactors for Special Applications
3RH, 3TH Contactor Relays · 3RT Coupling Relays
3TX7, 3RS18 Coupling Relays · LZS, LZX Plug-In Relays
3TG10 Power Relays/Miniature Contactors
6
Load Feeders, Motor Starters and Soft Starters
7
Monitoring and Control Devices
8
Detecting Devices
9
Commanding and Signaling Devices
10
3RV Motor Starter Protectors up to 100 A
3RV Molded Case Motor Starter Protectors up to 800 A
3RB2 Solid-State Overload Relays
3RU1 Thermal Overload Relays
3RW Soft Starters · 3RA Fuseless Load Feeders
3RA6 Fuseless Compact Load Feeders
3RA71 Load Feeders with Safety Integrated
AS-Interface Motor Starters and Soft Starters
ET 200S, ET 200pro Motor Starters
ET 200S Safety Motor Starter Solutions Local / PROFIsafe
ECOFAST Motor Starters and Soft Starters
3RE Encapsulated Starters
SIMOCODE 3UF Motor Management and Control Devices
LOGO! Logic Modules · 3RP, 3RT19 Timing Relays
3UG Monitoring Relays for Electrical and Additional Measurements
3RS10, 3RS11 Temperature Monitoring Relays
3RN1 Thermistor Motor Protection
3TK28 Safety Relays
3RS17 Interface Converters
3RK3 Modular Safety System
3SE2, 3SE3, 3SE5, 3SF1 Position Switches
3SF1 Hinge Switches
3SE6 Magnetically Operated Switches
3SB2, 3SB3, 3SF5 Pushbutton Units and Indicator Lights
3SE7, 3SF2 Cable-Operated Switches
3SE2, 3SE3 Foot Switches
8WD4 Signaling Columns
8WD5 Integrated Signal Lamps
Transformers
Single-Phase Transformers
Three-Phase Transformers
S8, 8PV
For and
resistive
8PT Power
loads: Distribution Boards and Motor Control Centers
8PS Busbar
Systems
· 8MC, 8MF
Cubicle Systems
3RF20,Trunking
3RF21, 3RF22
Solid-State
Relays
8MR,3RF23,
8ME Cubicle
3RF24Air-Conditioning
Solid-State Contactors · 3RF29 Function Modules
ALPHA 630 - DIN Floor-Mounted Distribution Boards
ALPHA
Terminal
Blocks
ForFIX
switching
motors:
ALPHA
8HP Solid-State
Molded-Plastic
Distribution
3RF24
Contactors
and Systems
Solid-State Reversing ContacComponents
for 8US, 8UC, 4NC Distribution Systems
tors
Protection
Switching
Equipment
and Protection Devices
15 5SENTRON
for Power Distribution
3RV Molded Case Motor Starter Protectors up to 800 A
3RB2
Solid-State
Overload Relays
3WL Air
Circuit
Breakers
3RU1 Thermal Overload Relays
Load Feeders,
Switching
Motor
andStarters
Protection
andDevices
Soft Starters
16 6SENTRON
for Power Distribution
3RW Soft Starters
3RA Fuseless
Load Circuit
Feeders
3VL, 3VF2
Molded Case
Breakers
3RA71 Load Feeders with Safety Integrated
AS-Interface Motor Starters and Soft Starters
ET 200S, ET 200pro Motor Starters
ET 200S Safety Motor Starter Solutions Local / PROFIsafe
ECOFAST Motor Starters and Soft Starters
3RE Encapsulated Starters
Monitoring
Switching
and Control
and Protection
Devices Devices
17 7SENTRON
for Power Distribution
SIMOCODE 3UF Motor Management and Control Devices
Logic
Modules
· 3RP, 3RT19 Timing Relays
3KA, LOGO!
3KE, 3LD
Switch
Disconnectors
3UG Monitoring
Relays
for Electrical
Additional Measurements
3KL, 3KM,
3NJ6 Switch
Disconnectors
withand
Fuses
3RS11
Temperature
Monitoring Relays
3NP, 3RS10,
3NJ4, 3NJ5
Fuse
Switch Disconnectors
3RN1 Thermistor Motor Protection
3TK28 Safety Relays
3RS17 Interface Converters
Detecting
for Power
Devices
Distribution
18 8Software
Dimensioning
3SE2, 3SE3,
with SIMARIS
3SE5, 3SF1
design
Position Switches
Configuring,
3SF1 Hinge
Visualizing
Switches
and Controlling with SIMATIC
Configuring,
3SE6 Magnetically
Visualizing and
Operated
Controlling
Switches
with SENTRON
Commanding
Low-Voltage
and
Circuit
Signaling
Protection
Devices
19 9BETA
Miniature
3SB2,
Circuit
3SB3,
Breakers
3SF5 Pushbutton
(MCBs) Units and Indicator Lights
Residual
3SE7,
Current
3SF2Protective
Cable-Operated
Devices
Switches
Low-Voltage
3SE2, 3SE3
Fuse Foot
Systems
Switches
SITOR
8WD
Semiconductor
Signaling Columns4
Fuses
SR 608WD5
Busbar
Integrated
SystemsSignal Lamps
Overvoltage Protection Devices
Socket Outlets
Measuring Devices
Transformers
2010Appendix
Glossary
Single-Phase
· Training Transformers
· Ordering notes · Further documentation ·
Standards
Three-Phase
and approvals
Transformers
· Quality management · Siemens contacts · External partners · Online services · Customer support ·
Software licenses · Subject index
Order number index including metal surcharges and
export markings · Terms and Conditions of Sale and Delivery
Low-Voltage Power Distribution
Protection Equipment
Low-Voltage Power Distribution
SIRIUS Industrial Controls
SIRIUS Industrial Controls
For resistive loads:
3RF20, 3RF21, 3RF22 Solid-State Relays
3RF23, 3RF24 Solid-State Contactors · 3RF29 Function Modules
For switching motors:
3RF24 Solid-State Contactors and Solid-State
Reversing Contactors
5
System Overview
3RT, 3TB,
3TF Contactors
for Measuring
Switching Motors
SENTRON
PAC3200
Multifunction
Instruments New
3RA13, 3RA14, 3TD, 3TE Contactor Assemblies
3RT, 3RH, 3TB, 3TC, 3TH, 3TK Contactors for Special Applications
3RH, 3TH Contactor Relays · 3RT Coupling Relays
3TX7, 3RS18 Coupling Relays
LZS, LZX Plug-In Relays · 3TG10 Power Relays/Miniature Contactors
Controls
Power
Distribution Boards,
14 4SIVACON
Busway
Solid-State
Systems
Switching
and Cubicle
Devices
Systems
Controls Solid-State Switching Devices
PG 041, 101
4
AS-Interface
MotorECOFAST
Starter ESSystem
SIRIUS
ECOFAST
ESSafety Integrated
PROFIBUS
SIMOCODE
ES
SIRIUS
Modular
Modular
Safety
SystemSystem
ES
Soft Starter ES
Controls
Management
–
System
13 3Power
Contactors and Contactor Assemblies
PG 041, 101, 102, 103
Controls Contactors and Contactor Assemblies
PG 041, 101, 102, 103, 121, 131 ...
3
Systems Software
12 2Engineering
Planning and Configuration with SIRIUS
AS-Interface
ECOFAST System
SIRIUS Safety Integrated
PROFIBUS
SIRIUS Modular System
PG 101, 102, 121, 131, 192, 200 ...
Systems
4AV Non-Stabilized
Siemens Automation
Power and
Supplies
Drives. Welcome.
