HOUSING: 803-4Q - I.C. MULTI-LAMP
LAMP MODULE: J, K, or L LED
526 Portal Street
Cotati, CA 94931
USA
Project Name
P 707.794.0888
Date
F 707.795.4379
Type
www.8lighting.com
Prepared By
Catalog # L2-
803-4Q /
-
-
// L1/L3-
-
-
-
/L4-
All No. 8 Lighting fixtures and components are UL/CSA listed.
No. 8 Lighting trims and lamp modules are protected by one or
more U.S. Patents. No. 8 Lighting reserves the right to change
details of design, materials, and finish.
/
-
-
© 2014 No. 8 Lighting
Doc # 91153-07
PRODUCT FEATURES
Housing
•IC-Rated for direct contact with thermal and spray foam insulation.
•Airtight – meets Washington State Airtight Standard WAC 51-11-05-02 and
tested in accordance with ASTM E283 to reduce energy loss and sound
transmission.
•CCEA plenum rated and approved for City of Chicago environmental air
spaces.
•Accepts four LED lamp modules which can be intermixed and individually
controlled.
•Accepts all Number Eight Lighting Seamless and Inset Series trim assemblies.
•All aluminum construction for maximum heat dissipation and corrosion
prevention.
•Features cross-hair graphics for precise alignment during installation.
•Large capacity junction box with (12) ½” knock-outs.
•Extra rigid bar hangers with four lock down points and integral screws.
•Additional housing mounting options include TBC T-Bar mounting clips (set of
four) and PMB panel mount brackets (set of two).
24-3/8”
5 1/2”
6 7/16”
803-4Q
Type IC Housing
20”W x 24 3/8”L x 5 1/2”H
Accepts four lamp modules.
6 7/16”
20”
LED Lamp Modules / LED Light Engines
•Available LED lamp modules include: J - Adjustable, K- Fixed, and L-Wall wash.
•SD-500 85 CRI/3000K. Delivers up to 900 lumens at 15 watts.
•HI-500 95 CRI/3000K. Delivers up to 770 lumens at 15 watts.
•Industry leading color consistency with guaranteed maximum variation of 1 x 3
SDCM.
•50,000+ hour lamp life (measured at 70% lumen maintenance).
•Dimming electronic drivers with 120v/60Hz input standard. Optional 230v/5060Hz and 277v/60Hz available. Dimmable to 5% using two-wire electronic
low voltage (reverse-phase) dimmers. See dimmer compatibility matrix for list of
qualified dimmers.
•Lamp module and light engine assemblies are field replaceable from below the
ceiling.
•Features a broad range of field interchangeable optical diffusers and color
filters: 15°, 20°, 30°, 40°, 60°, 12° x 80°, 2400K, 2700K, and 3500K.
J – LED ADJUSTABLE
Fully adjustable lamp module featuring 0-45° vertical
and 365° horizontal adjustment. Use for adjustable
accent, wall wash, and general lighting applications.
Available LED light engines include:
SD-500 85 CRI/3000K. Delivers up to 850 lumens at
15 watts.
HI-500 95 CRI/3000K. Delivers up to 700 lumens at
15 watts.
K – LED FIXED POSITION
Fixed position lamp module. Use for general lighting
applications.
Available LED light engines include:
SD-500 85 CRI/3000K. Delivers up to 900 lumens at
15 watts.
HI-500 95 CRI/3000K. Delivers up to 770 lumens at
15 watts.
L-S – LED WALL WASH SQUARE
Fixed position lamp module. Use for wall wash applications.
Available LED light engines include:
SD-500 85 CRI/3000K. Delivers up to 500 lumens at
15 watts.
HI-500 95 CRI/3000K. Delivers up to 400 lumens at
15 watts.
L-R – LED WALL WASH ROUND
Fixed position lamp module. Use for wall wash applications.
Available LED light engines include:
SD-500 85 CRI/3000K. Delivers up to 500 lumens at
15 watts.
HI-500 95 CRI/3000K. Delivers up to 400 lumens at
15 watts.
