LAMP MODULE:
MPT-S MONOPOINT SURFACE MOUNT-SQUARE LED
526 Portal Street
Cotati, CA 94931
USA
Project Name
P 707.794.0888
Date
F 707.795.4379
Type
www.8lighting.com
Prepared By
All No. 8 Lighting fixtures and components are UL/CSA listed.
No. 8 Lighting trims and lamp modules are protected by one or
more U.S. Patents. No. 8 Lighting reserves the right to change
details of design, materials, and finish.
Comments
Catalog #
MPT-S –
–
/
/
© 2014 No. 8 Lighting
Doc # 91202-06
/
PRODUCT FEATURES
•Fully adjustable head rotates 320° and tilts 110°. Use for adjustable accent, wall wash,
and general lighting applications.
•Ceiling or wall mountable (see installation note below).
• All aluminum construction for maximum heat dissipation.
•Multiple lengths available: 6” (standard), 12”, 18”, and 24”.
•UL damp listed.
LED Light Engine
•SD-500 85 CRI / 3000K LED light engine. Delivers up to 900 lumens at 15 watts (output
may vary depending on lens options used).
•HI-500 95 CRI / 3000K LED light engine. Delivers up to 770 lumens at 15 watts (output
may vary depending on lens options used).
•Industry leading color consistency with guaranteed maximum variation of 1 x 3 SDCM.
•50,000+ hour lamp life (measured at 70% lumen maintenance).
•Dimming electronic driver with 120v/60Hz input standard. Dimmable to 5% using two-wire
electronic low voltage (reverse phase) dimmers. See dimmer compatibility matrix for list of
qualified dimmers.
• Entire lamp module and light engine assembly is field replaceable from below ceiling.
Accessories/Options
•Features and broad range of field interchangeable optical diffusers and color filters: 15°,
20°, 30°, 40°, 60°, 12° x 80°, 2400K, 2700K, and 3500K.
•Optional ST snoot accessory for improved glare control (note: adds ¾” to overall length).
Warranty
All No. 8 Lighting products are warrantied for five years.
CEILING MOUNT
7/16"
5"
5"
Specify
6”, 12”,
18” or 24”
5 3/4"
INSTALLATION NOTE:
Must be installed to minimum 15.5 Cu In
Octagonal or Round J Box in wall or ceiling. Monopoint cannot mount to smaller
boxes or standard mud ring.
WALL MOUNT
(SHOWN W/ ST ACCESSORY)
MPT-S
LED MONOPOINT SURFACE MOUNT – SQUARE
Use for adjustable accent, wall wash, and general lighting
applications requiring the lumen output and high color
rendering of tungsten halogen along with greater luminaire
efficiency, a 50,000+ hour lamp life, and dimming
capability.
31/4"
Ø 21/2"
Add 3/4"
for ST accessory
0-110°
Add 3/4"
for ST accessory
PRODUCT SPECIFIER/PRODUCT ORDER NUMBER
MPT-S –
–
OVERALL LENGTH
–
–
(Inches)
MPT-S
Monopoint
Surface Mount – Square
6 (standard)
12
18
24
/
LIGHT ENGINE
/
/
FINISH
/
OPTICAL
//
ACCESSORIES*
SD-500
WH
NSP
85 CRI/3000K
900 lumens at 15 watts
SA
SP
HI-500
95 CRI/3000K
770 lumens at 15 watts
White
Satin Aluminum
OB
Oil-Rubbed Bronze
BK
Black
15° narrow spot
20° spot
NFL
ADDITIONAL
ACCESSORIES
ST
Snoot Accessory
(Adds 3/4” to overall
length)
30° narrow flood
FL
(Standard) 40° flood
WFL
60° wide flood
LS
12 x 80° linear spread
CF24
2400K color filtering lens
CF27
2700K color filtering lens
CF35
3500K color filtering lens
WH - White
SA - Satin Aluminum OB - Oil-Rubbed Bronze
*40° diffuser included standard. Optical accessories and additional options shipped separately.
BK - Black
91202-06