6EP Stabilized
Increase your
Power
competitiveness.
Supplies
Totally Integrated Automation.
- SITOP
Integrated power distribution from a single source. TIP.
- LOGO!Power
Low-voltage controls - For advanced solutions
SIRIUS industrial controls
Low-voltage power distribution
PG 102, 121, 574
2
Introduction
Supplies
11 1Power
© Siemens AG 2008
Answers for Industry.
Low-Voltage Controls and Distribution. The basis for progressive
solutions.
PG 101, 102, 121
Introduction
PG 104, 114
1
© Siemens AG 2008
Explanations
■ General information
Things you should know about Catalog News LV 1 N · 06/2008
Catalog News LV 1 N · 06/2008 contains commercial and technical information on the products listed
in it. The section "Catalog" contains selection and
order-relevant data under the topic headings
"Overview", "Benefits", "Application", "Selection and
ordering data", "Options" and "Accessories".
The topics "Design", "Function", "Configuration", "Technical specifications",
"Characteristic curves", "Dimensional drawings", "Schematics" and "More
information" can be found if required in the integrated Technical Information.
Delivery time class (DT)
}
Preferred type
A
2 working days
B
1 week
C
3 weeks
D
6 weeks
X
On request
Preferred types are available immediately from
stock, i.e. are dispatched within 24 hours.
Normal quantities of the products are usually delivered within the specified time following receipt of
your order at our branch.
In exceptional cases, the actual delivery time may
differ from that specified.
The delivery times apply up to the ramp at Siemens AG (products ready for
dispatch). The transport times depend on the destination and type of shipping.
The standard transport time for Germany is 1 day.
The delivery times specified here represent the state of 10/2007. They are
permanently optimized. For more up-to-the-minute information, please visit our
site at:
http://www.siemens.com/automation/mall.
Price units (PU)
The price unit defines the number of units or meters
to which the specified price and weight apply.
Package sizes (PS)
The package size defines the number, e.g. of units
or meters, for outer packaging.
Only the quantity defined by the package size or a
multiple thereof can be ordered!
Price groups (PG)
Each product is assigned to a price group.
Weight
The defined weight in kg refers to the price unit
(PU).
Dimensions
All dimensions in mm.
4
Siemens LV 1 N Power Management System · 06/2008
For multi-unit packing and reusable packaging see see LV 1 · 2008, Appendix.
© Siemens AG 2008
Explanations
■ Order number index including export markings
Order No.
Export
markings
ECCN
Page
AL
3Z
3ZS
On req.
13/7
7K
7KM21 11
N
7KM21 12-0BA00-2
On req.
N
13/4
7KM21 12-0BA00-3
5D992B1
N
13/4
7KM93 00-0AB
N
N
13/5
7KM93 00-0AM
N
N
13/6
13/4
Siemens LV 1 N Power Management System · 06/2008
5
© Siemens AG 2008
Notes
6
Siemens LV 1 N Power Management System · 06/2008
© Siemens AG 2008
SENTRON Multifunction
Measuring Instruments
Catalog
13/2
13/3
13/4
13/4
13/4
13/5
13/5
13/5
13/6
13/6
13/6
13/7
13/7
13/7
Technical Information
13/8
13/9
13/10
13/11
13/12
13/16
13/17
13/20
13/20
13/20
13/21
13/21
13/21
13
PAC3200 multifunction measuring
instruments
- Overview
- Benefits
- Application
- Selection and ordering data
- More information
Expansion modules
PAC PROFIBUS DP
- Overview
- Application
- Selection and ordering data
PAC RS485
- Overview
- Application
- Selection and ordering data
Software
SIMATIC PCS 7 Library PAC3200
- Overview
- Application
- Selection and ordering data
PAC3200 multifunction measuring
instruments
- Design
- Function
- Integration
- Configuration
- Technical specifications
- Dimensional drawings
- Schematics
Expansion modules
PAC PROFIBUS DP
- Technical specifications
- Dimensional drawings
- More information
PAC RS485
- Technical specifications
- Dimensional drawings
- More information
Siemens LV 1 N
Power Management System · 06/2008
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
■ Overview
13
Measuring precisely with SENTRON PAC3200 - New
dimensions with the multifunction measuring instrument
The SENTRON PAC3200 is a control panel instrument for measuring and indicating more than 50 electric power distribution
variables such as voltage, current, power, electrical work and
frequency with their minimum, maximum and mean values. It
convinces through its compact design and high performance
capacity.
A large, backlit graphic display can be read even from great distances. User-friendly, intuitive operation is made possible by
plain text displays in nine languages in combination with four
function buttons. Language selection is possible either directly
on the device or using configuration software. SENTRON
PAC3200 offers several communication options in addition to
one digital input and one digital output. For integration in a
higher-level power management system it is possible to use either the integrated Ethernet interface or the optionally available
expansion modules.
SENTRON PAC3200 is also available with UL and CSA approval
for use in the USA and Canada.
The SENTRON powerconfig software for user-friendly device
configuration is included in the scope of supply.
The product variants of the SENTRON PAC3200
PAC3200
Type
With AC/DC power supply unit with wide
voltage range and screw terminals
7KM21120BA003AA0
• UAUX: 95 ... 240 V AC ±10 %, 50/60 Hz
110 ... 340 V DC ±10 %
• Ue:
max. 3 AC 690/400 V, 50/60 Hz
With DC power supply unit with extra-low
voltage and screw terminals
With screw
terminals
• UAUX: 22 ... 65 V DC ±10 %
max. 3 AC 500/289 V
7KM21111BA003AA0
• Ue:
With AC/DC power supply unit with wide
voltage range and cable lug terminals
• UAUX: 95 ... 240 V AC ±10%, 50/60 Hz
110 .... 340 V DC ±10 %
• Ue:
7KM21120BA002AA0
max. 3 690/400 V AC, 50/60 Hz
With cable lug
terminals
More information is available on the Internet at:
www.siemens.com/powermanagementsystem
13/2
Siemens LV 1 N Power Management System · 06/2008
The advantages of the SENTRON PAC3200 at a glance:
• Three-phase control panel measuring device for measuring
electrical variables
• Measuring more than 50 variables such as phase voltage and
phase-to-phase voltage, current, power, work, power factor,
frequency, etc.
• High measuring accuracy for electrical work; Class 0.5S
according to IEC 62053-22
• Can be used for single-phase measurements as well as for
multiphase measurements in 3 and 4-conductor networks
• Can be connected directly to three-phase industrial networks
up to 690/400 V or up to max. 500/289 V for devices with DC
power supply unit with extra-low voltage (CATIII)
• Measuring higher voltages using a voltage transformer;
adjustable transformer ratio
• For x/1A and x/5A current transformers; adjustable transformer ratio and current direction
• 2 device types available with power supply unit with wide
voltage range and with extra-low voltage in order to cover all
standard AC and DC auxiliary voltage supply needs
• Slot for expansion modules such as the SENTRON PAC
PROFIBUS DP or SENTRON PAC RS485 communication
modules
• Small space requirement thanks to compact design (96 mm x
96 mm, mounting depth 51 mm or 73 mm with module)
• Large, graphic LCD display with intuitive user operation using
function buttons
• Menu selections, test displays and documentation available in
nine languages (German, English, Portuguese, Turkish,
Spanish, Italian, French, Chinese and Russian)
Language selection on the device or using configuration
software
• IP65 using standard sealing
• Multifunctional digital input, for example for detecting counting pulses or for monitoring the status of switching devices
• Multifunctional digital output, for example for emitting active or
reactive power pulses (S0) or for indicating limit value
violations
• Monitoring of up to 6 limit values and connecting the limit
values with logical AND / OR operations
• Measuring period averages for active and reactive power with
minimum and maximum value
• Operating hours meter for indicating the load running time
• Integrated Ethernet interface (Modbus TCP or SEAbus TCP)
for integration in power management systems
• UL and CSA approval for the USA and Canada
• CD with SENTRON powerconfig software for user-friendly
device configuration included in scope of supply
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
Measurement functions
The SENTRON PAC3200 measures the following variables:
Current
Voltage L-N
Voltage L-L
Frequency
Active power per phase
input "+" / output "-"
Reactive power per phase
pos./neg. or ind./cap.