803-4Q with FS-P trim
803-4Q with FR-P trim
Warranty All No. 8 Lighting products are warrantied for five years.
91153-07 PAGE 1
PRODUCT SPECIFIER/PRODUCT ORDER NUMBER
803-4Q
24 3/8”
//
VOLTAGE
/
OPTIONS
HOUSING
120
L1 L2
TBC T-BAR MOUNTING CLIPS
(Standard)
120v 60Hz
(Set of four) included with
housing.
230
Bar
Hangers
(for joist mounting)
included standard.
6 7/16”
HOUSING
ACCESSORITES
6 7/16”
L3 L4
PMB PANEL MOUNTING
230v 50-60Hz
BRACKETS
(Set of two) included with
housing.
277
277v 60Hz
20.0”
A combination Lamp Module with desired Light Engine and optional Optical Accessory (if needed) is required for each lamp position. Lamp Modules can be
intermixed within the same housing and are independently controllable.
L1 LAMP
MODULE
LIGHTOPTICAL
ENGINEACCESSORY
/ L2 LAMP
MODULE
LAMP MODULE
-
/ L3 -
LIGHTOPTICAL
ENGINEACCESSORY
–
LIGHT ENGINE
LAMP
MODULE
LIGHTOPTICAL
ENGINEACCESSORY
–
SD-500
J
LED adjustable
HI-500
95 CRI / 3000K
700 lumens at 15 watts
SD-500
K
LED fixed position
HI-500
95 CRI / 3000K
770 lumens at 15 watts
L-S-XX*
LED wall-wash SQUARE
*Finish Options: WH, PN, SN,
PB, SB, OB, BK
40° optical lens included
standard.
LAMP
MODULE
LIGHTOPTICAL
ENGINEACCESSORY
OPTICAL ACCESSORIES
NSP 15° narrow spot
SP 20° spot
NFL 30° narrow flood
FL (Standard) 40° flood
WFL 60° wide flood
LS 12° x 80° linear spread
CF24 2400K color filtering lens
CF27 2700K color filtering lens
CF35 3500K color filtering lens
85 CRI / 3000K
900 lumens at 15 watts
40° optical lens included
standard.
-
NSP 15° narrow spot
SP 20° spot
NFL 30° narrow flood
FL (Standard) 40° flood
WFL 60° wide flood
LS 12° x 80° linear spread
CF24 2400K color filtering lens
CF27 2700K color filtering lens
CF35 3500K color filtering lens
85 CRI / 3000K
850 lumens at 15 watts
40° optical lens included
standard.
/ L4 -
SD-500
CF24 2400K color filtering lens
CF27 2700K color filtering lens
CF35 3500K color filtering lens
85 CRI / 3000K
500 lumens at 15 watts
HI-500
95 CRI / 3000K
500 lumens at 15 watts
L-R-XX*
LED wall-wash ROUND
*Finish Options: WH, PN, SN,
PB, SB, OB, BK
40° optical lens included
standard.
SD-500
CF24 2400K color filtering lens
CF27 2700K color filtering lens
CF35 3500K color filtering lens
85 CRI / 3000K
500 lumens at 15 watts
HI-500
95 CRI / 3000K
500 lumens at 15 watts
*LED wall-wash modules are shipped separately and require finish selection to match desired trim finish. Refer to LED lamp module L details below.
Lamp Module L incorporates the magnetic trim plate into the lamp module assembly, and is available with either a SQUARE trim plate (Seamless SeriesTM and Inset
SeriesTM), or ROUND trim plate (Seamless SeriesTM only).
Lamp Module L patent pending lens and lamp holder system designed to evenly wash walls. Trim kit assemblies are available for plaster, wood, stone or acoustic tile ceilings.
Lamp Module L is available in many designer finishes:
WH-WHITE PN-POLISHED NICKEL** SN-SATIN NICKEL**PB-POLISHED BRASS** SB-SATIN BRASS**
OB-OIL-RUBBED BRONZE** BK-BLACK**
**Lot variations in specialty finishes may occur. Ordering ALL trim kits and matching L Modules at the same time is recommended to minimize variations in finishes.
91153-07 PAGE 2