Apparent power per phase
Active power total
input "+" / output "-"
Reactive power total
pos./neg. or ind./cap.
Apparent power total
Power factor per phase
Power factor total
Active work total
input "+" / output "-"
Reactive work total
pos./neg. or ind./cap.
Apparent work total
THD voltage per phase
THD current per phase
Voltage asymmetry
Current asymmetry
Operating hours
Universal counter
1)
2)
3)
Display range
L1/L1-2
L2/L2-3
L3/L3-1
0 A ………120 kA
0 V …….. 700 kV
0 V …..… 1200 kV
44.00 … 67.00 Hz
0 W ….. 100 GW
✓
✓
✓
✓
✓
✓
Total
Minimum Mean
value
value
Maximum
value
✓
✓1)
✓
✓1)
✓
✓
✓1)
✓
✓
✓
✓
---
✓
✓
--
--
✓
✓
✓
------
0 var … 100 Gvar
✓
✓
✓
--
✓
--
✓
0 VA … 100 GVA
0 W … 100 GW
✓
✓
✓
--
✓
--
✓
--
--
--
✓
✓
✓2)
✓
0 var … 100 Gvar
--
--
--
✓
✓
✓2)
✓
0 VA … 100 GVA
0 …1
0 …1
0 Wh … 1000 GWh
--
--
--
✓
✓
✓
✓
--
✓
---
---
---
✓
✓
✓3)
--
-----
✓
✓
0 varh … 100 Gvarh
--
--
--
✓3)
--
--
--
0 VAh … 100 GVAh
0 … 100 %
0 … 100 %
0 … 100 %
0 … 100 %
0 h … 300 years
0 … 999,999,999 pulses
--
--
--
✓3)
✓
✓
✓
✓
✓
---
-----
-----
-----
--------
--------
--
✓
✓
The values quoted are mean values of all three phases.
Can be called up only through communication. The power averages
(power count values), including minimum and maximum values, are
transmitted for a selectable measurement period. The measurement
period can be selected in the range 1 … 60 min; the default setting is
15 min.
✓
✓
✓
✓
✓
✓
✓
13
Variable
✓
✓
--
✓
✓
-----
✓ Measuring possible
-- Measuring not possible or not meaningful
The values for high rate and low rate are shown on the display.
■ Benefits
• Thanks to the wide range of functions, only one device variant
is required for different measuring tasks – this saves storage
costs and procurement costs.
• Easy and quick mounting saves installation costs.
• Connection to power supply networks up to 690 V1) without a
voltage transformer saves space in the control cabinet and
costs (transformer costs, transformer mounting and installation costs).
• Comprehensive and precise power measurements form the
basis for identifying savings potential in the system.
• The many different measuring and monitoring functions of the
SENTRON PAC3200 contribute indirectly to a higher level of
availability because faults are detected early.
• With its technical configuration, various approvals and certifications such as UL and CSA for the USA and Canada, and
support for nine languages, the SENTRON PAC3200 can be
used world-wide.
• A large, illuminated graphic display guarantees good reading
even in poor light conditions and opens up a wider application
area for the device.
• Through the multilingual, intuitive user operation of the
PAC3200, valuable time can be saved during start-up and
operation.
• Thanks to the network-capable Ethernet interface, which is included without additional price in every standard device, the
costs for system integration can be lowered. At the same time
the high transmission speed helps to increase the performance of the overall system notably.
• The SENTRON powerconfig configuration software makes it
easier to configure the devices. This results in considerable
time savings, particularly when several PAC3200 units have to
be configured.
• Easy integration in automation systems or power management
systems, for example SIMATIC WinCC powerrate or
SIMATIC PCS 7, is favored by the optional PAC PROFIBUS DP
and PAC RS485 expansion modules interface, thus saving
time and implementation costs.
• The SENTRON PAC3200 has a mounting depth of only 51 mm
which means that it can also be installed in equipment with
little depth.
1)
Max. 500 V (UL-L) for version with DC power supply unit with extra-low
voltage (7KM2111-1BA00-3AA0)
Siemens LV 1 N Power Management System · 06/2008
13/3
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
13
■ Application
Three-phase multifunction measuring instruments are used to
measure and indicate all relevant network parameters of an
electrical installation and they monitor these parameters
permanently.
for power management systems and for plant and building
automation.
Uses
Power distribution systems for the power supply are needed in
all sectors of industry. SENTRON PAC3200 is used accordingly
in all sectors where power consumption and electrical parameters are to be measured.
Wherever power has to be distributed, be it in industrial or infrastructural buildings, the SENTRON PAC3200 supplies important
information to the building services system or the power controlling system.
Industries
The many different communication options offered by the
SENTRON PAC3200 make it an indispensable supplier of data
■ Selection and ordering data
Version
DT
Order No.
Price
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
7KM2112-0BA00-3AA0
SENTRON PAC3200
Screw terminals
A
Control panel instrument 96 mm x 96 mm
Screw terminals for connecting current and
voltage
7KM2112-0BA00-3AA0
1
1 unit
133
0.325
1
1 unit
133
0.325
1
1 unit
133
0.325
AC/DC power supply unit with wide voltage
range
UAUX:
95 … 240 V AC ±10 %, 50/60 Hz
110 … 340 V DC ±10 %, 50/60 Hz
Measuring inputs
Ue: max. 3 AC 690/400 V, 50/60 Hz
Ie: /1 A or /5 A
SENTRON PAC3200
Screw terminals
A
Control panel instrument 96 mm x 96 mm
Screw terminals for connecting current and
voltage
7KM2111-1BA00-3AA0
DC power supply unit with extra-low
voltage
UAUX: DC 22 … 65 V ±10 %
7KM2111-1BA00-3AA0
Measuring inputs
Ue: max. 3 AC 500/289 V, 50/60 Hz
Ie: /1 A or /5 A
Cable lug terminals
SENTRON PAC3200
Control panel instrument 96 mm x 96 mm
Cable lug terminals for connecting current
and voltage
7KM2112-0BA00-2AA0
A
7KM2112-0BA00-2AA0
AC/DC power supply unit with wide voltage
range
UAUX:
95 … 240 V AC ±10 %, 50/60 Hz
110 … 340 V DC ±10 %
Measuring inputs
Ue: max. 3 690/400 V AC, 50/60 Hz
Ie: /1 A or /5 A
■ More information
Suitable current transformers can be found
• in Catalog LV 1 2008, section "SIVACON Power Distribution
Boards, Busway and Cubicle Systems" --> "Components for
8US, 8UC 4NC Distribution Systems, 4NC Current Transformers for Measuring Purposes"
• in the A&D Mall, section "Low-Voltage Controls" --> "Low-Voltage Power Distribution" --> "SIVACON Power Distribution
Boards, Busway and Cubicle Systems" -->"Components for
8US, 8UC, 4NC Distribution Systems" --> "4NC Current Transformers for Measuring Purpose".
* You can order this quantity or a multiple thereof.
13/4
Siemens LV 1 N Power Management System · 06/2008
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
Expansion modules
PAC PROFIBUS DP
The PAC PROFIBUS DP expansion module has the following
features:
• PROFIBUS DP plug-in communication module for SENTRON
PAC3200
• Parameterizable from the front of the device or using
parameterization software
• Using PROFIBUS DPV1, data can be transferred in both cyclic
and acyclic modes
• Easy integration using GSD file, with free choice of the
measurement variables to be transmitted
• Plug and play
• All baud rates from 9.6 Kbit/s to 12 Mbit/s are supported
• Connection through 9-pole Sub-D connector according to
IEC 61158
• No external auxiliary power necessary
• Status indication by LED on the module
■ Application
The SENTRON PAC PROFIBUS DP communication module is
plugged onto the rear of the PAC3200 multifunction measuring
instrument. The device identifies the module automatically and
presents the parameters of relevance for this module for selection in the parameterization menu.
All measurement variables supplied by the PAC3200 are selected and cyclically or acyclically transmitted by means of the
GSD file.
The state of the module is indicated by an LED.
■ Selection and ordering data
Version
DT
Order No.
Price
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
PAC PROFIBUS DP
Expansion module for
SENTRON PAC3200
(PROFIBUS DPV1)
A
7KM9300-0AB00-0AA0
1
1 unit
133
0.045
7KM9300-0AB00-0AA0
* You can order this quantity or a multiple thereof.
Siemens LV 1 N Power Management System · 06/2008
13/5
13
■ Overview
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
Expansion modules
PAC RS485
■ Overview
13
The PAC RS485 expansion module has the following features:
• PAC RS485 plug-in communication module for SENTRON
PAC3200
• Parameterizable from the front of the device or using
parameterization software
• Modbus RTU and SEAbus protocols are supported
• Plug and play
• Baud rates of 4.8 / 9.6 / 19.2 and 38.4 kBd are supported
• Connection by means of 6-pole screw terminals
• No external auxiliary power necessary
• Status indication by LED on the module
■ Application
The SENTRON PAC RS485 communication module is plugged
onto the rear of the PAC3200 multifunction measuring instrument. The device identifies the module automatically and presents the parameters of relevance for this module for selection
in the parameterization menu. The state of the module is indicated by the integrated LED.
In connection with the PAC3200, the Modbus RTU and SEAbus
protocols are supported with baud rates of 4.8 / 9.6 / 19.2 and
38.4 kBd.
■ Selection and ordering data
Version
DT
Order No.
Price
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
PAC RS485
Expansion module for
SENTRON PAC3200
(SEAbus and Modbus RTU)
A
7KM9300-0AM00-0AA0
1
1 unit
133
0.041
7KM9300-0AM00-0AA0
* You can order this quantity or a multiple thereof.
13/6
Siemens LV 1 N Power Management System · 06/2008
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
Software
SIMATIC PCS 7 Library PAC3200
■ Overview
Features
• Full integration of SENTRON PAC3200 in the PCS 7 process
control system through PROFIBUS DPV1 using a certified
PCS 7 add-on module
• Reading out and displaying device data
• Inputting limit values – for monitoring through the driver block
• Resetting values on the device (min/max values)
13
Product components:
• Driver block
• Diagnostics block
• Faceplates
■ Application
The PCS 7 function block library − SIMATIC PCS 7 Library
PAC3200 − for the SENTRON PAC3200 multifunction measuring
instrument enables the seamless integration of the multifunction
instrument in the PCS 7 process world.
It comprises one driver block, one diagnostics block and the
faceplates. The blocks in the SIMATIC S7 supply energy data to
the faceplates in the user interface of the process control system, generate signals and guarantee connection to the maintenance system of PCS 7.
Between the driver and the SENTRON PAC3200 there exists a
bilateral communication connection which permits not only the
transfer of measured values and states from the device but also
the changing of for example limit values in the device.
Faceplates
Faceplates serve as a user interface for operating and monitoring and enable technologically important values and functions of
the SENTRON PAC3200 to be displayed and performed as a
PCS 7 object. Between the driver and faceplates there exist on
the system side bidirectional communication connections not
only for displaying values in the faceplates but also for forwarding input data from the operator.
This makes the SENTRON PAC3200 power monitoring device an
integral component of PCS 7.
System requirements
The SIMATIC PCS 7 Library PAC3200 runs with
• PCS 7 V6.1 SP1 (and higher) and
• PCS 7 V7.0 (and higher).
Supported operating systems are the same as for SIMATIC
PCS 7, see Catalog ST PCS 7 or the Mall, section "Automation
Systems" --> "Process Automation" --> "Process Control
Systems".
■ Selection and ordering data
Version
DT
Order No.
Price
per PU
PU
(UNIT,
SET, M)
PS*
PG
Weight
per PU
approx.
kg
SIMATIC PCS 7 Library PAC3200
Engineering + Runtime license
3ZS2781-1CC10-0YG0
1
1 unit
133
0.250
3ZS2781-1CC10-6YH0
1
1 unit
133
0.250
SIMATIC PCS 7 Library PAC3200
Runtime license
* You can order this quantity or a multiple thereof.
Siemens LV 1 N Power Management System · 06/2008
13/7
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
■ Design
Enclosures
Operating and indicating elements
SENTRON PAC3200 comes with a plastic enclosure for installation in control panels. It is fastened by one holder on the right
side of the device and one on the left side.
The following picture shows the SENTRON PAC3200 from the
front, divided into the function blocks provided for operation and
monitoring, including a description.
The header bar shows in plain text which
measurement values are presented in the
current display. For easier navigation, the
menu number of the display is shown on the
far right.
2
The measured
values with
phase identifer
and unit of
measurement
are shown in
the middle of
the display.
The scrollbar and the
menu number in the
display header together
indicate in which
display or parameter
menu you are, thus
enabling fast and
selective navigation.
NSE0_01953
Four function buttons with context-sensitive
descriptions for operating the device.
$
%
NSE_01947
13
1
Opening in the device for attaching the mounting holder
Device holder with retention lugs
Mounting the SENTRON PAC3200
Front of the SENTRON PAC3200
To mount the SENTRON PAC3200 it is inserted from the front
through the square cut-out in the control cabinet door and
secured with the supplied holders.
The device is operated using 4 function buttons, which correspond to the 4 text fields situated above them. The buttons are
each assigned with several functions; their function at any time
depends on the menu then displayed. Which function a button
has in the respective menu is indicated by the text in the related
display.
From the front, i.e. in the installed state, the device complies with
Safety Class II with degree of protection IP65.
The following picture shows how to join together the SENTRON
PAC3200 and the expansion module in the light of the rear view
of the SENTRON PAC3200 and the top view of the expansion
module (here: PAC PROFIBUS DP).
0,5 Nm
2x
SN62217-B3x22
$
%
&
(
NSE0_01952
Device and module enclosure
Fixing screws and related holes in the enclosure
PROFIBUS connectors
Fixtures for the PROFIBUS connector
Mounting the expansion module based on the example of the
PAC PROFIBUS DP on the SENTRON PAC3200
13/8
Siemens LV 1 N Power Management System · 06/2008
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
Precise measurement of variables
Mounting and start-up in the shortest possible time
With its high accuracy, the SENTRON PAC3200 meets the increasing demand for precise power measurement. It satisfies
the accuracy requirements of Class 0.5S according to
IEC 62053-22 for solid-state active consumption meters.
With its ingenious mounting method the SENTRON PAC3200 is
quick and easy to install using combination latching holders.
Transparency in power matters
Altogether 10 power meters for active, reactive and apparent
work monitor the power consumption in the system, separately
according to the high rate and low rate, for both power input and
power feedback.
This makes the SENTRON PAC3200 the optimum choice of data
supplier for a higher-level power management system.
Integrated in such a system it enables the user to record his
installation's load profile.
For this purpose the SENTRON PAC3200 also supplies the
required power averages for active and reactive power.
The pair of combination holders performs two functions:
• Thanks to the latching mechanism the fitter can fasten the
device in the control panel quickly and without the use of any
tools.
• If greater protection is required, the four screws of the latching
holder can be used to increase its contact pressure evenly on
all sides so that the control panel cut-out is cleanly sealed by
the integrally molded gasket, which is a standard feature. The
often bothersome and time-consuming insertion of an accessory gasket is a thing of the past.
As the result of the easy-to-use combination holders and the
small mounting depth of only 51 mm it is easy to mount several
devices side by side.
Plain-text displays
Powerful communication
A large, full graphic LCD display enables easy reading even
from great distances. To make sure that this is also the case in
poor light conditions, the background lighting can be individually adapted to the actual requirements.
Unique in this device class up to now is the Ethernet interface
provided as a standard feature which can be used not only for
configuration purposes using SENTRON powerconfig but also
for system communication in a higher-level power management
system. For optimum system adaptation it is possible to switch
between the SEAbus TCP protocol and the Modbus TCP
protocol.
Operation, also multilingual
A special highlight is the intuitive user operation. Operation is
quick to learn using the four function buttons together with multilingual plain text displays. Following languages can be selected: German, English, Portuguese, Turkish, Spanish, Italian,
French, Chinese and Russian.
The optional SENTRON PAC PROFIBUS DP and PAC RS485 expansion modules for Modbus RTU and SEAbus are available for
communication in a network.
Integration in PROFIBUS takes place using a standardized text
file called the GSD (Geräte-Stammdaten-Datei). This GSD file is
read into the master with the help of the PROFIBUS configuration
tool. The master thus receives the slave-specific framework of
the PAC3200 and can start cyclic operation immediately.
Integration in Modbus RTU or SEAbus systems takes place
through parameterization of the device address and baud rate
using the device keyboard or SENTRON powerconfig.
Multifunctional digital input and output
The SENTRON PAC3200 is equipped with one digital input and
one digital output, to each of which various functions can be
assigned.
Operating languages of the PAC3200
Direct navigation is available in addition for the experienced
user, who can thus call up the menus of choice even more
quickly.
Functions of the digital input:
• Counting input for work pulses (kWh, kvarh) from third-party
devices
• Status monitoring of a switching device
• Rate switchover between high rate and low rate
• Signal input for synchronization of the measurement period
Functions of the digital output:
• Pulse output for sending work pulses
(kWh, kvarh)
• Alarm output for signaling limit value violations
• SENTRON PAC3200 operating state indicator
• Phase sequence indicator
• Switching output for remote control using system software
With its wide range of functions, the SENTRON PAC3200 can be
used in all applications.
Siemens LV 1 N Power Management System · 06/2008
13/9
13
■ Function
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
Monitoring of measurement variables for limit value
violations
13
The SENTRON PAC3200 can monitor up to 6 measurement variables for violation of an adjustable upper or lower limit value. The
following variables can be monitored: voltage, current, power,
power factor, THD U/I, frequency or asymmetry of voltage and
current
The following can be assigned to each limit value:
• A measurement variable:
UL-N, UL-L, IL, PL, QL, SL, LFL, THD-UL/IL for all 3 phases and
UL-N, mean value, UL-L, mean value, IL, mean value, Stot, Ptot,
Qtot, LFtot, frequency, asymmetry U / I
• The monitoring mode (overshooting or undershooting)
• A limit value
• A delay time and
• A hysteresis
■ Integration
Using the interface modules it is possible to integrate the
SENTRON PAC3200 in every I&C system or every SIMATIC S7
environment.
When the SENTRON PAC3200 is fully integrated in a power management system, e.g. SIMATIC WinCC powerrate or SIMATIC
PCS 7 powerrate, it monitors the power consumption.
At the same time the SENTRON PAC3200 helps to monitor the
operating state of the installation. Measured values, limit value
violations, operating hours of a connected load or power flows
are supplied by the device quickly and reliably.
Faceplates
In addition the limit values can be interconnected by an AND/OR
logic function. Like the individual limit values, the result of the
logic operation can also trigger certain actions.
It is possible to select the action which will be triggered by violation of a limit value. For example, a signal can be sent through
the digital output or the communication interface. The integrated
universal counter can be used to total the number of limit value
violations. Whether a limit value has been violated is indicated
on the device.
Industrial Ethernet
PROFIBUS
Monitoring of voltage and current for asymmetry
PROFIBUS
The device measures, among other things, the asymmetry of
voltage and current in the network. Now that a limit value can
also be assigned to these two parameters, problems due to unsymmetrical loads in the installation can be detected early and
avoided.
Operating hours meter
An important service function is performed by the integrated operating hours counter, which can be used to monitor e.g. pumps,
motors or machines. The counter measures the running time of
a connected load, helping to ensure that important maintenance
intervals are observed. The count can be read out and evaluated
by a PC. A higher-level power management system is thus able
to generate a suitable maintenance message.
Universal
The SENTRON PAC3200 can be used for measuring in two,
three and four-conductor networks. It is capable of measuring in
three phases as well as in one and two phases.
Thanks to its large measuring voltage range, the device can be
directly connected in every low-voltage system up to a rated
system voltage of 690 V (UL-L). Higher voltages can be measured using voltage transformers.
For measuring currents it is possible to use both x/1A and x/5A
current transformers. Transformer ratios and current direction
can be programmed on the device for adaptation to local
conditions.
Protection against unauthorized access
The SENTRON PAC3200 comes with integrated password
protection so that the power and parameter data are safe from
unauthorized access. Changes to the parameterization can be
traced using a configuration counter which can be read out
through an interface.
13/10
Siemens LV 1 N Power Management System · 06/2008
S7 driver / component
16(BE
Integration of the SENTRON PAC3200 in SIMATIC PCS 7 /
WinCC powerrate
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
■ Configuration
Configuration directly on the device
Simplified making of connections through search function
The SENTRON PAC3200 is designed for user-friendly configuring directly on the device. All menus are displayed in plain text
and are self-explanatory. No manual is required therefore.
SENTRON powerconfig comes with a search function which facilitates the finding of all PAC3200 units connected to the same
network. Making the first connection is thus easier. Both the communication status and the configuration status are indicated by
symbols in the tree view.
With the project manager in SENTRON powerconfig it is possible
to save device configurations and also to copy them if required.
For the documentation of device configurations, SENTRON
powerconfig has a user-friendly printing function with preview
feature.
Off-line device configurations
Configuring interface of the SENTRON PAC3200
Configuring with SENTRON powerconfig is user-friendly
The scope of supply of the PAC3200 includes the SENTRON
powerconfig software for the user-friendly configuring of the
PAC3200 from the PC.
The software runs on the following operating systems:
• Windows 2000 Professional SP4 and higher
• Windows XP Professional SP2 and higher
SENTRON powerconfig is available in German or English, with
selection possible at any time through the Options menu. The integrated online help is likewise bilingual and describes the software's functions in detail.
After SENTRON powerconfig is installed, the PAC3200 can be
connected to the PC in two ways:
• Using a commercially available crossover cable which
connects the PAC3200 directly to the network interface of
the PC
• Or using a hub/switch in an Ethernet network. In this case
conventional patch cables are used.
6(17521
SRZHUFRQILJ
(WKHUQHW
(WKHUQHW
&URVVRYHUFDEOH
Using the offline device configurations, all the devices of a plant
can be configured in the comfort of the office as follows:
• Creating the offline device configurations: All available devices and expansion modules are grouped in a library. The required PAC3200 units are selected from the library and moved
into the device tree by means of Drag & Drop.
Expansion modules can be added to the device tree in the
same way. However, they can only be entered under a device.
• Sending the offline device configurations: During start-up, the
offline device configurations can be sent to the devices as
soon as they are connected to SENTRON powerconfig.
User interface of SENTRON powerconfig
The individual subwindows can be positioned on the monitor as
required, including outside the main window of SENTRON
powerconfig. In this way the interface of the software can be
adapted to the user's individual preferences.
The figure below shows the program interface of SENTRON
powerconfig by way of example.
3$&
Direct connection between the PC and PAC3200
(WKHUQHW
(WKHUQHW
6(17521
SRZHUFRQILJ
6ZLWFK+XE
3$&
Configuring interface of SENTRON powerconfig
16*B
Connection between the PC and PAC3200 through a hub/switch
Note:
The required cable material is not included in the scope of
supply.
Siemens LV 1 N Power Management System · 06/2008
13/11
13
Configuration management
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
■ Technical specifications
Measurement
Networks
Voltage types
Only for alternating voltage systems
Number of phases
1, 2 or 3-phase
Number of conductors
3 or 4 conductors
Load type
Same or any load
4 quadrants (input and output)
Quadrants
Hz
13
Frequency of fundamental wave
50/60
Signal detection
For power, current and voltage
Seamless
Curve shape
Sinusoidal or distorted
Measuring inputs for voltage
Rated voltage 3 AC Ue (max.)
Device with AC/DC power supply unit
with wide voltage range
Device with DC power supply unit with
extra-low voltage
7KM2112-0BA00-3AA0 or
7KM2112-0BA00-2AA0
Phase/N
V AC
400 (max. 347 for UL) +20 %
Phase/phase
V AC
690 (max. 600 for UL) +20 %
Phase/N
V AC
289 +20 %
Phase/phase
V AC
500 +20 %
7KM2111-1BA00-3AA0
CAT III
Measuring category
Input resistance
Phase/N
MΩ
1.05
Per phase
mW
220
Adjustable
AC A
1 or 5
With setting 1 A
AC A
0.01 ... 1.2
With setting 5 A
AC A
0.05 ... 6
Permanent
AC A
10
For 1 second
AC A
100
Per phase
mVA
4 at 1A, 115 at 5A
Power consumption
Measuring of voltages > 690 or 500 V AC using
voltage transformer
Measuring inputs for current
Rated current 3 AC Ie per phase
Operating range current per phase
Permanent load capacity
Surge overload capability
Power consumption
CAT III
Measuring category
Zero point suppression
Adjustable
%
0 ... 10
Measuring of currents using current transformer
Supply voltage
AC/DC
Power supply unit with wide voltage
range
Operating range
7KM2112-0BA00-3AA0 or
V AC
95 … 240 ±10 %
7KM2112-0BA00-2AA0
V DC
110…340 ±10 %
Hz
50/60
Rated frequency
DC
Power supply unit with extra-low
voltage
V DC
22 … 65 ±10 %
Without optional expansion module
VA
6
Including optional expansion module
VA
8
Operating range
7KM2111-1BA00-3AA0
Power consumption
Overvoltage category
13/12
Siemens LV 1 N Power Management System · 06/2008
CAT III
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
Fault limits
Voltage
%
±0.3
Current
%
±0.2
Rating
%
±0.5
Frequency
%
±0.05
Power factor
%
±0.5
Active energy
Class 0.5S according to IEC 62053-22:2003-01
Reactive energy
Class 2 according to IEC 62053-23:2003-01
13
When taking measurements on external current or voltage transformers, the
accuracy of the measurements depends on the quality of the transformers.
Digital input
1
Number
Rated value
V DC
24
Max. input voltage
V DC
30
Input threshold signal "1"
V DC
> 13
Input threshold signal "0"
V DC
<8
Input current signal "1"
DC mA 7
Digital output
1
Number
Required voltage
V DC
12 ... 24
Max. switched output voltage
V DC
30
Output current signal "0"
DC mA Max. 0.2
Output current signal "1"
Typical
Permanent
Short-time overload for max. 100 ms
Resistive load
DC mA
DC mA
DC mA
DC mA
10 ... 27
100
300
100
Switching frequency
Hz
17
Yes
Short-circuit protection
Communication
RJ45 socket
MBit/s 10
Either SEAbus TCP or Modbus TCP (selectable)
Ethernet
Transmission rate max.
Protocol
PROFIBUS DP
Using expansion module
Transmission rate max.
Variables to be transmitted
RS485
Using expansion module
Transmission rates
Protocol
PAC PROFIBUS DP
V1
MBit/s 12
Definable using GSD file
PAC RS485
kBd
Optionally 4.8 /9.6 /19.2 / 38.4
Optionally SEAbus or Modbus RTU (selectable)
Indicating and operating
LCD, full graphic
Display type
Alphanumeric and text
Displays
Resolution
Dots
128 x 96
Size
mm
72 x 54
Contrast
Adjustable
Display
Display invertible, pos/neg mode
Background lighting
Lighting intensity
Lighting intensity dimmed
Dimming time
Adjustable
Adjustable
0 ... 99
Languages
min
German, English, Portuguese, Turkish, Spanish, Italian, French, Chinese
and Russian
Siemens LV 1 N Power Management System · 06/2008
13/13
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
Connection elements and terminals
Measuring inputs and supply voltage
Conductor cross-sections
Screw terminals
mm2
Solid
1 x 0.5 ... 4
AWG 1 x 20 ... 12
mm2
2 x 0.5 ... 2.5
AWG 2 x 20 ... 14
Finely stranded with end sleeve
mm2
1 x 0.5 ... 2.5
AWG 1 x 20 … 12
mm2
2 x 0.5 ... 1.5
± screw, Pozidriv
2
Ring terminal lug connections
Measuring inputs and supply voltage
Conductor cross-sections
mm2
Dependent on
ring terminal lug used
1 x 1.0...6.0
AWG 1 x 18...10
/
mm
D: 3...4
NO: 0,75 ... 1.0
W: ≤ 8
L1: ≤ 24
L2: ≤ 20
L3: ≥ 8
Inch
D: 0,118 ... 0,157
NO: 0.029 ... 0.039
W: ≤ 0.314
L1: ≤ 0.944
L2: ≤ 0.787
L3: ≥ 0.314
/
'
Tool size
NSG0_00229
:
/
6
13
AWG 2 x 20 … 16
Tool size
2
± screw, Pozidriv
Screw terminals
Digital output, digital input
Conductor cross-sections
Solid
mm2
1 x 0.2 … 2.5
mm2
2 x 0.2 … 1.0
AWG 1 x 24 ... 12
Finely stranded with end sleeve
mm2
1 x 0.25 … 2.5
mm2
2 x 0.25 … 1.0
AWG 1 x 24 … 12
Tool size
± screw, Pozidriv
1
Dimensions and weights
According to IEC 61554
Enclosure for installing in control panel
Enclosure dimensions (W x H x D)
Without expansion module
With expansion module
mm
mm
96 x 96 x 56
96 x 96 x 78
Mounting depth
Without expansion module
With expansion module
mm
mm
51
73
Control panel thickness
mm
0.5 … 4
g
g
325
370
Weight
Without expansion module
With expansion module
Approx.
Approx.
Degree of protection and safety class
Safety class according to EN 61010-1
From the front when installed
Degree of protection according to
EN 60529
All devices
Device with screw terminals
Device with cable lug terminals
13/14
II
Mountable on front
Rear
Rear
Siemens LV 1 N Power Management System · 06/2008
IP65
IP20
IP10
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
Ambient conditions
Temperature range
Operating temperature
Storage and transport temperature
°C
°C
-10 … +55
-25 … +70
Relative air humidity
At 25 °C without condensation
%
95
Operating altitude
Above sea level up to max.
m
2000
2
Degree of pollution
Safety
13
4-digit numeric code
Password protection
Safety requirements
Verification of suitability as EC conformity declaration Device test according to the following standards
IEC 61010-1:2001 (2nd Ed.) with Corr.1
EN 61010-1-1:2001 (2nd Ed.)
EN 61010-1:2002 with Corr.1
Verification of suitability as approval for the USA and Canada
UL 61010-1, 2nd Ed. CAN/CSA-C22.2 NO. 61010-1-04
Electromagnetic compatibility
IEC 61000 6-4 Group 1;
Class A / CISPR11 Group 1;
Class A FCC Part 15 Subpart B;
Class A
Emitted interference
Enclosure interference immunity
Electrostatic discharge
IEC 61000-4-2:2001-04
Electromagnetic fields
IEC 61000-4-3:2006-02
Line-frequency magnetic fields
IEC 61000-4-8:2001-03
Measuring and supply voltage
Voltage dips
IEC 61000-4-11:2004-03
Rapid transients
EN 61000-4-4:2005-07
Surge voltages
EN 61000-4-5:2001-12
Line-conducted RF signals
EN 61000-4-6:2001-12
Inputs and outputs, interfaces
Rapid transients
IEC 61000-4-4:2004-07
Surge voltages
IEC 61000-4-5:2005-11
Line-conducted RF interference fields
EN 61000-4-6:2001-12
Mechanical dynamic stress
Vibratory load
Conditions of use/transport
According to IEC 60068 Part 2-6:1995-03 / EN 60068 Part 2-6:1996-05
Seismic stress
According to IEC 60068 Part 3-3:1991-02 / EN 60068 Part 3-3:1993-09
Shock stress
According to IEC 60068 Part 2-27:1987 / EN 60068 Part 2-27:1995-03
Bumping, resistance
According to IEC 60068 Part 2-27:1987 / EN 60068 Part 2-27:1995-03
According to IEC 60068-2-29:1987 / EN 60068 Part 2-29:1995-03
Continuous bumping
Mechanical strength
Against surges and shocks
According to IEC 60068-2-75:1997-08
Siemens LV 1 N Power Management System · 06/2008
13/15
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
■ Dimensional drawings
Dimensions of multifunction measuring instrument
51
F3
91
96
F4
96
51
10
F2
NSE0_01955
F1
91
96
13
73
73
Left: Front view; middle: PAC3200 with screw terminals, view from the right; right: PAC3200 with cable lug terminals, view from the right
max. 4 mm
70
92+0,8
Cut-out from the front
Left: PAC3200 with screw terminals, view from the right
Right: PAC3200 with cable lug terminals, cut-out from right
Mounting clearances
13/16
F2
F3
F4
NSE_01958
135
F1
70
NSE0_01956
NSE_01957
92+0,8
max. 4 mm
70
Control panel cut-out, lateral
70
Control panel cut-out
F1
F2
F3
Siemens LV 1 N Power Management System · 06/2008
F4
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
■ Schematics
Connection examples
Connection example 1:
Connection example 4:
Three-phase measurement, four conductors, asymmetric load,
without voltage transformer, with three current transformers
Three-phase measurement, four conductors, symmetric load,
with voltage transformer, with one current transformer
;
;
;
13
;
) ) )
)
)
)
/D
/E
/F
)
/D
/E
/F
1Q
1Q
Connection example 2:
Connection example 5:
Three-phase measurement, four conductors, asymmetric load,
with voltage transformer, with three current transformers
Three-phase measurement, three conductors, asymmetric load,
without voltage transformer, with three current transformers
;
;
;
)
) ) )
;
) ) )
)
/D
/E
/F
) ) )
/D
/E
/F
1Q
Connection example 3:
Connection example 6:
Three-phase measurement, four conductors, symmetric load,
without voltage transformer, with one current transformer
Three-phase measurement, three conductors, asymmetric load,
with voltage transformer, with three current transformers
;
)
/D
/E
/F
1Q
* Fuses must be provided by the user.
;
;
;
) ) )
)
)
) ) )
/D
/E
/F
** Connection of the supply voltage
Siemens LV 1 N Power Management System · 06/2008
13/17
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
Connection example 7:
Connection example 10:
Three-phase measurement, three conductors, asymmetric load,
without voltage transformer, with two current transformers
Three-phase measurement, three conductors, symmetric load,
with voltage transformer, with one current transformer
;
;
;
;
) ) )
13
) ) )
)
)
/D
/E
/F
) ) )
/D
/E
/F
Connection example 8:
Connection example 11:
Three-phase measurement, three conductors, asymmetric load,
with voltage transformer, with two current transformers
Two-phase measurement, three conductors, asymmetric load,
without voltage transformer, with two current transformers
;
;
) ) )
;
)
;
) )
)
/D
/E
) ) )
/D
/E
/F
1Q
Connection example 9:
Connection example 12:
Three-phase measurement, three conductors, symmetric load,
without voltage transformer, with one current transformer
Single-phase measurement, two conductors, without voltage
transformer, with one current transformer
;
;
) ) )
;
)
;
)
)
/D
/D
/E
/F
1Q
* Fuses must be provided by the user.
13/18
Siemens LV 1 N Power Management System · 06/2008
** Connection of the supply voltage
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
PAC3200 multifunction measuring instruments
Connection example 13:
Three-phase measurement, four conductors, asymmetric load,
with voltage transformer, with three current transformers
13 14 15 16 17
;
)
13
) ) )
NSE_01951
;
) ) )
/D
/E
/F
1Q
* Fuses must be provided by the user.
1
2
3
4
5
6
7 8 9 10 11 12
** Connection of the supply voltage
Fusing of the supply voltage input:
Fuse holders
Cylindrical fuse links
3NW7-5130HG
3NW1006-0HG (0.6A)
Connection graphics
8
1
7
Terminal
Function
$
%
&
(
)
*
+
Phase current, IL1, input
Phase current, IL1, output
Phase current, IL2, input
Phase current, IL2, output
Phase current, IL3, input
,
.
/
IL1 k
IL1 l
IL2 k
IL2 l
IL3 k
IL3 l
V1
V2
V3
VN
L/+
0
N/-
1
2
3
4
5
DIDI+
DODO+
Phase current, IL3, output
Phase voltage UL1
Phase voltage UL2
Phase voltage UL3
Neutral conductor UN
AC: Connection: Conductor (phase voltage)
DC: Connection: +
AC: Connection: Neutral conductor
DC: Connection: Functional ground
Digital input Digital input +
Digital output Digital output +
PAC3200 terminal assignment in detail
NSE_01950
1
No.
2
6
5
4
3
No.
$
%
&
(
)
*
+
Function
Digital inputs and outputs, functional ground
Slot not assigned
Supply voltage L/+, N/Measuring inputs voltage V1, V2, V3, VN
Measuring inputs current IL1, IL2, IL3
Slot for optional expansion modules
Optional expansion module, not included in the scope of supply
,
Ethernet interface
PAC3200 terminal assignment in overview
Siemens LV 1 N Power Management System · 06/2008
13/19
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
Expansion modules
PAC PROFIBUS DP
■ Technical specifications
Communication
PROFIBUS DP
Transmission rate max.
MBit/s 12
Protocol
PROFIBUS DPV1
Variables to be transmitted
Definable using GSD file
Enclosure dimensions (W x H x D)
Module enclosure for plugging onto the PAC3200
mm
43 x 63 x 22
Weight approx.
g
45
Degree of protection
IP20
Degree of protection according to
EN 60529
Ambient conditions
Temperature range
Operating temperature
°C
-10 … + 55
Storage and transport temperature
°C
-25 … + 70
%
95
m
2000
Relative air humidity
At 25 °C without condensation
Operating altitude
Above sea level up to max.
2
Degree of pollution
■ Dimensional drawings
Dimensions of the plug connector between the PAC PROFIBUS
DP expansion module and the PAC3200
63
22
43
■ More information
More information can be found on the Internet at
www.siemens.com/powermanagementsystem
13/20
Siemens LV 1 N Power Management System · 06/2008
7,5
6,44
NSE_01949
6
Dimensions of PAC PROFIBUS DP expansion module at the side
and from above
NSE_01948
13
Dimensions and weights
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
Expansion modules
PAC RS485
■ Technical specifications
Communication
RS485
Transmission rates
kBd
Optionally 4.8 / 9.6 / 19.2 / 38.4
Optionally SEAbus or Modbus RTU (selectable)
Protocol
Dimensions and weights
Module enclosure for plugging onto the PAC3200
mm
43 x 63 x 22
Weight approx.
g
41
13
Enclosure dimensions (W x H x D)
Degree of protection
IP20
Degree of protection according toEN 60529
Ambient conditions
Temperature range
Operating temperature
°C
-10 … + 55
Storage and transport temperature
°C
-25 … + 70
%
95
m
2000
Relative air humidity
At 25 °C without condensation
Operating altitude
Above sea level up to max.
2
Degree of pollution
■ Dimensional drawings
6,44
NSE_02001
63
7,5
NSE_02002
Dimensions of the plug connector between the PAC RS485
expansion module and the PAC3200
11
Dimensions of PAC RS485 expansion module at the side and
from above
22
43
.
■ More information
More information can be found on the Internet at
www.siemens.com/powermanagementsystem
Siemens LV 1 N Power Management System · 06/2008
13/21
© Siemens AG 2008
SENTRON Multifunction Measuring Instruments
13
Notes
13/22
Siemens LV 1 N Power Management System · 06/2008
© Siemens AG 2008
Appendix
Conditions of sale and delivery
Export regulations
■ Terms and Conditions of Sale and Delivery
By using this catalog you can acquire hardware and software
products described therein from Siemens AG subject to the following terms. Please note! The scope, the quality and the conditions for supplies and services, including software products, by
any Siemens entity having a registered office outside of Germany, shall be subject exclusively to the General Terms and
Conditions of the respective Siemens entity. The following terms
apply exclusively for orders placed with Siemens AG.
For customers with a seat or registered office in Germany
The “General Terms of Payment” as well as the “General Conditions for the Supply of Products and Services of the Electrical
and Electronics Industry” shall apply.
For software products, the “General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office in Germany” shall apply.
For customers with a seat or registered office outside of
Germany
The “General Terms of Payment” as well as the “General Conditions for Supplies of Siemens, Automation and Drives for Customers with a Seat or registered Office outside of Germany” shall
apply.
For software products, the “General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office outside of Germany” shall apply.
General
The dimensions are in mm. In Germany, according to the German law on units in measuring technology, data in inches only
apply to devices for export.
Illustrations are not binding.
Insofar as there are no remarks on the corresponding pages,
- especially with regard to data, dimensions and weights given these are subject to change without prior notice.
The prices are in € (Euro) ex works, exclusive packaging.
The sales tax (value added tax) is not included in the prices.
It shall be debited separately at the respective rate according to
the applicable legal regulations.
Prices are subject to change without prior notice. We will debit
the prices valid at the time of delivery.
Surcharges will be added to the prices of products that contain
silver, copper, aluminum, lead and/or gold if the respective basic
official prices for these metals are exceeded. These surcharges
will be determined based on the official price and the metal factor of the respective product.
The surcharge will be calculated on the basis of the official price
on the day prior to receipt of the order or prior to the release
order.
The metal factor determines the official price as of which the
metal surcharges are charged and the calculation method used.
The metal factor, provided it is relevant, is included with the price
information of the respective products.
An exact explanation of the metal factor and the text of the
Comprehensive Terms and Conditions of Sale and Delivery are
available free of charge from your local Siemens business office
under the following Order Nos.:
• 6ZB5310-0KR30-0BA1
(for customers based in Germany)
• 6ZB5310-0KS53-0BA1
(for customers based outside Germany)
or download them from the Internet
http://www.siemens.com/automation/mall
(Germany: A&D Mall Online-Help System)
■ Export regulations
The products listed in this catalog / price list may be subject to
European / German and/or US export regulations.
Therefore, any export requiring a license is subject to approval
by the competent authorities.
According to current provisions, the following export regulations
must be observed with respect to the products featured in this
catalog / price list:
AL
Number of the German Export List
Products marked other than “N” require an export
license.
In the case of software products, the export designations of the relevant data medium must also
be generally adhered to.
Goods labeled with an “AL“ not equal to “N” are
subject to a European or German export authorization when being exported out of the EU.
ECCN
Export Control Classification Number
Products marked other than “N” are subject to a
reexport license to specific countries.
In the case of software products, the export
designations of the relevant data medium must
also be generally adhered to.
Goods labeled with an “ECCN“ not equal to “N”
are subject to a US re-export authorization.
Even without a label or with an “AL: N” or “ECCN: N”, authorization may be required due to the final destination and purpose for
which the goods are to be used.
The deciding factors are the AL or ECCN export authorization
indicated on order confirmations, delivery notes and invoices.
Errors excepted and subject to change without prior notice.
A&D/VuL_ohne MZ/En 05.09.06
© Siemens AG 2008
Get more information
Low-Voltage Controls and Distribution
www.siemens.com/lowvoltage
Siemens AG
Industry Sector
Industrial Automation Systems
Postfach 48 48
90026 NÜRNBERG
GERMANY
www.siemens.com/automation
Subject to change without prior notice
PDF only: (E86060-K1002-A211-A2-7600)
KG 0708 28 En / 803029
© Siemens AG 2008
The information provided in this catalog contains descriptions or
characteristics of performance which in case of actual use do not
always apply as described or which may change as a result of
further development of the products. An obligation to provide
the respective characteristics shall only exist if expressly agreed in
the terms of contract. Availability and technical specifications are
subject to change without notice.
All product designations may be trademarks or product names
of Siemens AG or supplier companies whose use by third
parties for their own purposes could violate the rights of
the owners.